How to remove applications from startup in Windows 7. Editing startup programs. System startup folder

Sometimes a situation arises when you need to disable autorun of some programs in Windows 7 in order to reduce significant resource consumption and speed up the computer, namely Reduce system boot time when turned on.

The fact is that some programs, after installation, set themselves to autostart when you turn on the computer.

Now we will look at several ways to disable autorun of programs that you do not need.

But be careful, because some programs are necessary for the system to operate and are utility programs. Disabling them may affect some functionality of the Windows 7 operating system and its security.

We remove programs from the startup folder through the start menu

This method may already be familiar to you; if you have been using a computer for a long time, you could accidentally discover it yourself without any additional information, but for beginners the information may still be new.

Go to the Start menu > All Programs and find the Startup folder.

Everything that is there starts when the computer is turned on. To prevent these programs from running, simply remove them from there.

We use the standard Windows 7 utility - MSConfig

This utility, MSConfig, is already on your computer by default and you don’t need to install it, you just need to run it and use it.

And it’s very simple to launch it:

Open the Start menu again and type msconfig in the search bar.

It will be found immediately, all you have to do is click on its shortcut to launch it.

If for some reason you don’t have a search bar in the Start menu, you can simply press the Win+R key combination and the following window will open:

Enter msconfig there and click OK.

As a result, the msconfig utility should start. It looks like this:

Go directly to the Startup tab. By unchecking the boxes you will disable unnecessary programs. But if you don’t understand what each of them is responsible for, then it’s better not to disable it.

After you click OK, you will be prompted to restart your computer, but you don't have to.

This utility is very convenient, but it is also not functional enough, because... is not able to provide us with the ability to disable absolutely all (any) programs from startup.

So we'll look at a few more ways.

Manual removal from the Windows 7 registry

Launch the registry editor. To do this, press the usual key combination “Win ​​+ R” or again in the search bar in the “Start” menu we type the words “regedit”.

A very scary, incomprehensible window opens with many folders that look more like gobbledygook than names.

But we are not afraid, but calmly understand everything and gain knowledge!

Among these folders, in the distant wilds, there are two autorun sections of the “seven”:

general (local registry), which is used for all users, the address is:
Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run

personal register - for the current user, at the following address:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

That is you need to go to the Run folder, expanding the folder tree one by one.

They contain files that run along with Windows and you can easily delete them as usual - by right-clicking and selecting “delete”.

You can first go to the first address, clean it there, and then start on the second.

Disabling autorun of programs using third-party software

Now we will talk about the third-party program Autoruns, which is distributed completely free of charge (freeware), but at the same time is very powerful and functional - in just a couple of clicks it can disable absolutely everything that can automatically start when you turn on the computer.

Download Autoruns program You can follow the link from the official website: http://download.sysinternals.com/files/Autoruns.zip(521 KB)

At the office The website has an English version, but we can easily understand it, even without knowledge of this foreign language.

The downloaded archive has a .zip extension and can be unpacked with any archiver.

There are 4 files in the folder. We are interested in “autoruns.exe”, which we launch (it is advisable to right-click on the file icon and select “run as administrator”).

When we first launch, we will be asked to accept the license agreement, which we will do by clicking on the “Agree” button.

The program looks like this:

We immediately see the “Everything” tab, which is a list of absolutely all startup objects.

But in order not to get lost there, there are tabs in which all this is broken down separately: Winlog, Drivers, Explorer, etc.

If you uncheck the box, we will disable autorun. If you click on a line, below you can see a description of the object: the version of the program, where it is located on the computer, size, etc.

In the “Logon” tab there is a list of programs that we could disable using the previous methods described in the article.

You may notice that some lines are highlighted in pink - these are simply objects that do not have a detailed description, and those whose files are deleted and can no longer be loaded, but are simply listed, are marked in yellow. Those. they may not be deleted.

Again, be careful when disabling something you know nothing about. Perhaps this is necessary for the main operation of Windows 7 and after disabling these services, the computer will not work as it should.

For the laziest we provide video tutorial of the whole process:

Autostart of programs is an absolutely necessary function for the normal operation of a computer. With autorun, the operating system independently launches those programs that must run continuously while the computer is running. But, some program developers abuse this function. As a result, many programs that the user does not need at all on a regular basis load automatically and create a constant load on the computer without performing any useful work. In this material you will learn how to disable autorun programs in Windows 7.

There are several ways to disable autorun programs in Windows 7. First, you can open the program's settings and disable the autorun feature. But, unfortunately, not all programs have such functions in the settings. In addition, if you want to disable autorun of several programs at once, then this method will not be very convenient and will take a lot of time. In such cases, you can use the MSCONFIG utility or special programs to disable autorun of programs.

Method No. 1. Disable autorun of the program using its settings.

Open the desired program and go to its settings. Here you need to find the AutoPlay feature and disable it. Let's demonstrate this using the example of the uTorrent program.

Launch the program and open the “Settings” menu. In this menu, select “Program Settings”.

After this, a window with program settings will open in front of you. Find the autorun feature of this program and disable it. In the case of uTorrent, this function is located on the “General” tab.

After setting up the program, close the window by clicking on the “Ok” button to save the changes. That's it, in this simple way we disabled autostart of the uTorrent program in Windows 7.

Method No. 2. Disable autorun using the MSCONFIG utility.

Here you can see a list of programs that start automatically immediately after the Windows 7 operating system starts. To disable their autorun, just uncheck the box next to the program name and save the settings by clicking the “Apply” button.

It should be noted that some programs may not appear in the Startup tab. This happens if they are run as services. To disable autostart of such programs, go to the “Services” tab and check the box next to the “Do not display Microsoft services” option.

After this, you will see all the programs that start automatically as services on your computer. Disabling autorun of such programs is also very simple. To do this, just uncheck the box next to the service name and save the settings.

Method No. 3. Disable startup programs using special programs.

You can also use third-party programs. So one of the most advanced and convenient programs for controlling automatic launch is. After launch, this program scans the operating system and collects data about all programs that start automatically. These programs are divided into groups and displayed in separate tabs in the Autoruns program.

In order to use Autoruns, just uncheck the box next to the desired program. Most automatically downloaded programs are available to the user on the “Logon” tab. In order to disable autostart of services, you need to go to the “Services” tab.

Why is this happening? The answer is simple. Because when installing programs on a computer, the average user presses Further without unchecking the items “Add this program to startup” or "Quick start with Windows". Sometimes patience reaches its limit and you need to do something about it. Let's figure out how to independently and without problems remove unnecessary things from startup in Windows 7, 8 or 10 operating systems.

How to determine: what to remove and what to leave?

Startup is a list in the Windows operating system that allows any program placed in it to start when the computer starts. It would seem like a convenient thing, but when a lot of unnecessary programs accumulate there and every start of the computer turns into a ritual of clearing the control panel of them, it’s no laughing matter. Before you start cleaning, select the programs you want to keep. It is recommended to leave the firewall and antivirus, as well as programs related to the video card, in startup. In addition, you should keep the programs that are necessary for you. You can safely remove other programs; read how to do this below.

Removing unnecessary programs from Windows startup

It is worth noting that there are three main ways to remove unnecessary programs from startup. The first way is through the Windows menu itself, the second is through special software, the third is through the system registry. There is no fundamental difference in performing this operation on Win 7, 8, 8.1 or 10. Everything is done according to approximately the same scenario. We will consider all options.

Disabling using Windows

If you are not eager to download special software or go into the registry to disable unnecessary programs, everything can be done as standard, that is, through the OS. We do the following:

You can also disable some unnecessary services to speed up the system. To do this, in step 4, you need to select the “Services” tab and do the following manipulations:

1. In the window that opens, check the “Do not display Microsoft services” checkbox.
2. Then uncheck all unnecessary services.
3. Click “OK” and restart the computer.

Important! Remove only those programs and services that you are sure do not affect the operation of the OS. If you are not sure about any of them, it is better not to touch them.

Disabling with special programs

There are a huge number of programs that help get rid of unnecessary programs in startup. One of the most convenient and widespread is CCleaner. In addition to cleaning startup programs, it allows you to clean the registry, delete broken files, thereby freeing up disk space, remove any computer software and much more useful things. Specifically, to clean startup we do the following:

1. Download and install CCleaner.
2. Go to the program and go to the “Service” tab, and there to “Startup”;
3. A list appeared in front of us, which presented all the programs from startup. By clicking on the unnecessary one, an active blue “Turn off” button will appear on the left, click it.
4. After turning off all unnecessary programs from startup, close CCleaner. Ready.

Disabling via the system registry

This method is probably suitable for advanced users who understand what they are doing. Since incorrect changes in the system registry can lead to a non-working operating system.

To use the method of disabling unnecessary programs from startup using the registry, you should do everything according to the instructions below.

1. Press the familiar key combination “Win+X” and select “Run” from the list.
2. Enter the command “regedit” in the window that appears.
3. You will have a registry structure. In the tabs on the left, follow one of the following paths:

   HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run;

   HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run.

4. Select the unnecessary program, right-click, select “Delete”, and get rid of them in autorun.
5. Ready. Close the registry.

Important! For fun, don’t just touch anything in the system registry, otherwise the OS may crash.

To summarize what was written above, it should be noted that it is very easy to get rid of unnecessary programs in startup, thereby speeding up your computer. The main thing is to follow our recommendations and you will succeed.

Hello, dear guests and readers of the site! Today we will talk about how to disable autorun programs in Windows 7. I have already raised this topic in the article setting up Windows XP startup, which you will find.

If you have installed many different programs on your computer, then naturally you will need to remove some of them from startup. Firstly, to speed up the startup of Windows 7, and not wait until all programs are launched by the system. Secondly, so that after the system starts, unused programs do not consume computer resources.

Easily remove a program from Windows 7 startup.

A well-known method by which you can remove some programs from Windows 7 startup is the “Startup” folder. Everything that is in this folder is launched automatically by the system. To open this folder, go to the Start menu, then to the All Programs section, where the Startup folder is located. In my case, there is only one program, to remove it, you need to right-click and select “Delete” from the drop-down menu.

However, as I said, not all programs can be removed this way, so we move on to the next method.

How to disable autorun programs in Windows 7 using msconfig?

In order to remove programs from startup, use the Windows 7 utility, to launch which you need to open the start menu and enter “msconfig” in the search bar.

There is another way to launch the utility, by pressing the “Win ​​+ R” keys. After launching the “Run” window, enter the word “msconfig” there.

As a result of these actions, the “System Configuration” window will be launched, in which you need to go to the “Startup” tab.

There you will see the entire list of programs that are registered in the startup section of the Windows 7 registry. In this list, select the programs to disable, leave only those that are necessary, and uncheck the rest. In my example, you can disable only one item, the rest of the necessary drivers for Windows 7. Click “Ok”.

How to disable autorun programs by manually editing the Windows 7 registry?

This method is more complicated, so be careful :). In order to edit the Windows registry, you need to press the key combination “Win ​​+ R” and enter the word “Regedit” in the window that opens.

As a result, a registry editor window will open, in which you need to go to the startup section. To do this you need to go to:

"Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run"

Find a program that starts automatically when Windows starts, uninstall it by right-clicking and selecting “Uninstall.” In this example, there are no programs to uninstall.

How to disable autorun of programs using Autoruns?

Now let's look at the best way to disable programs from startup. This is a free Autoruns program, which you can find by going to the official website at: technet.microsoft.com

The program is very small, only about 600kb. However, it is capable of finding all kinds of places from which something can be launched. The program does not require installation, so we just run it.

We don’t touch the top part of the program, because all these tabs are located in order in the middle part of the program, just below.

In this area, you can find an unnecessary program, then simply uncheck it, thereby disabling it from the Windows 7 startup list.

Some lines are marked in yellow; these are programs that have already been removed from startup. Programs from an unknown manufacturer are marked in pink, which worries Autoruns.

That's all for me on the topic of how to disable autorun programs in Windows 7? I would be glad if you share your experience in disabling autorun programs in the comments.

Good luck everyone! See you again on the pages of my blog.

As usual, there is a video at the end of the article.

The main goal of the development of operating systems is not only to increase the maximum performance of hardware, but also to simplify the operation of the system itself. Whether it's a desktop PC, tablet or smartphone, it's important that apps and programs run smoothly and don't take up the user's precious time. Thanks to the deep integration of hybrid operating systems, the differences between platforms began to decrease, and the operating systems themselves became more unified.

The most widely used Windows operating system often suffers from the fact that the number of programs activated by the system at autostart is filled with various “junk”. This “junk” eats up RAM and processor resources without hesitation. What slows down the operation of the entire system for the user is not only the turn-on time increases. In this article we will look at the procedure for disabling unnecessary applications or programs from Autorun/Startup on Windows 7 and Windows 8.

How to disable autorun of unnecessary applications using Windows 7/8 utilities and methods

How to disable autorun of disk and flash media using the Group Policy Editor in Windows 7

• Bring up the Run dialog box again and enter the gpedit.msc command. Now you need to press the “Enter” key to open the Group Policy Editor. Now in the Group Policy Editor you need to go to the following address: Computer Configuration> Administrative Templates> Windows Components> Startup Policies.

• Double pressing the key on the “Turn off autorun” option will allow us to begin setting up the parameters. In the new window, select the “Enabled” option, then select “all devices” and confirm by pressing the “Ok” key.

After all the steps taken, all that remains is to reboot the system. The autorun and startup feature is disabled for all third-party applications and services that are not part of the operating system. Also, disks and USB modules will be disabled from startup. Now they need to be launched and opened manually. Let's hope that these simple tips will help you save valuable time, because your OS will breathe more freely and applications will launch more quickly.