How to cancel automatic. How do I cancel automatic charges for my Apple Music subscription? Using msconfig

Sometimes a situation arises when you need to disable autorun of some programs in Windows 7 in order to reduce significant resource consumption and speed up the computer, namely Reduce system boot time when turned on.

The fact is that some programs, after installation, set themselves to autostart when you turn on the computer.

Now we will look at several ways to disable autorun of programs that you do not need.

But be careful, because some programs are necessary for the system to operate and are utility programs. Disabling them may affect some functionality of the Windows 7 operating system and its security.

We remove programs from the startup folder through the start menu

This method may already be familiar to you; if you have been using a computer for a long time, you could accidentally discover it yourself without any additional information, but for beginners the information may still be new.

Go to the Start menu > All Programs and find the Startup folder.

Everything that is there starts when the computer is turned on. To prevent these programs from running, simply remove them from there.

We use the standard Windows 7 utility - MSConfig

This utility, MSConfig, is already on your computer by default and you don’t need to install it, you just need to run it and use it.

And it’s very simple to launch it:

Open the Start menu again and type msconfig in the search bar.

It will be found immediately, all you have to do is click on its shortcut to launch it.

If for some reason you don’t have a search bar in the Start menu, you can simply press the Win+R key combination and the following window will open:

Enter msconfig there and click “Ok”.

As a result, the msconfig utility should start. It looks like this:

Go directly to the Startup tab. By unchecking the boxes you will disable unnecessary programs. But if you don’t understand what each of them is responsible for, then it’s better not to disable it.

After you click OK, you will be prompted to restart your computer, but you don't have to.

This utility is very convenient, but it is also not functional enough, because... is not able to provide us with the ability to disable absolutely all (any) programs from startup.

So we'll look at a few more ways.

Manual removal from the Windows 7 registry

Launch the registry editor. To do this, press the usual key combination “Win ​​+ R” or again in the search bar in the “Start” menu we type the words “regedit”.

A very scary, incomprehensible window opens with many folders that look more like gobbledygook than names.

But we are not afraid, but calmly understand everything and gain knowledge!

Among these folders, in the distant wilds, there are two autorun sections of the “seven”:

general (local registry), which is used for all users, the address is:
Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run

personal register - for the current user, at the following address:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

That is you need to go to the Run folder, expanding the folder tree one by one.

They contain files that run along with Windows and you can easily delete them as usual - by right-clicking and selecting “delete”.

You can first go to the first address, clean it there, and then start on the second.

Disabling autorun of programs using third-party software

Now we will talk about the third-party program Autoruns, which is distributed completely free of charge (freeware), but at the same time is very powerful and functional - in just a couple of clicks it can disable absolutely everything that can automatically start when you turn on the computer.

Download Autoruns program You can follow the link from the official website: http://download.sysinternals.com/files/Autoruns.zip(521 KB)

At the office The website has an English version, but we can easily understand it, even without knowledge of this foreign language.

The downloaded archive has a .zip extension and can be unpacked with any archiver.

There are 4 files in the folder. We are interested in “autoruns.exe”, which we launch (it is advisable to right-click on the file icon and select “run as administrator”).

When we first launch, we will be asked to accept the license agreement, which we will do by clicking on the “Agree” button.

The program looks like this:

We immediately see the “Everything” tab, which is a list of absolutely all startup objects.

But in order not to get lost there, there are tabs in which all this is broken down separately: Winlog, Drivers, Explorer, etc.

If you uncheck the box, we will disable autorun. If you click on a line, below you can see a description of the object: the version of the program, where it is located on the computer, size, etc.

In the “Logon” tab there is a list of programs that we could disable using the previous methods described in the article.

You may notice that some lines are highlighted in pink - these are simply objects that do not have a detailed description, and those whose files are deleted and can no longer be loaded, but are simply listed, are marked in yellow. Those. they may not be deleted.

Again, be careful when disabling something you know nothing about. Perhaps this is necessary for the main operation of Windows 7 and after disabling these services, the computer will not work as it should.

For the laziest we provide video tutorial of the whole process:

As you know, the seventh version of Windows OS automatically downloads and installs updates. The operating system communicates with the Microsoft host whenever the computer connects to the Internet. Theoretically, this behavior should have a beneficial effect on the operation of the PC, because the installed packages are developed specifically to eliminate found vulnerabilities and optimize the operation of programs. However, in practice, the best option is to disable automation. How to cancel Windows 7 updates and why to do it will be discussed in the article.

The main reasons for disabling the built-in update utility

• The main problem caused by updates is sudden crashes and critical errors after completing the installation procedure.
• The operating system stores all downloaded packages. Over time, there are a lot of them, and this reduces the free space on your hard drive. When the value of this parameter reaches a critically low level, the OS will simply refuse to boot.
• When the Windows 7 update program downloads the files it needs, surfing the Internet becomes uncomfortable. This problem occurs especially often among users connected to a “narrow channel”. If the provider limits the amount of traffic per unit of time, automatic updates can hit your pocket.
• If the patch installation process is running, the computer cannot be turned off until all operations are completed.
• If a pirated version of Windows is used on the computer, the scenario of limiting the functionality of the computer after installing the next package is real.

using administration tools

The first way to disable updates involves completely refusing them. To do this, you will need to disable the built-in Windows service.

1. Launch Control Panel.
2. Expand the "Administration" section.
3. Several items will be displayed in the window. Click on "System and Security".
4. Among the icons that appear on the screen, find “Administration”.
5. Double-click the "Services" shortcut.
6. Scroll to the very end of the list.
7. Select Update Center.
8. In the window that opens, opposite “Startup type” in the drop-down list, set “Disable”.
9. Here, click on the “Stop” button.
10. Now all you have to do is click on “Apply”.

After this operation, the OS will no longer contact the Microsoft site to check and download new patches. To re-enable the service, follow the same steps, but set the Startup Type switch to Automatic and restart your computer.

Disabling automatic mode only

How to cancel Windows 7 updates that are downloaded automatically, but leave the option to install manually?

1. Launch Control Panel.
2. In the window that appears, click on the “Update Center” item.
3. Click on the "Center Setting" button. It is located on the left side of the interface.
4. Set the switch to the “Do not check” position.
5. Click "OK" at the bottom right of the window to confirm the changes.

Removing patches: preparation

If, due to the installation of a particular patch, the system begins to become unstable, it is recommended to remove the update package for Windows 7. To do this, first boot the OS in safe mode. To do this, hold down the F8 key until the BIOS information messages disappear from the screen. If pressing F8 will bring up a menu with a list in English, select Safe Mode, in Russian, respectively, “Safe Mode”.

When this approach doesn't work, try this:

1. Create an empty shortcut on your desktop.
2. In the “Object location” column, copy cmd.
3. Click on “Next” several times.
4. Now expand the shortcut context menu and select Run as administrator.
5. A command line will open, enter bcdedit /set (default) bootmenupolicy legacy.
6. All you have to do is press “ENTER”.

After this, safe mode will definitely turn on.

Removing patches using standard means

It is important that the Windows 7 update check is disabled before following the next instructions, otherwise the patches will be installed again automatically.

1. After turning on the PC, go to the “Control Panel”.
2. Click on the “Programs” line with the left mouse button.
3. Find the View Updates link in the table on the left.
4. A list of all previously installed patches will appear on the display.
5. To remove any of them, right-click on the name of the desired package, and select “Delete” in the menu that opens.

Conclusion

Any tool is good if used skillfully. Utilities built into the operating system were created to ensure computer security and user comfort. Before canceling Windows 7 updates, weigh the pros and cons. The best choice would be to disable only the automatic operating mode. At the same time, you should regularly check for patches and be sure to install those that are designed to close holes in the security of your computer. Without them, no modern antivirus or antispyware programs will be able to protect the OS.

Have you noticed that every time you turn on your computer, some programs installed on it start automatically? If this interferes with operation, you can disable automatic activation of programs. In this guide we will give some tips on how to do this.

Using CCleaner

Download, install and launch CCleaner.

Open Tools > Start and select Disable / Turn on for the program you need:

Using msconfig

Msconfig is a Microsoft tool for managing programs that are activated when Windows starts.

Click menu Start and select Execute. Or simultaneously press the [ Windows] + [R] to open the tab Execute. In the window that appears on the screen, enter msconfig and press OK. In the window system configuration go to the tab Launch. Select from the list and uncheck the boxes of those programs that you do not want to run when turned on Windows. Click OK to save changes:

You will be prompted to restart your computer, which is optional. But if you do reboot, then immediately after startup a window will appear on the screen in which you need to check the box next to the command Don't show this window again and press OK so that it does not appear every time you start your PC.

N.B. Windows 8 does not require a reboot after these changes.

Using WinPatrol

WinPatrol is a similar program.

With StartUpLite

StartUpLite is a small software released by the developers of Malwarebytes" Anti-Malware.

Easy to use, it allows you to disable or remove unnecessary programs to optimize your computer startup.

Download it to your computer and run it to open the program window:

The list of programs will already be given in the section Disable, All you have to do is click Continue to turn them off.

You can also uninstall a program by checking the box Delete, but you need to be very careful with this option.

If you are in doubt about any item in the list and would prefer to save the program at startup, simply check the box No action, then click Continue.

If you want to reactivate the service, simply click the link at the top of the window Restore disabled items, and you will immediately go directly to the system setup utility MSConfig.

Windows updates are sometimes of dubious value. In the case of the tenth version, all updates except the first after installing the system are very specific and controversial. Moreover, they always start unexpectedly, without notifying the user, and their sudden use causes a long reboot of the computer. However, you can interrupt updates at absolutely any stage.

How to quickly abort an update

If you want to quickly abort a Windows 10 update, depending on its stage, the first thing you need to do is the following:

• if the update has just started downloading, disconnect from the Internet;
• if the update has downloaded and the system asks to restart to apply it, do not do this under any circumstances;
• If installation or application of updates begins when you turn on/off/restart the system, turn off the computer by holding down the power button on the case.

Regardless of the option you are faced with, all further steps will look almost the same. Now you need to start canceling the update that has started. For the last problem, start the system in safe mode.

Starting the system in safe mode

Starting the system in safe mode is guaranteed to help start the computer without installing downloaded updates.

If you skipped downloading updates and turned off your computer, canceling them will have some difficulties: every time you try to log in, an attempt will be made to apply the updates. This problem has been fixed in later versions of Windows 10, but it's best to start your computer in Safe Mode just in case.

How to cancel an update

The described method is suitable for quickly interrupting an ongoing update. Now the update needs to be canceled so that you can safely turn on the Internet or restart your computer.

There are several ways to cancel an update that has started. For example, enable a metered connection or Airplane mode. However, such methods will only interrupt the downloading of new packages and will not prevent the installation of already downloaded ones. The only way to guarantee that an update has started is through the command line.

To resume the update, you need to repeat the above commands, replacing stop with start.

How to permanently disable downloading updates

The method mentioned in canceling the update also includes prohibiting further system updates. But there are others that will be more convenient and reliable in the long term.

Via Group Policy Editor

This method will not work for the home version of Windows and some unlicensed versions of the system, but by using it you will retain the ability to manually run system updates.

Through services

This method is available on all versions of Windows, but it completely prohibits system updates: you will not be able to download updates even by running the scan manually (the scan will run, but will not be able to find anything).

Via Registry Editor

This method can be considered the most correct, but also the least safe: it makes changes directly to the system configuration, and you can cancel it only by doing the same steps again. If you intend to use this method, save the path to the parameter you are changing somewhere so that you can roll back the changes.

Via Windows Update

Blocking updates through Windows Update is official, but it is also the least reliable. In this way, you mark your own Internet connection as metered: updates are not downloaded through such connections in order to save traffic.

Apple provides a three-month free trial subscription to the Apple Music service, but requires you to enter payment information when connecting to the service. If you do not unsubscribe in advance, your bank card will be debited monthly in accordance with the selected tariff plan: 169 rubles for an individual service or 269 rubles for a family service of up to six people.

For those who started using Apple Music today, their money will be debited on October 1st. Before this time, a lot of things can happen - for example, you may be completely disappointed in music and you will not need any music services.

To avoid being charged as an unpleasant surprise, you can cancel your subscription right now and pay money only when you are one hundred percent sure that you want to continue using Apple Music. You can cancel your subscription through the music player on iOS 8.4 or the program on Windows or Mac.

In the player on iOS 8.4, you need to click on the silhouette, which is shown on the main page in the upper left corner and log into your Apple ID account. At the bottom of the page there will be a link to the section for managing subscriptions. Go into it - you will see all your active and inactive subscriptions. Here you can change the type of Apple Music subscription (individual or family) or disable its auto-renewal with a toggle switch, which magically appears in iOS 8.4 from iOS 4. After cancellation, funds will not be debited.

In the same way, you can manage subscriptions on your computer through iTunes. Launch it, go to the iTunes Store section, find the “Account” link, click it, enter your Apple ID password, scroll down to settings and go to the subscriptions section. In it you can disable automatic debits from your bank card, including for Apple Music.

It's important to note that once you turn off automatic charges, you'll be able to use Apple Music for the entire trial period. This does not affect the functionality of the service in any way.