How to increase the sound on a Windows 8 laptop. How to make the sound louder on a laptop. Magnification using the program

All the best to everyone!

From my own experience, I can say that users most often encounter the problem of quiet sound when reinstalling Windows OS (less often when replacing equipment with new ones).

In general, there is a quiet difference: if you turn up the volume to 100%, and the sound is barely audible, then the problem is obvious, but if you expect the volume from a budget laptop to be like music. center - no comments here, my article is unlikely to help you.

In this article I would like to give several reasons why the sound may deteriorate (crackling, grinding noises may appear) and the volume may decrease. In general, I will give tips on increasing the volume. So...

Causes of quiet sound. How to amplify the sound!

1) “Fine” sound tuning: loudness compensation and communication

Now about something more interesting - about communication...

There is such an option in Windows as “communication” - the point is that “smart” Windows reduces the volume when using the computer for conversations (i.e., as if it does a plus for you - so that you can hear the interlocutor better). But it happens that this option works very poorly - and it always reduces the sound, and not just during conversations...

To check this: click on sound icon in the tray (next to the clock) and open the “Sounds” link (see screenshot below). Then open the tab "Connection" and set the slider "no action required" (see point 2-3 on the screen below). Save the settings and restart your computer (the last step is mandatory!). Then test what the volume is.

A few words about loudness compensation

There is another option in Windows that can significantly affect the volume. We're talking about subtleness - special option to eliminate loudness differences taking into account the peculiarities of human perception. If you have problems with quiet sound, I recommend this enable option .

To do this you need to go to settings "SOUND", open tab "Play" , then select your playback source (speakers, headphones) and go to them properties (see screenshot below, arrow 1-2).

Then open the "Improvements" tab and in the properties find the option "Loudness of Compensation" - turn it on, save the settings and check the sound quality again (by the way, in Windows 8.1 this option is called a little differently - “Advanced features/volume equalization”).

Loudness compensation

2) Checking connectors and wires

One of the most common causes of sound distortion, noise, crackling, and decreased volume is poor contact between the speakers of the speakers (headphones) and the computer sound card.

This most often occurs due to “broken” connectors and plugs, as well as damage to the wire insulation (an example of a torn headphone wire is shown in the photo below). If such defects appear, I recommend replacing the wire (or re-soldering it, if you have such experience...).

Broken headphone wire

In general, a wire tear may not be “visible” - i.e. the braid on top will be unharmed, while the copper core inside will be damaged. Try to twist the wire, and if the sound disappears or appears, there is distortion - the problem is obvious.

You can also check your headphones (speakers) by connecting them to another PC (tablet, music center, etc.). If the problem is related to the connectors on the sound card, then either repair it or use an external sound card. Now, for example, there are such “babies” the size of a regular flash drive, while many of them can produce sound quality no worse than built-in sound cards.

3) Checking and updating drivers

Drivers are to blame for every 3-4th sound problem! More precisely, their absence, or the wrong version for a given OS.

In general, most often, if there are problems with the sound driver, there is no sound at all (I apologize for the tautology). But it happens that there was (for example) Windows 7 - and then it was updated to Winodws 8/10. According to my observations, after such an update, there are problems with sound...

In Device Manager, open the tab "Sound, gaming and video devices" . This tab should display your sound card (for example, in the screenshot below - Realtek High Definition Audio).

If instead the tab is empty, or you see the “Unknown device” icon with a question mark, then there is no driver.

Important! If you have problems with audio drivers, I recommend reading the following article:

To update the driver on Windows - just right-click on the device (for which you are updating drivers), and select from the context menu "Update drivers" (arrow 1-2 on the screenshot below).

For example, the screenshot below shows the program (available from the link above) Driver Booster, with which you can update the sound driver in 1 click... Convenient? Comfortable!

Update audio driver in 1 click!

4) Setting up an audio driver: using Realtek as an example

The volume also depends on the settings of the audio driver (and on the version of the driver itself, but this was discussed a little higher. I propose to consider the settings based on one of the most popular drivers - Realtek...

4.1 Device selection

When you connect any device to the input of a sound card, as a rule, a message from the Realtek driver pops up asking you to indicate what kind of device you connected. The volume level also depends on the correct type of device.

In some cases, forced switching of the device type helps: from headphones to speakers (or vice versa). Try both options.

Note: to open the window for selecting the type of device to be connected, try removing the plug from the speakers (headphones) from the sound card and inserting it again.

4.2 Adjusting the playback volume level

In the Realtek sound card control panel there are several volume sliders (something like a mixer in Windows). For example, if your Front slider is set to 60% (and the speakers are connected to the front side of the system unit), then until you raise it to 100%, the sound will not get louder!

So a simple tip: open the mixer in Realtek and set all the volume sliders (that will be there) to 100%!

Addition! If you have headphones (speakers) connected to the front panel of the system unit, try connecting them to the back side.

If you have weak sound only when watching movies or listening to music, then most likely the problem is in the audio-video codecs (or players).

The advice here is simple: REMOVE completely all codecs from the system and try installing the K-Lite Codec Pack (detailed description here:). Moreover, when installing, be sure to turn on the mode "Lots of stuff", as in the screenshot below. This way you will get all the necessary and modern codecs for today).

How to install codecs correctly...

By the way, pay attention to the VLC player - it is not only good for playing network video, but also for watching video from your hard drive. It has an option by increasing the sound volume up to 125%!

Best codecs (in my opinion) -

10 Free Players for Windows -

6) Programs to enhance volume

Programs to increase volume on a computer -

• installed, configured once and it works (starts every time you turn on the computer);
• increase the volume up to 500%!
• supports all popular programs, games, players, etc.: Skype, ICQ, Windows Media Player, etc.

That's all for me. I hope at least one recommendation works!

Thanks in advance for any additions on the topic. Good luck!

Today's laptops can be as powerful as desktop computers, with the added benefit of portability. They are light and compact, they can be taken on the road, they can work without recharging from 4 to 11 hours, and that's not the limit. But laptops also have their drawback - relatively weak built-in speakers. In small enclosed spaces, the volume of the sound they produce is usually enough for more or less comfortable listening to music or voice communication, but this is not always the case.

Reasons for quiet sound on a laptop

In some cases, the sound is so quiet that you almost have to put your ear close to the speaker to hear anything. Too quiet sound on a laptop can be due to a number of reasons, both software and hardware. If, say, one audio file is played barely audibly, and another in the same program is much louder, then the reason is incorrect file encoding; the laptop is not particularly “faulted” in this.

The volume also depends on the applications running with sound. For example, the built-in Windows player has a quieter sound than VLC or other third-party players. At the system level, drivers that are not entirely suitable for a particular sound card are often the reason for the initially low volume or its decrease after updating the operating system to a new version. In such cases, replacing Microsoft drivers with “native” drivers downloaded from the manufacturer’s website can increase the volume on the laptop.

Finally, the reason often lies in the laptop itself, or rather in its weak speakers. Laptop manufacturers often skimp on devices that reproduce sound, although we must admit that there is a reason for this. Firstly, nothing prevents the user from connecting external speakers, and secondly, due to the design features of the laptop, placing powerful speakers inside its case is not a very simple task. All this, of course, does not mean that you should put up with poor acoustics. Now we will show you how to make the sound louder on a laptop if it is already at maximum.

Ways to increase the sound level on a laptop with Windows 7/10

So, how to enhance the sound on a laptop using standard OS tools, without resorting to the help of special programs. The first step is to check your Windows audio settings. Their availability and scope will depend on the driver used and operating system version.

Right-click on the sound icon in the tray, select “Playback Devices” from the menu, select “Speakers” in the window that opens and click the “Properties” button.

In the next window, switch to the “Enhancements” tab, activate the “Bass Boost” option and click “Settings”.

Try playing with the settings in the small window that opens, changing the “Frequency” and “Boost Level” parameters, while checking the result in the “Advanced” tab.

By default, the value of the first parameter is set to 80 Hz, for the second – 6 dB. Increase the values ​​to the maximum, check the “Loudness Equalization” box and apply the settings. This should increase the sound on the laptop.

As an aid, you can set the maximum bit depth and sampling rate values ​​on the Advanced tab.

In Windows 8.1, it doesn't hurt to experiment with the Enable Sound Equalizer and Enable Room Correction settings in the Enhancements tab.

This is approximately how things stand if you use a standard Microsoft driver. If you have an audio driver from Realtek installed, you can enhance the sound on your laptop using the Realtek HD manager. This is a more convenient way, since all the tools are located on one panel. Its appearance, however, will differ depending on the driver version and motherboard manufacturer. Open Realtek HD Manager from the classic Control Panel. Next, switch to the “Sound Effects” section, turn on the equalizer and set all the sliders to the top position, then check the “Loudness” box and save the settings.

The best programs for sound amplification

Finally, audio amplifiers for laptops allow you to make the sound louder - special programs that allow you to adjust audio settings at the system level.

Equalizer APO

This advanced parametric equalizer works at the operating system level, allowing you to customize the sound in all applications, including system ones. During the installation process, the program will ask you to specify the device with which it will work, select the speakers. After installing the application, you will need to restart your computer. The sound parameters are adjusted by dragging the points of the equalizer curve; we achieve a suitable result experimentally.

All changes become apparent in real time, settings are saved automatically, and there is a function to reset parameters to default values ​​(“Reset response” button). Using Equalizer APO is a great way to increase the volume on a laptop if it's already at maximum, and with the help of this program you can very flexibly adjust the tone and modulation of the sound.

A program to enhance sound on a laptop for those who do not want to bother with manual equalizer settings. Allows you to increase the sound volume up to 500% in most programs, including media players, instant messengers, browsers, etc., and is easy to use and easy to manage. Sound Booster has its own volume control panel, which can be called up by clicking on the program icon in the system tray. By dragging the slider on this panel, you can increase the sound on your laptop by several orders of magnitude, even if the volume seems to be at maximum according to Windows indicators.

There are several operating modes available; if one is not suitable, nothing prevents you from switching to another. An important advantage of the application is the presence of built-in filters, thanks to which there is no gross distortion of the sound, as is often the case in similar, but not very high-quality programs. Unfortunately, Sound Booster is a paid product; it works in trial mode for 14 days.

ViPER4Windows

A program similar to Equalizer APO, but with even more settings. Allows you to change sound parameters at the OS level, supports adding various effects, compression, digital reverb, creating surround sound, and so on. Increasing the volume in ViPER4Windows is achieved by adjusting the equalizer, again experimentally. During the installation process, the program will ask you to specify the devices with which it will work; once the setup is complete, you will need to restart the computer.

Conclusion

Well, now you know how to increase the volume on a laptop with Windows 7/10. Additionally, it makes sense to install the K-Lite Codec Pack; although it has no settings, in general it can improve the sound quality of audio in different programs. When it comes to tools like Equalizer APO or Sound Booster, keep in mind that they need to be used with some caution. By pushing the volume to maximum, you force the speakers to work at their limit, which does not have the best effect on their physical condition.

The problem of quiet sound playback is most often encountered by laptop users. This fact is very sad, because because of this nuance it is impossible to fully enjoy, for example, watching a movie. Fortunately, these days there are various ways to increase the volume of playback files.

The article will talk about what programs there are to increase sound. Their features and installation method will be discussed. Regular Windows tools will also be included in the discussion. All this is presented with detailed setup instructions.

Magnification using standard means

Before we start listing programs for increasing sound, it’s worth talking about how to increase it using regular utilities that are present in every build of the Windows operating system. At a minimum, this is good because you don’t have to download software and thereby clog up your hard drive.

So, initially you need to get into the “Sound” menu. To do this, right-click on the speaker icon, which is located in the bottom panel on the right. In the context menu you need to click "Playback devices". A window will appear in which you should select "Speakers". Next you need to click on “Properties”.

Now another window has opened. In it you need to go to the “Improvements” tab. There, check the box next to the "Loudness" line. To save the settings after closing the window, click “OK”. Now you know how, without a special program to increase sound, you can increase the playback volume on your computer.

Upscaling using codecs

It’s worth mentioning right away that this method will only be useful to those users who installed the K-lite codec pack codecs.

To increase the volume of playing files, you need to initially launch them using K-lite kodec. Once you do this, icons will be added to the system tray. At the moment, only one is needed - the one that is blue. He is the one responsible for playing the audio track.

So, double-click on it so that the settings window appears. In it, go to the Volume tab and immediately check the boxes next to Volum, Normalize, Regain volume and Show current volume levels. We also move the Master volume slider to 300%.

Here's another way to increase the decibels on your computer without a third-party program to increase sound.

Magnification using the program

Now let's talk about which one on a laptop will allow you to fully enjoy playing video or audio. This article will use SoundBooster as an example, but there are a huge number of similar programs on the Internet. By the way, this method can be used together with the first one, in this case the sound will become even louder.

So, you need to download this program first. The easiest way is to type its name into any search engine and download from the first source.

So that you do not waste time, we list the software system requirements:

• CPU (processor) - 1.0 GHz;
• memory (RAM) - 256 MB;
• free disk space - 10 MB;
• OS - Windows above XP.

As you can see, the system requirements are minimal, so this software will work on almost any laptop. It is also worth making a small note: do not increase the volume of the speakers too much, this may lead to their damage or deterioration in playback quality.

Zooming in with players

Finally, we will talk about the VLC player. This program is perfect for you. You can download it both on the official website and on any other resource, since it is publicly available. In turn, the program can increase the sound by as much as 10 times. The bottom line is that this player has its own codecs installed, which do not depend on the system ones. The only downside is that the volume will only increase when playing a file in this player.

Greetings to all!

I think I’m not lying if I say that most users face a similar problem! Moreover, sometimes solving it is far from so simple: you have to install several versions of drivers, check the speakers (headphones) for functionality, and make the appropriate settings for Windows 7, 8, 10.

In this article, I will focus on the most popular reasons why the sound on a computer may be quiet.

Poor contact connectors, not working headphones/speakers

Quite a common reason. This usually happens with “old” PC (laptop) sound cards, when various sound devices have already been inserted/removed into their connectors hundreds of times. Because of this, the contact becomes poor and as a result you observe a quiet sound...

I had exactly the same problem on my home computer: the contact would come off - the sound would become very quiet, I had to get up, go to the system unit and straighten the wire coming from the speakers. I solved the problem quickly, but “clumsily” - I simply taped the wire from the speakers to the computer desk with tape so that it would not dangle or come off.

By the way, many headphones have an additional volume control - pay attention to it too! In any case, if you have a similar problem, first of all, I recommend starting by checking the inputs and outputs, wires, and the functionality of the headphones and speakers (to do this, you can connect them to another PC/laptop and check their volume there).

Are the drivers normal, do they need an update? Are there any conflicts or errors?

About half of software problems with a computer are related to drivers:

Errors from driver developers (usually they are fixed in newer versions, which is why it is important to check for updates);

Incorrect driver versions selected for this Windows OS;

Driver conflicts (most often this happens with various multimedia devices. For example, I had one TV tuner that did not want to “transmit” sound to the built-in sound card, it was impossible to do without cunning tricks in the form of third-party drivers).

Driver Update:

2) It’s also a good option to use special. utilities for updating drivers.

one of the special utilities: SlimDrivers - you need to update your audio drivers.

3) You can check the driver and download the update in Windows 7, 8 itself. To do this, go to the “Control Panel” of the OS, then go to the “System and Security” section, and then open the “Device Manager” tab.

In Device Manager, open the "Sound, video, and game devices" list. Then you need to right-click on the sound card driver and select “Update drivers...” in the context menu.

Please note that in the device manager there are no exclamation marks (neither yellow, nor especially red) next to your audio drivers. The presence of these signs, as in the screenshot below, indicates conflicts and driver errors. Although, most often, with such problems there should be no sound at all!

Problem with Realtek AC'97 audio drivers.

How to increase volume in Windows 7, 8

If there are no hardware problems with the headphones, speakers and PC, the drivers are updated and in order - then 99% of the quiet sound on the computer is associated with the Windows OS settings (or with the settings of the same drivers). Let's try to adjust both, thereby increasing the volume.

2) The second step is to check the sound volume by clicking on the icon in the tray (next to the clock). If necessary, move the slider up, thereby increasing the volume to maximum!

The volume in Windows is about 90%!

3) To fine-tune the volume, go to the Windows Control Panel, then go to the “Hardware and Sound” section. In this section we will be interested in two tabs: “volume settings” and “audio device management”.

Windows 7 - hardware and sound.

4) In the “volume settings” tab, you can adjust the playback sound volume in all applications. For now, I recommend just raising all the sliders to maximum.

5) But in the “Manage sound devices” tab everything is more interesting!

Here you need to select the device through which your computer or laptop plays sound. As a rule, these are speakers or headphones (there will probably be a volume slider running next to them if you have something playing at the moment).

So, you need to go to the properties of the playback device (in my case, these are speakers).

Playback device properties.

Levels: here you need to move the sliders to maximum (levels is the volume level of the microphone and speakers);

Special: uncheck the box next to “Limited output” (you may not have this tab);

Improvement: here you need to check the box next to the “Loud Compensation” item, and uncheck the other settings, see the screenshot below (this is in Windows 7, in Windows 8 “Properties->advanced features->volume equalization” (check the box)).

Windows 7: Volume setting to maximum.

If all else fails, there is still a quiet sound...

If you have tried all the recommendations above, and the sound still does not become louder, I recommend doing this: check the driver settings (if everything is OK, then use a special program to increase the volume). By the way, special The program is also convenient to use when the sound is quiet when watching a particular movie, but in other cases there are no problems with it.

1) Checking and setting up the driver (using Realtek as an example)

It’s just that Realtek is the most popular, and it’s installed on my PC, which I’m currently working on.

In general, the Realtek icon is usually displayed in the tray, next to the clock. If you don’t have it, like me, you need to go to the Windows control panel.

Realtek HD Manager.

2) Use of special programs to increase volume

There are programs that can increase the playback volume of a particular file (and indeed the sounds of the system as a whole). I think many people have encountered the fact that they come across “crooked” video files that have very quiet sound.

Alternatively, you can open them with another player and turn up the volume; or use Sound Booster (for example).

Sound Booster

What the program can do:

Increase volume: Sound Booster easily boosts audio volume up to 500% in programs such as web browsers, communication programs (Skype, MSN, Live and others), as well as in any video or audio player;

Easy and convenient volume control (including using hot keys);

Autorun (you can configure it so that when Windows starts, Sound Booster also starts, which means you won’t have problems with sound);

There is no sound distortion, as in many other programs of this kind (Sound Booster uses excellent filters that help preserve almost the original sound).

In this post, we’ll look at how to make the sound on a computer or laptop louder if everything is at maximum. Sometimes the audio level in a file is low and the volume may not be sufficient for comfortable listening. The volume may be low only on headphones or only when played through speakers. However, if there is a need to raise the volume to a comfortable level, how can this be done? In all of the above cases, it is assumed that the audio equipment of the PC or laptop is in full working order.

First What you need to do to increase the volume on a laptop is to check the volume level through the tray icon. Through this icon you can open additional items in the “audio” section if you click on the speaker picture at the top and check all the settings, especially in the “levels” item.

Second. Through the control panel, find the “sound” section, there we find the properties of our playback device. In the “additional features” section, in the “Volume equalization” item, check the box and check the volume level on the desired file.

Third. Connect external speakers with a built-in amplifier (computer).

Fourth. Install audio codecs from the K-Lite-Codec package; you can easily download such a package from the developer’s website and simply run the exe file. Media Player Classic will also be installed along with the codecs. Launch the file with quiet sound on Media Player Classic and see the section Play > Filter > ffdshow audio decoder. And here we find the item (on the left) Volume and you need to click on it with the left mouse button. Then a window with a volume control will open, adjust the volume as you need.

How to adjust the sound in a laptop using a player. In Media Player Classic, you can right-click on areas of the video being played and select audio. There will be an options item, and move the “boost” control to the desired level.

Fifth. You can try opening the mixer in the volume settings from the tray. There, select speakers > enhancements > equalizer and when the equalizer opens, move the sliders up and save this position as a setting. But sometimes in the equalizer menu it is not possible to adjust frequencies and you can only select preset settings.

Sixth. As in point five, go to the enhancement settings and check the boxes for equalizer, virtual sound and loudness. This may increase the sound.

Seventh. As in point five, go to improve the sound of the speakers and check only the loudness check box (the rest are empty), and at the top we mark “turn off all sound effects.” Then click “apply” and “ok”.

Ninth. We use a program to increase the volume on a laptop. Install Letasoft Sound Booster, which will increase the volume 5 times on any applications, including players. Unlike VLC and Media Player Classic, which control the volume of only the files played on them.

Please remember that too much volume may damage the built-in speakers. First, interference will appear in the form of rattling, and then the built-in speakers will stop working completely.

I also want to note that the sound may be quieter due to audio. On my motherboard Asus P5Q SE/R, if there is no wood for sound, including the equalizer adjustment panel, then the sound is much louder. If I use firewood, the sound is quieter and I have to turn the sliders to the maximum.