Programs for autocom cdp. Installation by. Advantages and disadvantages

(if there are problems with archives, use WinRar version 5)

Attention!!! Before calling for advice on installing programs, watch very carefully the attached videos on installing and configuring programs !

************************************************************************************************

Programs for scanners that are installed directly on your WINDOWS:

— Opus (analogue of Autocom for trucks) 2.15.0 and MotorscanTruckPro 2.15.0 (for trucks) (installation instructions inside the archive)

— Instructions on how to install WOW 5.0.8 on your computer —

• Factory firmware (it is recommended not to flash the device, but to copy and replace this folder to your Autocom/cars/Firmware folder and replace the files)

If there are problems with device drivers, you can

An example of how to connect a scanner via Bluetooth in a virtual machine -

An example of how the scanner works via Bluetooth with a tablet (can be ordered by phone)

******************************************************************************************************

Delphi(Autocom) 2014.3

We suggest that instead of installing all programs sequentially through installation on your computer, install all programs at once through Virtual machine. This installation method is faster, simpler and more stable in operation. In this case, you will immediately have the following programs installed: Delphi(Autocom)2014.3 Сars +Delphi(Autocom)2014.3 Truck+ WOW! 4.15.3 + WOW! 5.00.8

Version: 14.3
System requirements: - Windows, Linux, MacOS
— Intel or AMD from 1.5 GHz and higher
— 1 GB RAM
— 15+ GB of free disk space
- USB port
Interface language: Russian
Tablet: Cured

Download and install one of these programs: VMware 12pro(64bit) or VMware 10 lite(32/64bit) image.

Upload the virtual machine image:

- Delphi 2014.3 Cars
- Delphi 2014.3 Heavy Duty
—Wurth WOW! 4.15.3
—Wurth WOW! 5.00.8

You need to download the torrent file with these programs.

Delphi 2014.3 Cars

Delphi 2014.3 Heavy Duty
Activated to serial number 100251. All additional licenses have been entered.

Wurth WOW! 4.15.3

Wurth WOW! 5.00.8
Activated. All additional licenses and all GOLD keys have been entered.

All these programs work with Chinese clones of the Autocom CDP+ and Delphi DS-150E adapter (sn. 100251). Wurth WOW! It can also work with Autocom CDP PRO, there is no connection to the serial number.
*******************************************************************************

Software versions for downloading for the VAS5054A scanner.

Autocom CDP+ CARS + TRUCKS Generic 4 in 1

The products offered are not equipment

AUTOCOM Diagnostic Partner AB and Delphi Technologies, Inc.

VD TCS CDP - New VCI+

is a platform device with a scanner Autocom CDP+

and has improved technical characteristics by an order of magnitude,

which provides faster performance and increased reliability

Version 2014.3

includes VAZ, GAZ, KAMAZ and UAZ

New versions

Autocom, Delphi, Opus, Motorscan, WOW

Add-ons & Utilities, Drivers, Firmware and chip dumps

Factory production

3989 rub.Free shipping!

There are 2 copies available.

Adapters forpassenger cars By 500 rub.:

Audi, VW 2 pin+2 pin

BENZ-38 pin

BMW-20 pin

Are available

TOset of cargo adapters:

7 pin Knorr, Wabco Trailer
12 pin MAN
37 pin MAN
IVECO-30 pin
SCANIA\DAF -16 pin
BENZ-14 pin
Renault-12 pin
VOLVO-8 pin

Not available

Diagnostic interface Autocom CDP+ together with PC or PDA and powerful diagnostic softwareNew VCI+ and Autocom is a powerful and flexible tool for all car repair shops, fleet owners, vehicle testing, traffic services, police and military forces. Article with description below.

Software supplied:

New VCI+ Cars
Heavy Duty Vehicles (New VCI+) Trucks

The WOW complex works with these adapters

Description of the software.

(as an article)

Due to the fact that the necessary description of the software was not found on the Internet, I provide a description of an analogue.

Autocom CDP+ ( New VCI+ ) for cars and trucks - universal 4 in 1

Autocom CDP+ Cars
Autocom CDP+ Trucks
New VCI+ Cars

Heavy Duty Vehicles (New VCI+) Trucks

Autocom CDP+ ( New VCI+ )

It is a fast and reliable diagnostic interface that links the vehicle and computer. It works with old and new vehicles.
Allows you to diagnose cars and light vans from 1988 onwards. A total of 47 different brands. The software package provides diagnostics for light and heavy commercial vehicles, buses and trailers from model year 1995 onwards. A total of 37 different brands. The GENERIC diagnostic program is designed for vehicle emissions-compliant diagnostics. GENERIC is included in the program packages for cars and trucks.

Autocom CDP+ ( New VCI+ ) Cars & Trucks & Generic

This is a new professional diagnostic tool at a low price! The professional multi-brand scanner provides excellent coverage of cars and trucks of European car brands and demonstrates good results when working with Japanese and American cars. The undoubted advantage of the Autocom CDP scanner is its excellent localization and user-friendly interface. Connecting the system is extremely simple, which means that the diagnostician does not need to have deep knowledge in computer technology, but simply, using the Autocom system, find the cause of a malfunction in the car’s electronics, accurately determine the cause and determine the location of the breakdown (faulty unit, etc.). In addition to a cable connection to a computer via a USB interface, the Autocom CDP Pro scanner also supports a wireless Bluetooth connection. Autocom's price makes it a worthy budget alternative to the multi-brand Launch x-431 Master scanner. The scanner software can also be installed on a PDA running Windows Mobile. The Autocom scanner running the current software version supports the following car brands: Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Honda, Hyundai, KIA, Lancia, Landrover, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Renault, Saab, Seat, Skoda, Suzuki, Toyota, Volkswagen, Volvo, etc. since 1988 - a total of 47 different brands. The software package provides diagnostics for light and heavy commercial vehicles, buses and trailers from model year 1995 onwards. A total of 37 different brands.

The GENERIC diagnostic program is designed for vehicle emissions-compliant diagnostics. GENERIC is included in software packages for cars and trucks. 47 different brands, as well as 37 brands of trucks
Multiplexer function, 2xHS CAN(ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog input and 5 volt output).

"BLACK BOX"

With the trip recording feature, you can record parameters in real time while you are driving the car. While recording, you can press a button to highlight specific errors so that later errors can be examined. The CDP+ is equipped with built-in memory, thereby eliminating the need to take your computer with you.

MULTICOLOR INDICATOR

With the multi-color CDP+ indicator, you can fully monitor the diagnostic process. Different colors and sounds help you observe the process from a distance. For example, when the indicator color alternates between blue and green, the CDP+ is linked to the vehicle's control unit.

ADAPTER WITH LED LIGHTING

To make it easy to find the diagnostic connector in your car, even if it is located in dark and inaccessible places, there is an LED on the 16-pin connector.

CHECKING VOLTAGE

When the CDP+ is connected to a vehicle, the vehicle's battery voltage will be automatically checked and the device will automatically adjust to the desired vehicle voltage level: 12 or 24 volts. If the voltage becomes too high or too low, the CDP+ will warn with sound and light and also with a diagnostic software battery icon.

CHASSIS NUMBER -VIN

The car software has a smart function that allows you to read the chassis number of the car being diagnosed. This guarantees automatic selection of model and year of manufacture. In addition, the engine code of vehicles that are usually available in the market is also automatically selected.

ISS

The Intelligent System Scan (ISS) looks at all of the vehicle's systems and displays the error codes that are stored in each system. This saves time and allows you to get a quick overview of the actual condition of the entire vehicle. When ISS is completed, a specific control system element can be selected for further analysis of the results.

ISI

The Intelligent System Identification (ISI) allows you to identify and automatically select the type of controller installed in your vehicle. This ensures that diagnostic sessions are carried out correctly with the correct and required parameters.

REPORT FUNCTION

Based on the layout of this function, you can see the changes and adjustments necessary for a particular vehicle, without having it nearby. Help text enables planning and efficiency even in complex situations.

OBD FUNCTIONS

CDP+ is created using a unique multiplexer technology that allows its use on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, a full range of certified and customized adapters and cables are available.

HELP FUNCTION

For most OBD functions, such as adjustments and programming, there are detailed instructions and help texts to assist with diagnosis. Step-by-step information on the prerequisites, preparation and implementation of various functions greatly simplifies the performance of even the most complex functions.

Peculiarities Autocom CDP+ ( New VCI+ ) :

User-friendly and intuitive software for cars, light and heavy trucks and buses
Fast and secure vehicle and system identification with Autocom ISI (Intelligent Identification System)
Intelligent Scanning System (ISS) - automatically scans all vehicle control units
Bluetooth and USB connections are standard
Software on CD/DVD or SD cards for Pocket PCs
Fast and easy installation
Handles all current communication diagnostic standards for vehicles
reference Information
Reading and erasing fault codes
Read data in real time
Restoring service messages
Possibility of programming for injectors, keys, remote controls, etc.
Unique multiplex technology that minimizes the need for special cabling

Functionality and diagnosable blocks Autocom CDP+ ( New VCI+ ) :
Serial diagnostics
Scanning
Communication via EOBD/OBDII/OBDI
Engine
Ignition
Climate control
ABS
Resetting service functions
SRS
Immobilizer
Dashboard
Comfort systems
Gearbox, etc.

WITH Autocom CDP+ ( New VCI+ ) you can do the following:

Diagnostics of passenger cars
- Truck diagnostics
- Diagnostics using OBDII/EOBD protocols
- Read identification data
- Auto scan of all systems
- Connection to any electronic unit
- Diagnostics according to manufacturer’s protocols
- Reading fault codes
- Erasing fault codes
- Decoding error codes
- View data in real time
- Control of actuators
- Adaptation of electronic units
- Coding of electronic units
- Function programming
- Tests of actuators
- Reset service intervals
- Correction of service intervals

Autocom CDP+ (New VCI+ ) supports:

Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Honda, Hyundai, KIA, Lancia, Landrover, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Opel, Peugeot, Renault, Saab, Seat, Skoda, Suzuki , Toyota, Volkswagen, Volvo, etc.

and Yuchai

Autocom CDP+ (New VCI+ ) works with trucks:

3 in 1 with advanced electronic board and latest software.The circuitry is based on original Samsung, Bosch, NEC chips.

Autocom CDP+ new version of the popular multi-brand scanner
now in one device there is support for passenger cars and trucks (commercial) transport + improved electronic board circuitry, makes it possible to carry out stable and professional diagnostics of a huge number of cars, and convenient illumination of the OBD connector allows you to easily find the vehicle’s diagnostic connector in hard-to-reach and dimly lit places.

A version is also currently available Delphi ds150e new vci.

Autocom CDP plus carries out computer diagnostics of old and new cars of most brands and models present on our market.

Outacom CDP plus (3 in 1) allows for diagnostics:
1) passenger cars and light vans from 1988 onwards. A total of over 58 different brands,
2) light and heavy commercial vehicles, buses, trucks and trailers, starting from 1995. A total of over 44 different brands.
3) diagnostics using common OBD-II protocols. The GENERIC program is designed for diagnostics taking into account the legislation for harmful vehicle emissions. GENERIC includes a package of programs for cars and trucks.

Autocom scanner functionality: 2xHS CAN(ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog input and 5 volt output).

BLACK BOX Flight Recorder Function
With this function, you can record parameters in real time, while you are driving the car, system operating parameters will be recorded on the memory card. Autocom CDP+ equipped with a built-in slot for a Flash card, thereby eliminating the need to take a computer with you.

Multi-color and sound indicator
With color indicator Autocom CDP+ You can fully control the diagnostic process. Different colors and sounds help you observe the process from a distance. For example, when the indicator color alternates between blue and green, the device Autocom CDP plus communicates with the vehicle control unit.

Diagnostic connector with LED backlight
To make it easy to find the diagnostic connector in your car, even if it is located in dark and inaccessible places, there is a flashlight on the 16-pin connector. The location and design allows the light to shine even when using an adapter cable for vehicles without a 16-pin diagnostic connector.

Voltage check
When Autocom CDP connected to the car, the vehicle battery voltage is automatically checked and the device itself will adjust to the desired car voltage level: 12 or 24 volts. If the voltage becomes too high or too low, then Autocom CDP 3 in 1 will alert you with a sound, light and diagnostic software battery icon.

Chassis number - VIN
The car software has a smart function that allows you to read the chassis number of the car being diagnosed. This guarantees automatic selection of model and year of manufacture.

ISS- The Intelligent System Scan (ISS) looks at all of the vehicle's systems and displays the error codes that are stored in each system. This saves time and allows you to get a quick overview of the actual condition of the entire vehicle. When ISS is completed, a specific control system element can be selected for further analysis of the results.

ISI- The Intelligent System Identification (ISI) allows you to identify and automatically select the type of controller installed in your vehicle. This ensures that diagnostic sessions are carried out correctly with the correct and required parameters.

Report function
Using this function, you can see the changes and adjustments needed for a specific vehicle without having it nearby. Help text enables planning and efficiency even in complex situations.

Compatibility
Autocom Cars+Trucks created using a unique multiplexer technology, which allows its use on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, a full range of adapters and cables are available.

Versatility and auxiliary functions
For most functions, such as adjustments and programming, there are built-in detailed instructions and supporting texts. Step-by-step information and tips make performing even the most complex functions much easier.

Main features and advantages of Autocom 3 in 1:
- Black and gray all-metal interface housing
- Compatibility with programs: Autocom, Delphi, Opus, etc.
(2013.3, 2014, 2014.2, 2014.3, 2015, 2015.1, 2016)
- Improved electronic board
- Supports 12 and 24 volts
- Trucks and cars in one device
- OBD cable with LED flashlight
- USB cable

Additional set of adapters for passenger cars up to 2000:
PSA 30 pin cable - 1 pc.
PSA 2 pin cable - 1 pc.
Audi, VW 2 pin+2 pin cable - 1 pc.
MERCEDES BENZ 38 pin cable - 1 pc.
BMW 20 pin cable - 1 pc.
OPEL 10 pin cable - 1 pc.
FIAT 3 pin cable - 1 pc.
Power cable - 1 pc.

Additional set of adapters for trucks up to 2006-2008:
7 pin Knorr, Wabco Trailer cable - 1 pc.
12 pin MAN cable - 1 pc.
38 pin IVECO cable - 1 pc.
IVECO 30 pin cable - 1 pc.
SCANIA\DAF 16 pin cable - 1 pc.
BENZ 14 pin cable - 1 pc.
Renault 12pin cable - 1 pc.
VOLVO 8pin cable - 1 pc.

Attention! A new version of the site http://iDiag.by/ is available
We are not responsible for the incorrect and/or illegal use of equipment purchased from us, as well as for any damage to the vehicle. The user must notify any potential buyer of the vehicle about changed odometer readings and/or other changes made to the vehicle.

© 2017 www.site
Car diagnostics and equipment (car diagnostic scanners, adapters, diagnostic cables, programmers, flashers, adapters) for car diagnostics can be purchased from us. We sell equipment for computer diagnostics of cars in Minsk and throughout Belarus. With our equipment, car diagnostics are fast, simple and high-quality. Car diagnostics is primarily engine diagnostics, chassis diagnostics and electronic systems diagnostics. Our product catalog consists of the following devices - automotive diagnostic equipment: diagnostic scanners (universal scanners, dealer scanners), motor testers (engine diagnostics), equipment for computer diagnostics (including programs for car diagnostics); additional equipment for diagnostics: OBD adapters, odometer adjustment, chip tuning.

Autocom CDP is a program that performs diagnostics of cars of different brands. In the program you check the technical condition of cars and troubleshoot problems. Autocom CDP is designed to work with an adapter that works using the OBD-II protocol.

The software allows you to receive information using a special adapter that reads error codes of the car's electronic unit. Using this tool, you will perform tests on different vehicle systems. The graphical shell of the program is designed for an entry-level user.

Functional

The main functions of the program are reading fault codes and deleting them, viewing information about transport, which is displayed in real time, and also performing various tests.

Quick launch of the software requires connecting to the car and entering the VIN. If it is not there, enter the technical parameters to test the car. Autocom CDP is a universal program that provides data reading from the ECU of cars from different manufacturers.

Features of work

Autocom CDP is available for a fee. You will not be able to use the trial period of the software, which means you will have to buy a license. In addition, the creators of this “tool” provide a 1-year subscription, that is, for a 12-month license you need to pay a lot of money.

The license for this program is available in different versions. You can subscribe to the regular version of the software or buy software with advanced functions. Don't forget that the adapter itself costs a lot of money.

Requirements

To run Autocom CDP, you will need a computer with 2 GB of free hard disk space, as well as the .NET Framework 3.5.

On computers running OS Windows XP, the program runs only on the latest Service Pack. Synchronization of this software and full operation with the vehicle’s electronic control units is ensured via a USB cable or Bluetooth.

Key Features

• quick check of the technical condition of vehicles of different categories;
• identification of transport models via VIN code;
• the software does not have a test period for working in the shell;
• the program reads and deletes trouble codes;
• the utility does not require a lot of space on the computer’s hard drive and powerful hardware;
• scanning occurs through an adapter that is connected via a USB cable or Bluetooth network;
• All databases with information about errors are updated in real time.

Autocom cdp and Delphi ds150e are multi-brand scanners for computer diagnostics of cars. Currently, there are many programs and versions for the above auto scanners. To date, the most stable and efficient version is 2014.3

To install and configure the program for Autocom cdp and Delphi ds150e, you will need some knowledge of the computer and the Windows shell.

First, you will need to download and unzip the folder containing the files required for installation. Download the Delphi autocom program.

Let's start the installation!

1. Find the file SSCERuntime_x86-ENU.msi and install it.

2. Installation of NetFramework 3.5 (dotnetfx35.exe) or later is required. Often this program is already installed on your computer. If not, then you can easily download it from the Internet and install it. Installation is very simple.

3. In the installation folder we find the file GImageX_Ru.exe, which we find following the path GimageX_XP-7-810_(x32x64)\GimageX_XP_7_8_10_x32x64_Ru and run this file.

4. Go to the “APPLICATION” tab.

5. In the “SOURCE” line, select the file Final_archive_2.14.3.3_(xcjps)(60x1).wim, located in the installation folder.

6. In the “RECIPIENT” line, select the C:\ drive (if you select a different path, we DO NOT GUARANTEE performance).

7. In the “IMAGE” line, select the version of the software to be installed. You can leave number 1 or manually select from the list.

To install Delphi, select 1 (passenger cars) or 2 (trucks)

To install Autocom, select 46 (passenger cars) or 47 (trucks)

8. Click the “APPLY” button and wait for the installation to complete. To confirm the completion of the process, the message “WIM successfully applied to...” will appear. Click the “Abort” button.

9. Close the GImageX_Ru program.

10. The program is installed. Now we need to go through activation. Go to the installation folder C:\Delphi 2.14.3 100251\Delphi Cars 2.14.3.3 100251\Activator2014R3.3 (depending on your choice in step 7, Autocom may be used instead of Delphi) and run the activator Keygen_2014R3.exe.

11. In C:\Delphi 2.14.3 100251 there will be two shortcuts. Let's look at Delphi cars as an example.

The Main-Delphi Cars 2.14.3.3 100251 shortcut is required for activation.

RunAsDate-Delphi Cars 2.14.3.3 100251 shortcut to a program with date rollback, it is recommended to use it for work, since more program functions are performed with date rollback.

12. Launch Main-Delphi Cars 2.14.3.3 100251 (shortcut without date rollback). In the first window that opens, click the next arrow, then next again, then next again. The START button appears, press START, a window appears with two buttons (YES and NO), press YES, the program offers to save the file, save it anywhere (Desktop).

13. We return to the activator, which was previously launched (in step 10). Click the Activate FileActivation.xml button and open the file saved in step 12.

14. Go to the program, the START button is still on the screen, press start and select NO, open the previously saved file. The program starts running.

15. The program has started, but it is in English, you need to switch to Russian. Go to the “settings” tab, then “language” and select Russian. The Program is restarted.

16. Next, you need to install the driver for the device. To do this, connect the device via a USB cable and manually install the driver for the unknown device through the device manager. The driver is located at C:\Delphi 2.14.3 100251\Delphi Cars 2.14.3.3 100251\Driver.

17. After installing the driver, in the program settings you need to select the COM port on which the device is installed. After launching RunAsDate-Delphi Cars 2.14.3.3 100251 Go to the “settings” tab, then “hardware installations” and select the desired COM PORT. Next we take the test.

Attention! When connecting the adapter to the program for the first time, you need to update its firmware. Firmware updates can only be done via a USB cable. Bluetooth adapters must be firmware via USB.

If you need to install additional software, for example, you installed cars and need trucks, then repeat steps 7 and 8.