What to write in the command block. Command block commands. How to make a command block: ways to obtain it. Who has access to the command block

Today we will talk about what a command block is in Minecraft, how to get it, why it is needed and how, where and what it can be used for.

What are command blocks?

In Minecraft, a command block (CB) can automatically execute certain console commands as long as it is activated by a red stone.

They work in adventure mode, and allow map creators to improve interaction with the player. In this case, the player is not able to destroy blocks and build new ones.

In Survival mode, command blocks cannot be interacted with or destroyed.

They cannot be created through crafting, and they cannot be found in the inventory when playing in creative mode. Creative mode players and server admins can use the "give" console command to gain KB or make it available to other players. It looks like this:

/give minecraft:command_block

When typing the command, remove the parentheses around the player name and number:

/give atombox minecraft:command_block 1

KB has a graphical interface with a text field, accessible by right-clicking the mouse.

Only players in creative mode and players with administrator status on the server can place command blocks, enter commands and save changes.

To use them in single player or multiplayer worlds, you must enable LAN mode and enable cheats.

Where are command blocks used?

Have you ever played on adventure maps where it's always night, or where the weather never changes? You may have downloaded maps where players receive special rewards, upgrades, or experience by pressing a button or completing a task. All this becomes possible thanks to KB. When creating your Minecraft map, you need command blocks if:

Do you want constant day or night;
Do you want to change the weather;
Do you want to change the difficulty of the game;
You want to produce a specific sound;
You want to send a message to the player;
You want to teleport to another location;
You want to give players items.

There are many videos on YouTube describing a variety of Minecraft maps. Multiplayer maps are especially popular. There are many categories of Minecraft maps available for download that use command blocks to enhance the player's experience. There are many reasons for map developers to use them. Among them are cards of the following categories:

Adventure cards;
Parkour maps;
Puzzle cards;
Survival cards;

Adventure cards are focused on the plot, and the gamer acts as the main character of the story. Previously, adventure maps relied on telling a story through signs and books, but now the storytelling is available through dialogue and sounds, all thanks to KB.

Parkour maps force the player to get from one end of the world to the other with a minimum number of deaths. They often contain incredible jumps and other deadly obstacles. Command blocks make it possible to set character spawn points in front of complex obstacles.

Puzzle cards emphasize problem-solving skills by introducing mazes, traps, and other challenges. Some of these cards have a plot, just like adventure cards. Using KB allows such maps to more easily suggest directions, story-related dialogue, and sounds.

Survival Cards may focus on survival in single player or multiplayer, or include a story along the way. KBs can give players a starting spawn point as well as story-related information. The possibilities here are endless.

How to use a command block

Installing them is easier than most Minecraft players think. The commands can be confusing, but some of them (like setting the time of day) are very simple to program. Larger projects can be planned later, but first try to master the basics of placing, configuring and using KB.

Remember that command blocks can only appear in creative game mode. To switch to it, you need the appropriate privileges on the server (if available) or activated cheats.

In the chat field, type "/gamemode c", "/gamemode creative" or "/gamemode 1" without quotes.

2. Right-click on the command block

In creative mode, to access a command block, right-click on it. To generate it, you need to use the “give” command, as described above in the text:

/give minecraft:command_block

Command blocks only work when connected to the electrical circuit of the red stone (by the way, there is a good mod that allows you to increase the distance of energy transfer). Right-clicking opens a dialog box where you can enter a server command. The maximum command length can be 254 characters.

3. Enter the command and click "Done"

When you enter a command into a block, you need to indicate which player it is directed at. This can be done by entering the player's name or selecting three different variables: "@p" (nearest player), "@r" (random player) or "@a" (all players). These variables are especially useful in situations where the player activating the command is unknown. After specifying the command, click “Done” to save it.

Remember that one KB can only execute one command!

Practical use cases

The following examples are simple and practical command block applications in single and multiplayer in Minecraft worlds.

How to change the rules of the game

Game Rules are a relatively new feature that allows players and command blocks to change certain basic settings in the Minecraft world. There are nine described game rules that can be controlled using the command block on the map.

You can use game rules to create constant daylight or darkness, turn off mob spawning, mob item drops, and much more. When entering the "gamerule" command, use the following command:

Game rule	Effect of the rule
commandBlockOutput	Enables/disables text input in KB
doDaylightCycle	Enables/disables day/night cycle
doFireTrick	Enables/disables fire propagation/disappearance
doMobLoot	Enables/disables item drops from mobs
doMobSpawning	Enables/disables mob spawning
doTileDrops	Enables/disables items falling out of the KB when they are destroyed
keepInventory	Enables/disables saving items in the inventory after the death of a player
mobGriefing	Enables/disables destruction of KB by creepers or edge wanderers
naturalRegeneration	Enables/disables health regeneration for players

How to set the weather

Some maps have a dark theme that goes perfectly with rainy weather or thunder, while others are best played with clear skies. There are many options for controlling the weather using command blocks. A simple example of a weather command:

In this case, the word input can be replaced with “clear” (clear), “rain” (rain) or “thunder” (thunder).

You can connect a button or lever to the command block to manually change the weather, or create an automatic redstone circuit to constantly change the weather. This is easily achieved by using repeaters, a button and a building block.

How to set the spawn point

Spawn points are an important component of many Minecraft maps, including adventure maps, parkour maps, puzzles and others. Having to replay the map from the very beginning every time you die is extremely annoying. Using the “spawnpoint” command, you can save your game progress and be reborn after death at the nearest completed checkpoint. The command looks like this:

By connecting a command block to a building block with a button or pressure plate, players can set a spawn point at the location of the command block.

If you need something more complicated, you can add coordinates to the command to specify the location of the spawn point.

Running from one place to another is tiring, especially on a multiplayer server. Using the “teleport” command, players can move to specific coordinates in the Minecraft world or to the locations of other players. Enter in the command block:

With them you can have a certain set of coordinates for teleporting the player, like the location of the next part of the adventure map.

If the block is not intended for a specific player, "@p" can be used to select the closest player.

If you're on a multiplayer server, you can bind the command block to yourself by using your Minecraft username.

These are just a few options for using command blocks in single-player and multiplayer Minecraft games. There are many significantly more complex commands and redstone schemes that map makers use.

The command block appeared in the popular game Minecraft only in version 1.4, where the latest functions are unlocked for game participants. With this version, gamers learned about the concept of a command block, as well as its connections with the console command. It is impossible to create it yourself.

The command block is a special item; various codes can be entered and written into it. After this, it begins to execute the intended command when it receives a redstone signal. Such a universal thing significantly expands the powers and capabilities of map creators that feature an adventure mode. In places like this, you can make the area private. It can be opened in Minecraft using the right mouse button. As a result, you will see a window in which certain characters are written.

How to make it

Most players will be disappointed because it is impossible to do such a thing on their own. The reason for this limitation is due to the fact that it opens up incredible opportunities, namely that thanks to it you can control the map, chat with all the players at once. Therefore, you cannot do it yourself, but there is a unique chance to get it.

Purchase options:

If you are the creator of the server, you can easily use it.
You can also get permission from the administrator of a specific server, namely ask for rights. To do a similar action, use the following function - give Player command_block. Enter your character's name.
You can make a command block in Minecraft using a special cheat code. But, you will only need to play on a specific server that supports the use of such codes. The final stage is activation, which is carried out thanks to the action of the red stone.

Teams

If you want to get the entire list of commands that can be used, then use the chat and enter the word help. For example, to get ten iron ingots, you need to enter the following form - give @p iron_ingot 10. Another one will allow you to teleport to the desired point with the specified coordinates, namely tp Player 42 21 60.

Pointers to Minecraft players.

@e – absolutely all entities in the game;
@a – all Minecraft participants;
r is the maximum search radius;
rm – minimum radius;
m is a game mode.

As you can see, this is a fairly practical, interesting and easy-to-use program that allows you to increase your powers, adrenaline and pleasure in the game to the maximum. It is important that you cannot build or craft it yourself, so you need to use a special command, then you will succeed. Have a good game and new victories.

When creating any playable map that will differ from randomly generated areas, construction, pixel art or story scenarios, the server administrator cannot do without using the “built-in” functions. To implement them, you can use a command block. This is a special device in which you can record a system command, starting from the player receiving a resource and ending with his teleportation to a specified location. But how do you issue yourself a command block?

Warning

There are only two ways to purchase this item. Both of them are that you will need to use system commands. This comes from the fact that it is impossible to make (craft) with improvised materials. That is why the question: “How to issue a command block to yourself?” - remains relevant always. No matter what mods you set for yourself, no matter how you experiment with the ingredients, nothing will work out for you. Anyone who claims that by downloading his mod you will be able to create command blocks is a scammer who is trying to plant a virus on you. So how do you issue yourself a command block?

Methods

The first method of obtaining a command block is that you can create a map in creative mode. The Command Block will be available for purchase among other items.

The second method is a little more complicated. To do this, you will have to use How to issue yourself a command block using the system? To do this, you will have to open the chat and write the following: /give [name:command_block [number]. This command will also be the answer to the question of how to give it to another player.

All syntax is written without parentheses. Instead of the character's name, you must indicate the nickname of the desired player, the number is the number of command blocks received. By the way, the main condition for this command to work is permission to use cheats. If this feature is disabled, you will not receive this item in either single or multiplayer games.

Application

So, let's say you figured out how to give yourself a command block, and it's in your inventory. Now let's learn how to use it.

To place a block on the ground, drag it to the quick access panel. After that, select it and click on the desired place. At this moment, a control interface will open in front of you, with which we will enter the function. It is worth considering that one command block can execute only one instruction.

However, it is not always necessary for the player to be able to find a command block and use it. It is much more interesting for the user to press the lever, and a mountain of gold or necessary items appears in front of him. In this case, you can use redstone circuits.

Teams

In order to use a command block, it is not enough to know how to obtain or install it. The most important thing is to be able to correctly write the instruction syntax. To do this, it is important to remember a few simple rules.

First the command itself is written. Any function that can be activated using the console can be written here.
Then the “area of application” is set. That is, the player to whom the effect or coordinates of the appearance of the item will be applied.
And finally, additional arguments that allow you to clarify the characteristics of the object.

In general, the command will look like this.

/[command] [player nickname or coordinates] [parameters]

To make it clearer, let's give some real examples. Let's start with how to issue items with a command block.

/give @p iron_ingot 30

Using this instruction, the command block will give the nearest player within a radius of 10 blocks iron ingots - 30 pieces. Now let's see how to work with coordinates.

/spawn 10 20 30 /summon EnderDragon

Actually, from the syntax it is already clear that the command summons a dragon at certain coordinates. Finally, note that the full list of commands used by the command block can be seen by entering /help in the chat.

Command block- a non-transparent block that cannot be crafted. This block is necessary to activate a variety of commands that are written in the command console.

How to get a command block in Minecraft?

To get it, you need to enter the following command in the chat without parentheses: /give [Your_Nick] command_block [Desired number of blocks]. For example, /give Razmik command_block 1. After pressing the Enter button, the command block will appear in your inventory.

How to activate a command block in Minecraft?

You can activate the code you entered in the command block using a lever, redstone, redstone torches, or through a button.

Let's look at the simplest commands that can be used in a command block.

Changing the time of day. For example, you want night to fall. To do this, install the block, click on it with LMB and enter the following command in the console: /time set night.
Teleportation. For example, you need to teleport to some point on the map. To do this, go to the selected point, press F3 and remember the x, y, z coordinates. Then we go to the command block and enter the following command: /tp @p 252 56 -175. The numbers 252 56 -175 are the coordinate values x,y,z.

There are a huge number of commands, the simplest of them are given above.

GIVEAWAY OF ACCOUNTS/KEYS/BASES/FREETIES

The execution of any actions assigned by the game participants is carried out by command blocks. You won't be able to create a team like this while playing in survival mode. Summoning them as tools while using creative game mode will not work either. To functionally obtain such blocks, you need to use a couple of fairly simple commands, which, in fact, will allow you to call them. Let's look at a few simple methods.

Get a Command Block in Minecraft: Method 1

Launch Minecraft and select single player mode. Create a world with cheats enabled.

Open the chat window and press the “/” key. This symbol will open a window in which you can enter commands.

Enter the destination you need by selecting from the following lines:

“/give” the name of minecraft:command_block and the required number - after entering it into the console, the summoned items will appear among the tools;
“/setblock x y z minecraft:command_block” – this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
“/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – by entering this sequence, the game participant will summon blocks where he needs them.

Get a Command Block in Minecraft: Method 2

Launch the game, select single player mode. Log in to an existing world, perhaps it will be a server. Enter the chat required to set commands by clicking on “/”.

Enter one of the suggested options:

“/give name minecraft:command_block required number” – this line allows you to summon the required number of items and add them to your existing inventory;
“/setblock x y z minecraft:command_block” – if you enter this text, you can replace any existing block with a command block, and to determine the location where it is located, you need to press the F3 key;
“/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – blocks will appear in the specified area.

Get a Command Block in Minecraft: Method 3

Using the "E" key, drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
Click on it again with the same mouse button. This will open a menu where you can configure actions.
In this window you need to enter the symbol “/”. The options in these blocks are similar to those used in chat. They are sometimes connected to an electrical board. This allows commands to be executed automatically.
Press the “/” key, a console window will appear in which write the word “help”. After it, type the name of the item to which the sequence of commands is prescribed.

A command block in Minecraft is a block into which you can enter various commands. After receiving a signal from the red stone, it will begin to complete the task assigned to it. The block greatly enhances the player experience and has many uses in gameplay. Thus, many gamers have a question about how to make a command block in Minecraft.

Creating a Command Block

It’s not possible to just take and make a command block (from English “command block”) in Minecraft. However, it can be obtained using special cheats and commands.

Start a single player game in Maine in creative mode.
In the world settings, enable the function of using cheats.
Puzzled by the question of how to make a command to issue a block in Minecraft, you need to open the console.
In the console line you will need to enter the command: give *player nickname* command_block.

After executing this command, the block will be in the hand of the corresponding player's character.

You can give a block to yourself, to another player, or to an entire group. They cannot be used in survival mode.

How to use the block

The block is widely used in the game, executing various commands.

When the command block is in the character's hands, right-click on the ground to place it. After this, you need to click the same button on the attribute itself.

This will open a command block window where you can enter the required task or change its parameters. In the future, changes can be made at any convenient time. If anything was done incorrectly, the user will receive a corresponding notification in the same window.

Blocks can be in passive mode, triggered by a chain reaction through similar objects, or triggered by a signal transmitted by a red stone. The command block can also have a direction, according to which you can build a whole chain of blocks that are triggered one after another.

If desired, the player can set a binding for the block. Using this function, you can kill specific entities or everyone in the area, in addition to the player himself. The block can also be configured to interact with other players.

In some situations, a command block can be used to teleport one player or an entire group. To do this, you will need to correctly specify not only the command, but also the coordinates.

In principle, the command block supports a lot of tasks, a full list of which can be found on numerous Internet resources. You can view the entire list of possible commands directly inside the game by entering /help in the chat window.

Video: How to use the command block in Minecraft.

The same commands as in regular chat. What is a command block, how to get it and how to use it? In this article we will tell you about it!

This is really a very useful block and it expands the possibilities of creating maps in Minecraft

You can find a complete list of commands at, but not all of them work in Minecraft on Android, IOS and Windows 10 versions.

+ command blocks in MCPE:

Unlike the PC version, in PE command blocks do not place heavy loads, i.e. FPS will be stable.
The command block interface is adapted for mobile devices.

- command blocks in MCPE:

Too little functionality.

How to get a command block?
In the game, you cannot get a command block by crafting, but you can issue it using the command /give Steve command_block, Where Steve nickname of the player to whom the team will give this block. Instead of Steve, you can also use @p, meaning you give the block to yourself. Don't forget to enable cheats in the world settings.

How to enter a command into a command block?
To do this, you need to open its interface. This is done very easily, just tap on it. In field Entering a command The command block itself fits in, which the command block will execute. Just below is a field where you can see an error if you entered something wrong.

Example commands:

give @p apple 5 - gives the player five apples.
setblock ~ ~+1 ~ wool - places a block of wool at the player's coordinates.
tp Player 48 41 14 - moves a player with the nickname Player to a point at coordinates x=48, y=41, z=14

Who do command blocks work with?
Thanks to pointers, you can point to the player or creature on whom the command will be executed:

@p is the player who activated the command.
@a - all players.
@r is a random player.
@e - all entities (including mobs).

Auxiliary pointers:
How can I make it so that, for example, it moves all the players to some point except itself? Yes, it’s easy, for this you need to use additional pointers, for example: tp @a 228 811 381- teleports all players except the player with the nickname Admin exactly x=228, y=811, z=381. All parameters:

x - coordinate along the X axis. If you put instead of the value ~
y - coordinate along the Y axis. If you put instead of the value ~ , then the dot will be the command block.
z - coordinate along the Z axis. If you put instead of the value ~ , then the dot will be the command block.
r - maximum search radius.
rm - minimum search radius.
m - game mode.
l - maximum experience level.
lm - minimum experience level.
name - player's nickname.
c is an additional argument to @a that limits the number of players to execute the command. For example, if you enter @a, the command will affect the first five players from the list, @a will affect the last five from the list.
type - as an example, the command /kill @e will kill all skeletons, and the command /kill @e will kill all non-player entities.

Example command:

give @p gold_ingot 20 - gives the nearest player who is within a radius of 10 blocks 20 gold bars.

Command block modes

There are three command block modes available: pulse, chain, and repeat - the color of the block changes depending on the mode.

Pulse mode (orange): activates the specified command
Chain mode (green): the command will work if the block is attached to another command block and connects to other command blocks
Repeat mode (blue): The command is repeated every tick as long as the block has power.

Pulse mode
These are ordinary command blocks that are used to interact with chain blocks, but you can simply execute commands in these blocks.

Chain mode
I think it’s already clear from the name that this command block mode works according to the “chain” scheme.

Please note that for the chain type to work, you need a command block with a pulse, which will send the signal, as well as a red stone block, without which the command block with the chain type will not work.

Team title and its parameters:

title clear - clears messages from the player's screen.
title reset - clears messages from the player screen and resets options.
title title - the title that shows the text on the screen.
title subtitle - a subtitle that is displayed when the title appears.
title actionbar - displays a caption above the inventory.
title times - appearance, delay and disappearance of text. The default values are: 10 (0.5 s), 70 (3.5 s) and 20 (1 s).

Example of command execution:

title @a title §6Start - title with orange color.
title @a actionbar Hello! - displays text above the inventory.
title @a subtitle Chapter 1 - subtitle.

Warning

Methods

The first method of obtaining a command block is that you can create a map in creative mode. The Command Block will be available for purchase among other items.

Application

So, let's say you figured out how to give yourself a command block, and it's in your inventory. Now let's learn how to use it.

Teams

First the command itself is written. Any function that can be activated using the console can be written here.
Then the “area of application” is set. That is, the player to whom the effect or coordinates of the appearance of the item will be applied.
And finally, additional arguments that allow you to clarify the characteristics of the object.

In general, the command will look like this.

/[command] [player nickname or coordinates] [parameters]

To make it clearer, let's give some real examples. Let's start with how to issue items with a command block.

/give @p iron_ingot 30

Using this instruction, the command block will give the nearest player within a radius of 10 blocks iron ingots - 30 pieces. Now let's see how to work with coordinates.

/spawn 10 20 30 /summon EnderDragon

Many of the features that are present in the game are achieved only with the help of commands, so we have prepared a list of commands in Minecraft for you. Most of them only work in multiplayer mode and for admins, but some of them are also suitable for single player play. Don't forget that you should enter commands in the chat window, which can be called up with the T or / key.

Click to go:

Commands for solo play in Minecraft:

me<сообщение> - Displays the entered message on behalf of a third party: "Player_name message text." For example: "Player explores a cave."

tell<игрок> <сообщение>,w<игрок> <сообщение> - Sending a private message to another player. Useful if you want to prevent other players on the server from seeing the contents of the message.

kill- Allows you to kill your character, useful if you get stuck in textures. After using the command, the message "Ouch. That look like it hurt." is displayed in chat.

seed- Allows you to find out the grain of the world in which you are located.

Commands for admin in Minecraft:

clear<цель>[object number] [additional data]- Clears the specified player's inventory of all items or specific IDs.

debug - Starts debug mode or stops it.

defaultgamemode - Allows you to change the default mode for new players on the server.

difficulty<0|1|2|3> - Changes the difficulty of the game, 0 - peaceful, 1 - easy, 2 - normal, 3 - difficult.

enchant<цель>[level] - Enchant an item in your hands to the level specified in the command.

gamemode [target]- Changes the game mode for the specified player. Survival (survival, s or 0), Creativity (creative, c or 1), Adventure (adventure, a or 2). For the command to work, the player must be online.

gamerule<правило>[meaning] - Allows you to change a few basic rules. The value must be true or false.

Rules:

doFireTick - if false, stops the spread of fire.
doMobLoot - if false, mobs do not drop drops.
doMobSpawning - if false, prohibits mob spawning.
doTileDrops - if false, objects will not drop from destructible blocks.
keepInventory - if true, after death the player does not lose the contents of his inventory.
mobGriefing - if false, mobs cannot destroy blocks (creeper explosions do not spoil the landscape).
commandBlockOutput - if false, the command block does not output anything to the chat when commands are executed.

give<цель> <номер объекта>[quantity] [additional information]- Gives the player an item specified by block ID.

help [page | team] ? [page | team] - Lists all available console commands.

publish- Provides access to the world via a local network.

say<сообщение> - Shows a pink message to all players.

spawnpoint [target] [x] [y] [z]- Allows you to set the spawn point for the player at the specified coordinates. If coordinates were not specified, the spawn point will be your current position.

time set<число|day|night> - Allows you to change the time of day. Time can be specified as a numeric value, where 0 is dawn, 6000 is noon, 12000 is sunset and 18000 is midnight.

time add<число> - Adds the specified amount of time to the current one.

toggledownfall- Allows you to enable or disable precipitation.

tp<цель1> <цель2>,tp<цель> - Makes it possible to teleport a player specified by name to another or to the entered coordinates.

weather<время> - Allows you to change the weather for a specific time specified in seconds.

xp<количество> <цель> - Gives the specified amount of experience to a specific player, from 0 to 5000. If L is entered after the number, the specified number of levels will be added. In addition, levels can be lowered, for example -10L will reduce the player's level by 10.

ban<игрок>[cause]- Allows you to block a player’s access to the server by nickname.

ban-ip - Allows you to block a player’s access to the server by IP address.

pardon<никнейм> - Allows you to unblock the specified player from accessing the server.

pardon-ip - Removes the specified IP address from the blacklist.

banlist - Allows you to see a list of all players blocked on the server.

op<цель> - Gives the specified player operator privileges.

deop<цель> - Removes operator privileges from the player.

kick<цель>[reason] - Kicks the specified player from the server.

list- Displays a list of all players online.

save-all- Forcefully saves all changes to the server.

save-on Allows the server to make automatic saves.

save-off- Prevents the server from performing automatic saving.

stop- Shuts down the server.

whitelist list- Displays a list of players in the whitelist.

whitelist <никнейм> - Adds or removes a player to the whitelist.

whitelist - Enables or disables the use of a whitelist on the server.

whitelist reload- Reloads the whitelist, that is, updates it in accordance with the white-list.txt file (can be used when white-list.txt is modified manually).

/region claim<имя региона> - Saves the selected area as a region with the specified name.

//hpos1- Sets the first point according to your current coordinates.

//hpos2- Sets a second point according to your current coordinates.

/region addowner<регион> <ник1> <ник2> - Adds the specified players to the owners of the region. Owners have the same capabilities as the region creator.

/region addmember<регион> <ник1> <ник2> - Adds the specified players to the members of the region. Participants have limited options.

/region removeowner<регион> <ник1> <ник2> - Remove the specified players from the region owners.

/region removemember<регион> <ник1> <ник2> - Remove the specified players from the region's membership.

//expand<длина> <направление> - Expands the region in a given direction. For example: //expand 5 up - will expand the selection up 5 cubes. Acceptable directions: up, down, me.

//contract<длина> <направление> - Will reduce the region in a given direction. For example: //contract 5 up - will reduce the selection by 5 cubes from bottom to top. Acceptable directions: up, down, me.

/region flag<регион> <флаг> <значение> - You can set a flag for the region if you have sufficient access.

Possible flags:

pvp - is PvP allowed in the region?
use - is it permissible to use mechanisms, doors
chest-access - whether the use of chests is allowed
l ava-flow - is lava flowing acceptable?
water-flow - is water spreading acceptable?
lighter - is it acceptable to use a lighter?

Values:

allow - enabled
deny - disabled
none - the same flag as not in the private zone

Commands for the WorldEdit plugin

Selecting the active area on which we will work using WorldEdit occurs as follows:

You can simplify actions with regions using .

//pos1- Sets the block you are standing on as the first coordinate point.

//pos2- Sets the block you are standing on as the second coordinate point.

//hpos1- Sets the block you are looking at as the first coordinate point.

//hpos2- Sets the block you are looking at as the second coordinate point.

//wand- Gives you a wooden axe, by left-clicking on the block with this ax you will set the first point, and by right-clicking the second.

//replace - replaces all selected blocks with those specified in the selected region. For example: //replace dirt glass - will replace all dirt with glass in the selected area.

//overlay - Cover the region with the specified block. For example: //overlay grass - will cover the region with grass.

//set - Fill the empty area with the specified block. For example: //set 0 - Removes all blocks in the region (fills with air).

//move - Move blocks in the region by<количество>, V<направлении>and replace the remaining blocks with .

//walls - Creates walls from<материал>in the selected region.

//sel- Removes the current selection.

//sphere - Creates a sphere from , with radius . Raised can be yes or no, if yes, then the center of the sphere will move up by its radius.

//hsphere - Creates an empty sphere with the specified parameters.

//cyl - Creates a cylinder from , with radius and height .

//hcyl - Creates an empty cylinder with the specified parameters.

//forestgen - Creates a forest area x blocks, with type and density , density ranges from 0 to 100.

//undo- Cancels the specified number of your actions.

//redo- Restores the specified number of actions you canceled.

//sel - Allows you to select the shape of the selected region. cuboid - selects a parallelepiped. extend - same as cuboid, but by setting the second point you extend the region without losing the selection from the already selected one. poly - selects only in the plane. cyl - cylinder. sphere - sphere. ellipsoid - ellipsoid (capsule).

//desel- Removes selection.

//contract - Decrease by the specified amount region in the selected direction (north, east, south, west, up, down), if a number is specified - then in the opposite direction.

//expand - Will increase the region by the specified number of blocks in the specified direction (north, east, south, west, up, down), if the reverse-amount number is specified - then in the opposite direction.

//inset [-hv] - Narrows the selected region in each direction.

//outset [-hv] - Expands the selected region in each direction.

//size- Shows the number of blocks in the selected region.

//regen- Regenerates the selected region.

//copy- Copies the contents of the region.

//cut- Cuts out the contents of the region.

//paste- Pastes the contents of the copied region.

//rotate - Rotates the contents of the copied region by the specified number of degrees .

//flip- Will reflect the region in the buffer in the direction of dir, or in the direction of your view.

//pumpkins- Creates a pumpkin field with the specified size.

//hpyramid- Creates an empty pyramid from a block, with size .

//pyramid - Creates a pyramid from a block with size .

//drain - Remove water at the specified distance from you .

//fixwater - Corrects the water level at a specified distance from you .

//fixlava - Corrects the level of lava at the specified distance from you .

//snow - Covers the area with snow at the specified distance from you .

//thaw - Removes snow at a specified distance from you .

//butcher [-a]- Kills all hostile mobs at a specified distance from you . Using [-a] will also kill friendly mobs.

// - Gives you a super pickaxe for quickly destroying blocks.

Seal

Also interesting:

How to return a laptop to a store - can it be returned?

Year the first integrated circuit made on a silicon wafer went on sale Year the integrated circuit went on sale

Programming AVR microcontrollers for beginners

We recommend reading:

2023-11-25 00:08:15

Thermal parameters of the reactor, fuel assemblies and fuel rods

2023-11-25 00:08:15

"VBA Algorithm Development

2023-11-25 00:08:15

Interesting facts about computer virus

Continuing the topic:

Networks

Nosov Nikolay Nikolaevich

Ninochka’s mother went to work every day, and Ninochka’s grandmother stayed with her. She taught Ninochka how to dress, and wash, and fasten the buttons on her bra, and her shoes...