Can a laptop distribute wifi windows 10. Turning on wifi. Allow connected devices to use the Internet connection

Most laptops already come with built-in Wi-Fi adapters. You can also purchase a USB Wi-Fi adapter for your desktop PC and use it. The basic idea is that your computer has the ability to connect to a variety of wireless Wi-Fi networks if everything is configured correctly.

However, many users are faced with the inability to find any Wi-Fi networks after upgrading to Windows 10. Some users claim that no wireless networks appear in the list of available connections, despite the fact that everything is configured as it should.

Other Windows 10 users claim that they are unable to identify any wireless networks, and some are experiencing a situation where they are able to join a previously connected network, but other networks remain unreachable. In general, for many users, after upgrading to Windows 10, Wi-Fi breaks.

Typically, this problem relates to the drivers for the WLAN card if you have a laptop or Wi-Fi adapter if you use one to receive a wireless network on your desktop PC. Drivers from a previous version of the Windows operating system, i.e. from Windows 7, 8 or 8.1 in most cases cause compatibility problems, since drivers from previous Windows do not always fit the newer version of the OS. In cases of incompatibility or damaged drivers, the WLAN card may simply not work correctly with your computer.

Wi-Fi adapters also have their own regional settings, due to which you cannot join an available network. These regional settings exist to prevent you from joining a Wi-Fi channel whose frequency is outside the frequency range for your region. If your Wi-Fi network is on one of the prohibited channels, then it will not be accessible.

Let's look at the methods by which you can fix problems when searching for a Wi-Fi network on Windows 10, regardless of its cause. However, first you need to make sure that you are within range of the signal and that your network is not masked. Restart your router as a precaution.

How to fix Wi-Fi connections not showing up on Windows 10

Method No. 1 Update Wi-Fi adapter drivers

• Press the key combination Win+R.
• Write in the blank line devmgmt.msc and press Enter.
• Expand the “Network Adapters” tab and find your Wi-Fi drivers. If you do not see your Wi-Fi adapter, then it is probably located in the “Other devices” tab, since there are no drivers installed on it.
• Right-click on your adapter and select Update Driver.
• Select automatic search for drivers.

After installing the drivers, check whether the Wi-Fi network you need appears in the available connections. Most often, this problem occurs precisely because of uninstalled or outdated drivers.

Method No. 2 Rolling back drivers for the Wi-Fi adapter

If updating the drivers did not fix the problem, then perhaps it will be solved by rolling back the drivers to an older version. To do this, do the following:

• Open Device Manager again as shown in the previous method.
• Find your Wi-Fi adapter and right-click on it again.
• This time select "Properties".
• Go to the "Driver" tab.
• Click on the "Roll Back" button.

Try looking at available wireless networks. It is possible that things will go much better with an older version of drivers.

Method No. 3 Removing the Wi-Fi adapter and restarting the PC

Using this method, you can remove all drivers for your Wi-Fi adapter and subsequently install them completely. To do this, do the following:

• Go to Device Manager again.
• Find your Wi-Fi adapter and right-click on it.
• Select "Delete".
• Close Device Manager and restart your computer.

As soon as your system is completely rebooted, it will automatically download the latest drivers for the new, and in our case, removed equipment. After that, try to check for the problem of no available Wi-Fi connection on Windows 10.

However, if the drivers were not reinstalled when the PC was restarted, which is possible, then you can manually update the hardware configuration in Device Manager. To do this, do the following:

• Press the key combination Win+R, enter devmgmt.msc in the empty line and press Enter.
• Find "Action" in the menu bar and select it.
• Then select "Update hardware configuration".

After selecting this option in Device Manager, drivers for your Wi-Fi adapter will be installed automatically. Try checking the availability of the wireless network from your Wi-Fi adapter.

In this article we will try to figure out how to distribute Wi-Fi from a laptop (computer) on Windows 10? It is worth noting that today many already know that a laptop or personal computer with a Wi-Fi adapter can be used as a router for distributing the Internet network. Internet distribution is also carried out when a regular wired Internet is connected. A laptop with Windows 10 can also work as a router, increasing the range of Wi-Fi, thus distributing the Internet to which it is connected.

Wi-Fi network distribution on Windows 10

Many articles have been published on the Internet about ways to distribute an accessible Internet network from a laptop or PC via Wi-Fi, on different operating systems. In this article we will look at a detailed scheme for distributing wireless Internet from a computer device that runs specifically on the Windows 10 operating system. The process of creating an access point on this version of the OS occurs exactly the same as on the seven and eight.

In the first versions of the dozen, no significant software changes were introduced; only with the release of subsequent updates was the “Mobile Hot Spot” function added, which configures the necessary parameters automatically. But despite this, when setting up the distribution for the first time, you will need explanatory instructions that will help you quickly set up an access point in Windows 10. This publication also indicates some points on which it is important to pay special attention, for example, if you cannot start the configured network or the device fails get an IP address.

This instruction will be useful to those people who have not heard about the concept of virtual Wi-Fi, and how you can distribute the Internet from computer devices to other devices. Let's take the situation as an example: you are the owner of a laptop to which the Internet is connected via cable. In addition to the laptop, there is a phone, tablet or second laptop, which also requires Internet distribution only via a wireless network. There are two solutions here. The first is to buy a router, and through it distribute the Internet to phones and tablets. Second, refuse to buy a router and use a laptop or computer with a Wi-Fi beacon as one. The same can be done if, for example, it is connected to a wired network or 3G modem and you need to distribute the Internet network to other computers or other devices:

Method 1: standard Windows 10 function for distributing Wi-Fi to other computers and devices (smartphone, tablet)

• In order to use it you need to go to " Options" by opening the menu " Start«.

• Next to the section “ Network and Internet«.

• And then in " Mobile hotspot". Here, at the beginning, you can set the name and password for the network (optional) by opening “ Change" and after that press the button " On" data usage

If the process of setting up Wi-Fi distribution in the 1st way seems complicated, then you can turn to a program such as Connectify hotspot for help. Managing this program is quite simple. When setting up manually, you need to select the source for connection, as well as the Wi-Fi controller with which the distribution will be carried out. Enter the name of the network, as well as the password and the “enter” button. This way the Hotspot function will be launched and the laptop (computer) will be able to provide the Internet to other devices.

Currently, there are a large number of programs that allow you to quickly set up an access point. All of them are relevant for Windows 10. But in this instruction, as a second method, we will quickly configure how to turn on and off Internet distribution using the command line.

Method 2: Enable Wi-Fi hotspot on Windows 10 via command line

The main condition for starting network distribution is a valid Internet connection. The driver for the wireless network adapter must also be installed. Otherwise, the system should do everything on its own, with the exception of some nuances described below during the connection.

• First, make sure that Wi-Fi is turned on. You can easily check this by clicking on the Wi-Fi icon at the bottom right of your desktop.

• If there is an available network it will say " Available” (or in our case, just an icon with signal quality bars shown), as well as the above connected and available networks.

If the buttons WiFi"no and you can't turn it on, you need to open it first" Start menu", choose " Network and Internet" and further " Options«, « Ethernet" and in " Configuring adapter settings» Check to see if the wireless adapter is enabled. If it does not turn on, you need to check whether drivers are installed for it or try reinstalling it.

• If there is a button, then after checking the Wi-Fi status, you can proceed further. First of all, you need to implement launch command line on behalf of the PC administrator. To do this, right-click on the menu “ Start" find " Command Line (Administrator)"(you can also press the buttons " Win and X"). In the window that opens, you need to insert “ cmd" and press " OK. Then insert the following command into the open window with a black background:

Where: pc4me— the name of the network, which can be changed at your discretion.

12121212 — this is the password for connection (selected independently).

Correct execution of the command results in a report indicating that the created network mode is allowed.

• After this, you need to proceed to launching this network. This must be done by inserting the following combination:

• And after that we press enter.

• After this, the network should start and your device will distribute Wi-Fi.

After this, you can connect third-party computer devices to the network. But by default the system has the following: settings that do not allow other devices to use the Internet network, traffic will not be transmitted? In order for it to work you need share. The procedure for opening access to the network looks like this:

• Right-click on the connection icon, which is located in the lower right corner and click on “ Network Sharing Center«.

• In the window that opens, click on the section “ Change adapter settings", a window with available networks will open. Here, right-click on the adapter “ Ethernet" and go to " Properties". Then you need to select the section " Access", in which you need to check the box " Allow other users...". Next, select the connection that appears a little lower (as in the figure). In our case - " LAN connection 4"(on your laptop, the network on which Internet access is provided may have a different number). The picture (below) can be enlarged by clicking on it.)

• After these steps, save the settings by clicking on the “ OK«
• Now, to register the opening of access, you need to restart the distribution of the running network, to do this, in the line “ Execute"(described earlier), paste the following copied command below and press enter:

• And again we launch using the command already known to us:

netsh wlan start hostednetwork

After the operations performed, the function should work normally. Now you can turn on Wi-Fi on another laptop or device and connect to this network:

If the network does not work, which means you need to restart the laptop and restart the network again using the above command.

How to turn it on and off distributing Wi-Fi from a laptop on Windows 10? Control commands

After the laptop reboot process, you will need to constantly enter the following command to create an Internet distribution mode:

netsh wlan start hostednetwork

If you need to stop the network, you need to enter the following command:

netsh wlan stop hostednetwork

The following command is used to change the username and password:

netsh wlan set hostednetwork mode=allow ssid=”pc4me” key=12121212″ keyUsage=persistent

Network name and password (ssid=” pc4me"key= 12121212 ") is entered at your discretion.

Creating (on desktop) files for direct control of distribution

The process of creating a network is performed once, and the distribution must be started every time after the laptop is rebooted. Constantly copying and entering the command line is not very convenient for users of computer devices, for this reason it is recommended to create the following files for management:

• The first file that will start the network;
• The second is to stop her.

To do this, you need to create 2 text files on your desktop start.txt And stop.txt.

And rename the document with the extension .txt to a system file with the extension .bat. But the problem is that by default, Windows 10 displays files without an extension. To display it, you need to open " Conductor", click on the tab " View" and remove the check mark from " File name extensions«.

Then (for the first file start) you need to right-click and select the line “ Rename" and enter the extension after the dot .bat. It will look like a file start.bat. You can choose the file name (up to the dot) at your discretion, and the extension must be replaced with .bat.

Then click on the file start.bat right-click and select the line “ Change«.

Now you need to copy and paste the command into the file: netsh wlan start hostednetwork. Now close it, saving all changes by clicking on the tab "File" and select " Save«.

So you get the files start.bat, double clicking on which starts Wi-Fi distribution. With file stop.txt you need to do the same steps to create a batch file stop.bat. For it, enter the combination “ netsh wlan stop hostednetwork". When you run this file, the network will stop.

The laptop does not provide Wi-Fi, devices cannot be connected, or distribution does not start?

Often, users who have completed all the steps described above still do not have an Internet connection and distribution still does not start. Let's look at several troubleshooting methods and also deal with them.

• If distribution is not carried out or the device does not connect to the network, you can try rebooting the device. Sometimes this solves the problem. Also, commands must be run as an administrator; this point is very important.
• If there is problem with network creation using the first command in the instructions, it is worth checking the Wi-Fi status, which should be turned on. If it is impossible to turn on Wi-Fi, then most likely the adapter drivers are not installed on the laptop. And after installing the driver, try creating the network again.
• If Internet distribution does not start if the network driver is installed, you need to update it. To do this, it is recommended to download it from the official website.
• Sometimes the problem can be fixed by rolling back the driver to a different version. To do this you need to enter " device Manager"Windows 10 (login via " Start"), then select " Network adapters", by clicking on the desired device, select the tab " Properties", then " Driver" And " Rollback«.
• The network has started, but devices are not connected. In such a situation, you should disable your antivirus program and programs that block the connection.
  You also need to check that the password was entered correctly or try to restart the network by entering a new password.
• A common problem is that Internet distribution is configured, but traffic is not transmitted. In such a situation, you need to find out whether there is Internet on the PC from which you plan to distribute the Internet. If the Internet is active, then you need to proceed to the next step - this is checking the sharing settings that the user should have made when starting the network. You can also turn off your antivirus or firewall, as they may block access.
• If after starting Wi-Fi distribution, another connection is created in the network settings, then in this case you need to click on it and select “ Intelligence" You need to check the address in the window IPv4. By default, " Automatic Network Settings". It is also common for users to allow network broadcasting for another connection.
• Access must be enabled for the connection you are using. For example, a user is connected to one network, but needs to start distribution from another, then in the “ Access"(Ethernet connection properties) you need to provide access to the desired one.

Error with title " Failed to start hosted network... are not in the right condition..."

It often happens that on Windows 10, when starting a virtual network, a window appears with the inscription “ The hosted network failed to start. The group or resource is not located...operations" or " The Wireless Network AutoConfig (wlansvc) service is not running. Failed to start hosted network»

To fix this problem you need to enter " device Manager": open the menu " Start", and further " Options"PC and go to " Devices" and to the bottom right open " device Manager". Then, in the open manager, click on the tab “ View", in the menu that opens, click on the line " Show hidden devices«.

In folder " Network adapters» find adapter « Microsoft Hosted Network Virtual Adapter". Then right-click on it and select the line “ Engage«.

Then try again to launch with this combination - netsh wlan start hostednetwork.

• There may be other services that will appear as unused and need to be started as well.
• If there are no signs of a wireless Wi-Fi network and its adapter is not reflected in the device manager, most likely the laptop does not have a driver for it. It is also possible that the driver does not support virtual networking. In this case, you need to download the latest (updated) drivers from the official website of the laptop manufacturer.

If the function " Hot spot” has already been launched before, then there should not be any problems with the distribution of the Internet via Wi-Fi on Windows 10.

A lot of articles have already been written on the topic of launching virtual Wi-Fi networks on laptops. We will now set up Internet distribution via Wi-Fi in Windows 10. Honestly, you can distribute the Internet from a laptop, if it runs on Windows 10, in exactly the same way as on Windows 7 or 8. Almost nothing has changed there. But I think that an article specifically on setting up an access point in Windows 10 will definitely not be superfluous.

If you are not yet in the know, what virtual Wi-Fi actually is, and how to do it from a laptop or desktop computer (with wireless adapter) you can distribute the Internet to other devices, then I will now try to explain everything. Look, you have, say, a laptop, the Internet is connected to it via a network cable. And also, you have a phone, tablet, another laptop, or other device that can be connected to the Internet via a wireless network. Yes, you can buy a router and distribute the Internet to other devices. Or you can skip buying a router and use your laptop as a router.

This thing can also be useful if you have Internet via a 3G modem, and you need to distribute it to other devices. In any case, the function is useful and it really works. Now we will configure an access point (hotspot) on Windows 10.

If the hotspot does not work for you (for example, you have a high-speed Internet connection), then use the method that I wrote about below.

You probably already know that there are a lot of excellent programs that allow you to launch an access point without any problems. Yes, they also work on Windows 10, and we will definitely check them, perhaps in a separate article. And now, we will configure everything via the command line. Everything is very simple and clear, you’ll see now.

If this method seems difficult to you, you can try it. And also, universal instructions for launching an access point with different programs.

Wi-Fi hotspot on a Windows 10 laptop

The main thing is that you must have an Internet connection and it must work. I have a regular Ethernet (network cable) connected. Also, you must have the driver installed for the Wi-Fi adapter. Typically, Windows 10 installs this driver itself. Simply put, your Wi-Fi must be working and turned on. It's very easy to check:

I already wrote what to do if you have, and you can’t turn it on. Is it possible. And if everything is good, then you can continue. First, we need to open a command prompt with administrator rights. Press the keyboard shortcut Win+X, and select Command Line (Administrator).

You can set your network name and password:

• site is the name of the network, you can change it to your own.
• 11111111 - in my example, this is the password that will be used to connect to the created network.

With this command we create the network itself, set a name and password. If the command is executed correctly, then you will see a report that Hosted Network Mode is enabled and all that. Like in my screenshot above. Now we need to launch the created network. This is done with the following command:

Once completed, you launch the network. The laptop will already distribute Wi-Fi.

You will be able to connect your devices to the running wireless network, but the Internet will not work. We need open public Internet access. In Windows 10 this is done like this:

Right-click on the connection icon and select Network and Sharing Center.

On the left we select Change adapter settings.

Further attention, right-click on the adapter through which you are connected to the Internet. If you have a regular connection via a network cable, as is usually the case, then it is most likely an adapter" Ethernet"Also, it can be a high-speed connection. In the drop-down menu, select Properties.

Go to the tab Access, check the box next to the item Allow other network users to use this computer's Internet connection. Then, below, select the connection you have from the list (see example screenshot below). I call it " LAN connection* 4". For you, it may be called differently (as a rule, only a number can be different).

Very often, it is not possible to select the desired network from the list. I wrote how to solve this problem in a separate article: .

After these steps, it is advisable to stop the network we have launched; this is done with the following command:

netsh wlan stop hostednetwork

And then, start the network again with the command:

netsh wlan start hostednetwork

Everything should work. Turn on Wi-Fi on your device and connect to the network we just launched. Here I launched a virtual Wi-Fi network in Windows 10 on a tablet:

If the network does not work, then restart your computer and start the network again. The team I wrote about above.

How to manage Wi-Fi distribution from a laptop on Windows 10?

Every time after restarting the computer, when you want to distribute the Internet, you will need to start hotspot with the command:

netsh wlan start hostednetwork

To stop the network, run the command:

netsh wlan stop hostednetwork

And to change the network name or password, run the command:

netsh wlan set hostednetwork mode=allow ssid="site" key="11111111" keyUsage=persistent

Changing the password and name to your own if you want.

Creating files for management

If we need to create a network only once, and when you want to change the network name or password, then you need to start the distribution after each shutdown of the computer. It is not very convenient to open the command line every time, copy the command and execute it. Therefore, I advise you to create two files: one to start the network, the second to stop it.

We do this: create a text file on the desktop and rename it to start.bat. The file name can be anything. The main thing is that the expansion is .bat.

Right-click on our .bat file and select Change. Next, copy and paste the command into it:

netsh wlan start hostednetwork

Close the file and be sure to save the changes in file.

That's all, now we have a start.bat file, by clicking on it (double-click), Wi-Fi distribution will immediately start. In exactly the same way, you can create a file to stop the network. Name the file for example stop.bat, and insert the command “netsh wlan stop hostednetwork” into it. After running this file, the virtual network will be stopped.

Update: if necessary, you can make sure that the laptop starts distributing the Internet automatically immediately after turning it on. I wrote how to do this in the article: .

What to do if the laptop does not distribute Wi-Fi, the Internet does not work, or devices do not connect?

If you launched a network on your computer with Windows 10, and you are having problems with the launch itself, connection, or access to the Internet, now we will try to sort out these problems.

• If any problem occurs, the first thing to do is restart your computer and check whether you are running the command prompt as an administrator. It is important.
• It may be that I can't create the network itself (the first command from this article). In this case, check if your Wi-Fi is turned on (I showed how to do this at the beginning of the article). If you cannot turn on Wi-Fi at all, then most likely you do not have the driver installed for the wireless adapter. Install the driver and try again.
  If the driver is installed, but you still cannot start distributing the Internet, then try updating the Wi-Fi driver. Download it from the manufacturer's website for your laptop model and OS.
• If the network is running on the laptop, but devices do not connect to it. First thing, disable your antivirus and firewall (if any). Or other programs that may block the connection.
  Also, check if you are entering the password correctly. You can restart the network with a new password. And look at the tips from the article.
• A very popular problem: when there is a network connection, all devices will connect perfectly, but Internet does not work, sites do not open. Solution: first of all, you need to check whether the Internet works on the computer from which you want to distribute the Internet. If everything is ok, then check the Internet sharing settings, which you should have set during the network launch process. See above how we allowed the Internet connection to be used.
  You can also try disabling your antivirus, firewall, etc. I will prepare a separate article on this problem:.

Error: The hosted network could not be started. The group or resource is not in the required state..."

A very popular problem is when on Windows 10, when trying to start a virtual network, the error “The hosted network could not be started. The group or resource is not in the correct state to perform the required operation."

In the comments, Anton advised to do this: go to the device manager. Start - Options - Devices, and select from below device Manager. Next, in the manager, click on the tab View, and select the item Show hidden devices.

Open the tab Network adapters, look for an adapter called “Microsoft Hosted Network Virtual Adapter”, or “Virtual Hosted Network Adapter (Microsoft)”, right-click on it, and select Engage.

After that, we try to start the network with the command netsh wlan start hostednetwork.

If you do not find such an adapter in the task manager, or you have no signs of Wi-Fi at all (for example, an item in the settings, a power button), then most likely you do not have the driver installed for the wireless adapter. Or, it just needs to be updated. It may also be that the driver does not support a virtual network. Check out the article. In it I wrote about a similar problem. If you have already launched hotspot before, then there should be no issues with Wi-F distribution in Windows 10.

Video: setting up Wi-Fi distribution in Windows 10

I have prepared a short video in which you can see the launch of an access point in Windows 10 (choose maximum quality and make it full screen). By the way, this is my first video instruction, so please don’t scold me too much :)

If something didn’t work out for you, or some points from the article remain unclear, then write in the comments, I’ll try to help.

If your computer is equipped with a Wi-Fi module, you can easily enable Wi-Fi on your Windows 10 device. We will tell you how to do this as simply as possible, and how to use it effectively.

All builds of Windows 10 support wireless connections. Therefore, the question of how to enable Wi-Fi on your device with such a system should certainly have a solution. The new OS from Microsoft has received many innovations. And one of them was a change in the principles of turning on a wireless network and connecting to it. If you perceive such innovations negatively, then after a while your opinion will probably change, since this is actually an improvement. The point is that you will eventually understand - the new way of turning on the adapter has become better.

Trying to turn on Wi-Fi in a laptop on Windows 10

If you have used a mobile phone before, you probably saw an icon there that appeared after this device began to receive a signal from the wireless network. There is something similar to this in the “top ten”. If you look closely at the bottom right corner, you will find the exact same image. Click on it and you will see settings for some wireless connections, and the signal strength from each of them will be shown. If you know the password for any network from this list, then you will be able to connect to it.

But it happens that in this way you will not be able to connect to the Network, since your module is not currently working. Or it's simply missing. We will not discuss physical problems in this article, but we can talk about some software settings.

If you want to connect to wireless network connections, then you need to open the Network Sharing Center on your laptop and go to the wireless adapter settings. Although it may turn out that it just needs to be turned on. After all, if all the necessary drivers are installed on the device, and the module itself is working properly, then there should be no problems with the connection.

It happens that turning on Wi-Fi in a laptop on Windows 10 is possible only after the drivers in the system are updated. So if you can download them from the device manufacturer’s website, then all your problems will be solved.

Common reasons why the wireless connection does not work

Wireless connections may not work for the following reasons:

• No adapter included;
• Incorrect driver settings or outdated versions in the system;
• Disabling the adapter using software methods;
• The adapter itself is physically missing or it is broken.

Of course, this is an incomplete list, and it can be expanded ad infinitum. But these are the most common reasons. Moreover, from this list we can identify the most common causes of problems.

The first is that the computer does not have the required module. Whether it exists can be seen using or using .

The second is that you don’t have drivers. Of course, this is trivial, but many, unfortunately, forget to install them and then the device does not work. Don't make this mistake and install all supporting software.

We hope that you will not encounter any of the problems listed above, because you have been warned about them, which means you are armed. Moreover, you now also know how to enable Wi-Fi on any Windows 10 device, which means that you most likely will not have any problems. And if it happens, write in the comments, we’ll watch and figure it out together.

• Useful programs for Windows 10

There are times when you need to distribute the Internet via Wi-Fi to other laptops, tablets or smartphones using a Windows 10 laptop. For this purpose, the top ten has created a special virtual WiFi technology. Thanks to this technology, a virtual Wi-Fi adapter is created, with which you can set up a personal Wi-Fi network for distributing the Internet.

In this material we will take a detailed look at the work Virtual WiFi in Windows 10, and also get acquainted with the utility MyPublicWiFi, which performs the same actions in the windowed interface.

Despite the fact that all the examples in the article were made in version 10 of the OS, you can use the same methods to distribute WiFi in other Windows.

Checking the compatibility of a wireless network Wi-Fi card with virtual WiFi

First of all, we should check the compatibility of our network adapter with the “Virtual Wi-Fi” development. To do this, open the console with administrator rights. In Windows 10, this can be done by right-clicking on the menu shortcut " Start».

Then select the item “ Command Line (Administrator)" In the open console, type the control line netsh wlan show drivers

If there is a clause “ Hosted network support: yes" in the console, be aware that your wireless network card has support for "Virtual WiFi". Presence " Hosted network support: no" means that it is impossible to create a virtual network for distributing the Internet.

In many cases, if when checking your network adapter does not support “Virtual Wi-Fi”, then the problem can be solved by by updating the driver your network card. You can find the latest drivers on the wireless card manufacturer's website or on your laptop's website. In the example considered, the adapter is used Realtek RTL8188CE, which one there is support this technology.

Creating a virtual mesh in Windows 10

First of all, we initiate the wireless network. To do this, in ten, in the console (must be in administrator mode), type the control line netsh wlan set hostednetwork mode=allow ssid=test_grid key=GS6-C3_4zSmtug07uk3Y Here under the value test_grid is understood as the name of our network, and GS6-C3_4zSmtug07uk3Y indicates the set password. As you can see, the password is quite complex and is 116 bits long. This complex password is used to ensure that your network is secure.

Now we just have to put the grid into operation. For this purpose, enter the following command into the console: netsh wlan start hostednetwork This line will make your network active and will allow other Wi-Fi computers to connect to it.

The final step will be enable sharing adapter to which Internet connected.

Note! It is very important to open general access ONLY in the settings of the adapter through which your computer is connected to the Internet. Do not change the access settings on the newly created wireless connection.

To do this, go to Network Connections. This can be quickly done in the program " Execute» command « ncpa.cpl" After that, find the adapter connected to the Internet and go to its properties. Go to the " Access» and check the boxes as shown in the figure below.

If you want disable network, then enter the command netsh wlan stop hostednetwork in the console, after which the network will stop functioning.

You can view the network parameters in order to configure it later using the following commands:

• The command that will output all characteristics your network: netsh wlan show settings
• The command that will display security properties Wi-Fi networks. With its help you can also find out the password you created for it: netsh wlan show hostednetwork setting=security

We share access to the World Wide Web on a laptop using the MyPublicWiFi utility

You can download this utility from its official website www.mypublicwifi.com/publicwifi/en/index.html. According to the developers, it is fully compatible with Windows 10. After downloading MyPublicWiFi run the installer.

The installer will prompt you to click the Next button, which we will click to go to the next window.

In this window you can select the installation location MyPublicWiFi. After selecting the location, also click the Next button.

In the window that appears, check the box “ Create a desktop icon"to create a shortcut on the Desktop and click Next. In the next window, click the Install button, which will start the installation process. In the final window, the installer will ask you to restart your computer. This is necessary for the further launch of our utility.

After reboot let's run the utility using a shortcut on the Desktop to configure it. Now let's enter our settings network name And complex password, and also select the adapter from which the Internet will be distributed.

To start our virtual network, click the button Setup and Start Hotspot. After this action, the program will make settings and launch the virtual network. To disable the virtual network, you must click Stop Hotspot.

On the second tab " Clients» You can view the connected devices to your access point. I would also like to note that thanks to the enabled checkbox “ Enable Internet Sharing"We do not need to manually enable the Internet for a network adapter that has a direct connection to the Internet.

As can be seen from the example, using MyPublicWiFi It is much easier to create a virtual Wi-Fi network, in contrast to the “Virtual WiFi” technology.

Let's sum it up

In this material, we looked at the development of “ Virtual WiFi» in Windows 10, and also got acquainted with the utility in detail MyPublicWiFi. Most of all utility MyPublicWiFi suitable for beginners, as it allows you to set up an access point in a few minutes without using the command line. In fact, MyPublicWiFi is a window add-on for “Virtual WiFi” and is absolutely free.

Our material will be especially useful in situations where you are out of town, and there is only one 3G modem and you need to distribute the Internet through it to several laptops. This information will also be useful if your new office does not have the Internet, and you only have a laptop with a 3G modem and a dozen nettops to which you need to distribute the Internet. We hope our article will help you create your own virtual access point and allow you to solve your Internet problem.

Video on the topic