Setting up Yandex mail on iPhone. How to fix email problems on iPhone and iPad Failure to send mailbox full

A large number of iPhone users often check their email and communicate with their colleagues and relatives. It is very convenient to transfer various documentation and so on. But what to do when your iPhone won't send email and there's nothing you can do about it?

There are several solutions to this problem

• A similar problem is most often solved in this way. It occurs due to the fact that the user data was not re-entered. You should go to “Settings” -> “Mail, addresses, calendars”. There we select an account and go to “Account”, then click on “SMPT” -> “Primary Server”. Enter your password and email address again. After these steps, we try to send someone a message by mail again.
• It happens that this does not work and the phone simply refuses to do it. You need to try restarting it.
• Next, you can reset your network settings. Sometimes a software error can occur and it affects mail, especially on some iPhone models.
• If even after this the iPhone does not send mail.ru, gmail, yandex, then try restoring it from a backup copy or updating your iPhone altogether. This will make all settings the same as they were at the time of purchase.

This may not always help the solution, because the problem may be hidden in a completely different place than where it will be looked for. That is why it is better to bring your iPhone to our service center, where specialists will perform a free diagnosis of the device.

St. Petersburg | Ekaterinburg

It's very easy and convenient to read and send emails through the built-in application on your iPhone. This way you can always see the important letters that have come to you and easily write a response to them. But this method still has a disadvantage: you cannot send photos from it. To use the built-in mail, you do not need to install any applications on your smartphone, but you will have to tinker a little with the settings for normal operation.

Yandex.ru is considered one of the popular email services among Internet users, so in this article I will try to describe this process in detail. For other email clients the principle is no different.

Setup instructions:

1. Let's go to " Settings" and find there the item " Mail, addresses, calendars».

3. In the next menu, click on the item “ Other" Alas, Apple does not favor Yandex.

4. Select " New account».

5. In the window that opens, you will need to fill in all the fields.

Name– your name, which people will see in messages from you.

Email– your mailing address, which was created for you on yandex.ru.

Password– Your real password for the mailbox.

Description– a brief description of our account, enter yandex or yandex.ru

After all fields are filled in, click “Next”. Our mail setup will begin.

6. In the window that opens, click on “ Save».

7. In most cases, automatic settings are enough for mail to work correctly. Close “Settings” and go to our standard application “ Mail" All our letters should be loaded there immediately and for a more reliable check we send a test letter for reliability. If everything works, then the mail setup was successful.

If mail does not work, then you will need to delve a little further into the settings:

More precisely:

1. Let's go again to " Settings» — « Mail, addresses, calendars"—the mail we created.

2. In it, select SMTP, which is located in the “ Outgoing mail server».

3. If you already have a configured yandex.ru mailbox, then you just need to click on smtp.yandex.com which is located in the “Primary server” section (if you do not have mailboxes, then select “Not configured”, and in the “Node name” field write smtp.yandex.com. Next, save and click on smtp.yandex.com ).

4. We check that we have activated the “ Use SSL "and the server port is registered 465 . As you can see in the picture, my mail works well with the port 587 .

5. Click on " Ready»-« Back" and go to the tab " Additionally».

6. Make sure you have in the " Inbox settings"item activated" Use SSL "and the server port is registered 993 .

Now our mail is completely ready and ready to go.

I hope you found this article useful.

: "Wrong password entered" when logging into email account

- “I keep getting a notification with “Invalid password entered”, what should I do?

To fix problems with iPhone email accounts, you need to check if you have entered the email account and password correctly. Moreover, some iPhone users complain that they are rejected by the server without knowing why. Well, it must be a wrong email password error.

When you receive the "Invalid Password" notification, you can delete and set up your email account again. To get started, you'd better contact your email provider or system administrator to get the correct email address and password. Then find the Settings app and tap Mail, Contacts, Calendar. Select the email account with iPhone email password errors. Tap "Remove Account" and then select "Remove from My iPhone" to remove that email account. After that, you can follow the steps above to add the email account again.

- “My emails stopped syncing with my iPhone iOS email, I don't know how to fix iPhone email won't update on iPhone 6.”

This is one of the most common email problems where iPhone mail is not updated automatically. Poor Wi-Fi network or incorrect email settings should also factor in iPhone email sync issues.

So check your email and password first. After entering the correct email account, you should check your Wi-Fi network by opening a new page to see how long it costs. If necessary, change to another strong wireless cellular network. Later, you can fix the error of email not syncing successfully on iPhone.

These are secure solutions that you can choose when your iPhone email is not working or you have other iPhone email problems. You can then activate your email account to send or receive emails as usual.

One of the directions of our site is instructions for solving various problems on iPhone/iPad/MacBook. This time We did not move away from this idea.

Lately, people have often started contacting us regarding the problem of sending a letter from @mail.ru. Such problems can also be observed on other mail servers, but since they mainly use mail.ru services in Asia, we decided to write instructions for improving the performance of mail on iPhone 4/4s/5/5s

If your iPhone is not sending a letter and the error “could not send the letter” and “incorrect outgoing SMTP server” is displayed, then these instructions should help you and solve your problem

Instructions:

1. Delete the mail setting: Settings ->

2. Mail, addresses, calendars - >

3. Select: mail account

4. Click: Delete account

Now we set up mail manually

1. Turn on airplane mode

2. Go to: Mail, addresses, calendars

3. Click on: Add account

4. Choose: Other

6. Fill in the fields:

8. On the new window, select POP (this is the most important thing) and fill in

INCOMING MAIL SERVER

Node name: pop.mail.ru (if you have @inbox.ru or @list.ru then write yours instead of mail.ru)

Username: alfakron (write only before @)

Password: (Your password)

OUTGOING MAIL SERVER

Node name: smtp.mail.ru (also if you have list.ru or inbox.ru, then write your own instead of mail.ru)

User name: (empty)

Password: (blank)

9. Click save, a window will pop up, click continue and click save again, save again

10. Turn off airplane mode and check your email

Setting up e-mail on an iPhone, like any other function on a device of this type, has its own characteristics. But this does not mean that setting up mail on an iPhone is difficult. Not at all, you just need to know some of the features of adding a specific mailer.

Before you install your email, you need to prepare and check if you have an Internet connection, as well as the ability to create a mailbox with a specific name. But it is not necessary to do all this, because... everything will become clear as you work.

How to set up mail from mail.ru and other well-known mailers - read in our article today.

In the usual way, it is easy to set up mail on resources such as iCloud, Yahoo, Outlook.com or Gmail. Even an inexperienced user can do this, because... procedures are intuitive. This is due to the fact that the standard Mail.app protocol has been introduced into the iPhone’s operating system. automatically adding settings for servers of different mail services. Therefore, here the user will only need to enter his data into the account and save the name of the box in the device’s memory.

Using all mail functions through a standard program is convenient and easy. It's as easy as writing an SMS message. About important events for the user - the receipt of new letters - he will be notified by a sound signal. However, there are also disadvantages. For example, it is not yet possible to send a photo through the application.

But let’s end with a lyrical digression and move on to the main thing, namely, how to set up a mailbox on an Apple smartphone. This is, without a doubt, the most popular mailer among users, so we will consider in detail the nuances of working with it. Although, in principle, the setup of other servers is almost the same. But still, there are some subtleties there, and they will also be mentioned.

So, to configure the above-mentioned mailer on an Apple gadget, you need to perform the following steps:

1. Open settings and select the “Mail...” section.
2. Click on the option to add a new “account”.
3. Select the “Other” section. Mail.ru mailer is not on the list of reputable programs for Apple.
4. Filling out all the fields in the pop-up window: user name, mailbox name, account characteristics.
5. Click on the continue button, after which the setup process will start automatically.
6. Save data in a new window that pops up.

If everything went well, after the 6th step the settings should be completed automatically. To check this, you need to go to the mail application, having first closed other settings. The mailbox configured this way should now work perfectly. Letters should be sent without problems, and those received in the user’s mailbox should be opened quickly. To check the functionality of the mailbox, it’s a good idea to try sending an e-mail to a friend or acquaintance. If the letter arrives, it means the procedure was successful. If not, you will have to resort to more serious tuning of your mail settings.

Ways to solve problems setting up Mail on iPhone

If nothing worked with setting up mail on your Apple gadget, follow these steps, which should help 100%:

• Go to your device's mail settings.
• Next, go to the settings of the newly created mailbox.
• In the Outgoing Email Servers section, click on SMTP.
• If your mailbox already has your mailboxes configured, click on smtp.mail.ru in the primary server section. If there are none, select “not configured”, and in the node name section you should indicate smtp.mail.ru, then save the action and click on smtp.mail.ru again.
• See if the “Use SSL” switch is activated, as well as whether the server port information is correct (it should be written 465). But it happens that everything works fine with port 587.
• Click the Done and Back buttons one after the other, and then click on the Advanced options tab.
• Recheck your inbox settings, incl. switch position. But the server port should be 993.

After you have done everything described above, the mail will work. In addition, you can configure other mailers in the same way. And all of them will be in a single standard program. It is important that the process of switching between boxes from different companies is very easy and convenient.

How to set up Russian-language email clients on iPhone

With boxes from other companies, the situation is a little more complicated, but nothing is impossible here either. We are talking about such mailers as Rambler or Yandex, popular in Russia. To set up their mailboxes on an iPhone, the user will need to manually enter data. But at the same time, each of the mailers has its own characteristics, so we will analyze the process of setting up the mailboxes of the most famous companies in more detail.

So, to set up e-mail from Yandex on an Apple gadget, you need to repeat several steps similar to those described above - which the user performed when working with Mail.ru. But now at the bottom of the “account” you need to select the “Other” item.

Next you need to enter your email name, password and description. The mail settings manager built into the mobile device will give the user a recommendation to create an e-mail in the standard IMAP protocol. However, when trying to fill it out, the user almost always encounters an error. In such a situation, you need to exit the window of this protocol. which will start loading automatically, and go to POP. Almost all remaining data will be linked automatically.

• Change the names of nodes for incoming email servers - to pop.yandex.ru.
• For outgoing calls – at smtp.yandex.ru.

After completing the verification and confirming the entered information, you need to save everything. If necessary, you can synchronize your contacts. After all these steps, the Yandex mailbox will work safely.

On Rambler, e-mail is configured in the same way, only the protocols suitable for a given mailer are prescribed (Yandex is replaced by Rambler).

Useful materials:

Use mail through the standard application on iPhone Also comfortable, how to use SMS. You won't miss an important email and will be able to respond to it instantly. Unfortunately, the application does not yet know how to send photos. And at the same time, there is no need to install unnecessary applications. But you'll need to dig into the settings to make it work.

Since the most popular email client for our users is Mail.ru, in this article we will tell you in detail how to set up Mail.ru. For other mail servers the principle is the same. If you have questions about other mailboxes, ask, we will be happy to help with the settings.

So, we pick up our iPhone and teach it to read our letters and answer them.

1. Open Settings and select “Mail, addresses, calendars”

2. Click “Add account”.

4. Feel free to click “New Account”

5. In the window that appears, fill in all the fields.

Name – the name that will be displayed in all messages in the “From:” field

E-mail – your email, which is registered on the Mail.ru website. We contribute in full from @mail.ru

Password – Password from your email

Description – Account description, enter Mail.ru

7. In theory, everything should be configured automatically. Close Settings and go to the Mail app. Check that you can see all the messages from your inbox and try sending someone an email to check. If everything worked, then Mail on your iPhone is successfully configured.

If not, then you’ll have to go deeper and check your mail settings:

Namely:

1. Go to “Settings” – “Mail, addresses, calendars” - our created mail

2. Select SMTP in the “Outgoing Mail Server” section

3. If you already have Mail.Ru mailboxes configured in your mail client, click smtp.mail.ru in the “Primary server” section (if there are no mailboxes configured, click “Not configured”, in the “Node name” column indicate smtp.mail.ru, click “Save” and click smtp.mail.ru again).

4. Verify that the “Use SSL” switch is set to ON and the server port is specified 465. As you can see in the picture, everything works for me with port 587 :-)

5. Click “Done”, “Back” and select the “Advanced” tab

6. Make sure that in the “Inbox Settings” section, the “Use SSL” switch is set to ON and the server port is specified 993 .

That's it, now Mail will definitely work.

And now the best part, like this You can connect all emails that you have. And they will all be in one standard application. It’s very easy to switch between them in the Mail application itself.

Keep up with your phone, keep up with the times.