Is it possible to set the computer to a shutdown timer? Computer shutdown timer. Wise Auto Shutdown Timer

Many users of home computer systems and office workers are well aware that sometimes it is necessary to use a computer shutdown timer. We will further consider Windows 7 as an example, although in all other modifications of this operating system the actions are completely similar.

But what is this for? There are a lot of situations that can be cited. For example, a person watches a movie on the computer in the evening, but realizes that he can fall asleep and the computer will remain on. An office worker, in order to avoid access to the terminal while he is away, may forget to put the system into sleep mode. Thus, it is necessary to decide in advance the question of how to set the computer shutdown timer (Windows 7). There are several simple ways to carry out this procedure, which will be discussed below.

How to Set a Computer Shutdown Timer (Windows 7): Basic Methods

The methodology behind setting a preferred amount of time before the computer shuts down on its own is quite simple.

As in any other system, in Windows 7, turning off the computer using a timer can be done either using the built-in tools of the system itself, or using special third-party programs. Very often you can find not even full-fledged applications, but so-called widgets that are installed on the “Desktop” in the same way as is done in mobile devices.

As the most commonly used tools in Windows 7, shutting down your computer using a timer can be done either from the command line or from the Run menu. Both methods are almost identical to each other, the only difference is in the commands entered, although they can equally be used both ways.

Set the computer shutdown timer (Windows 7) from the command line

First, let's look at the actions with the command line, called through the execution console (Win + R) by entering the cmd combination. Note that in this case it is not necessary to run it with administrator rights, since the enable or disable commands used work at the user level as well.

After calling a command console window reminiscent of old DOS systems, here you need to enter the line shutdown /s /t XXXX (or -s -t), where XXXX is an arbitrary time interval value expressed in seconds (for example, for one hour it is 3,600 ). After this, the enter key is pressed, and a message appears on the screen indicating the period after which the computer will shut down and the final shutdown time.

Setting shutdown in the Run console

Basically, to avoid using the command console, the computer shutdown timer (Windows 7) can be activated directly from the Run menu, which looks much simpler.

After calling the menu, you need to write in it a line similar to the first example, but using other attributes: shutdown -s -f -t XXXX. Please note that while execution attributes can be written on the command line without spaces, here they are required.

In both examples, the “-f” attribute does not have to be used, but its use will allow the system to be shut down forcibly if any programs freeze.

Using the Task Scheduler

In Windows 7, you can also set the computer to turn off using a timer using the so-called “Task Scheduler,” which can be called up through the administration section in the computer properties or “Control Panel” or found through the search engine of the main “Start” menu. This program is standard and is present in absolutely all modifications of Windows systems:

• In the editor, you should use the "Scheduler" library section located on the left, and on the right in the action menu - create a simple task.
• Next, in the name field you need to enter the desired name of the task (for example, “Shutdown”).
• Then (which is very important) indicate the execution mode (once, daily, etc.).
• After this, the continue button is pressed, in the programs and scripts section, the shutdown command is selected with the browse button or the shutdown command is entered manually, and the above attributes are written in the add arguments field (-s -f or /s/t/XX, where XX is the time period, again, expressed in seconds).
• Then all you have to do is click the continue button and “Done” again.

Quickly disable the timer

Now a few words about how to disable the computer shutdown timer (Windows 7). Based on the described methods of activating it, you can accordingly use two methods of disabling it:

1. The first method, if you were using the Command Prompt or Run Console, is to call them again and issue the command “shutdown /a” for the Command Prompt or “shutdown -a” for the Run Console without the quotes.
2. In the same way, the question of how to disable the computer shutdown timer (Windows 7) can be easily resolved in the “Task Scheduler” itself. In this case, all actions boil down to finding the created task in the library section in the middle column and deleting it through the corresponding line in the RMB menu.

The most popular programs and widgets for setting a timer

However, many users may find the above methods too complicated, and some do not like to delve into Windows settings at all. In this case, some third-party utility can be used, generally referred to as the “Computer Shutdown Timer” program (Windows 7).

You can find a lot of such utilities, they all have a minimal size and, as a rule, do not require installation. But after launch, widgets appear on the “Desktop”, and applications constantly “hang” in the system tray. Actually, that’s why access to their settings is carried out differently.

• PowerOff is a small utility with settings for specific times of shutdown, sleep, reboot, etc.;
• TimePC is a program that allows you not only to set a shutdown, but also to put the computer into hibernation mode and wake the system from it according to specified time parameters;
• AutoShutdown - “Computer shutdown timer” widget (gadget) (Windows 7) with capabilities similar to the first two utilities, but always present on the “Desktop”;
• Ultimate Shutdown and PC Autos are simple gadgets for controlling PC operating modes.

Conclusion

As you can see, in Windows 7, turning off the computer by timer can be activated in several ways. Which of these should you prefer? It seems that the most logical solution is to use the system’s tools and tools, although third-party widgets can also be a simple solution. It’s just who you like.

However, in the case of the “Scheduler”, the decision to activate the timer looks somewhat more complicated. In addition, special attention should be paid to its operation modes. It is clear that when setting daily operation, when a person forgets about the installed settings, the computer will turn off at a strictly defined time, and the user will begin to puzzle over why this is happening.

But disabling it in the form of the described commands for the command line and execution console allows you to cancel shutdown not only by timer, but also by standard procedure. True, to use this method, a person must have a good reaction and have a prepared means of quick access to commands at hand.

But, by and large, even in multimedia players, after watching a movie or listening to a music album, you can set the action to turn off the system by setting the appropriate action in the settings.

Turning your computer on and off using a timer is a useful function. Thanks to them, you can use your PC as an alarm clock or have it turn on automatically shortly before you arrive home. In the evenings, you don’t have to wait for the download of a large file to finish. The computer will turn off on its own. Convenient, right?

You can set up a timer to turn your PC on and off using Windows 7 in 5 minutes. Now we will deal with it, and also consider several third-party programs designed for this.

Creating a timer via Task Scheduler

Setting up a power plan

Before you can create a timer, you must allow the system to wake up on a schedule. The feature is enabled in the power plan settings. By default it is disabled.

• Launch Control Panel and click “Power Options”.

• Select your plan and click the “Set up power plan” button.

• Next, click “Change advanced power settings.”

• Select “Sleep” – “Allow wake timers” from the list of options and set them to “Enable”. If you are creating a timer on a laptop, be aware that it may turn on while in the case and suffer from overheating.

Create a computer shutdown timer

• Launch Task Scheduler through the “Start” menu – All Programs – “Accessories” and “System Tools”. Or just type the word “scheduler” into the search bar in Start.

• In the “Actions” column of the Scheduler, click “Create a simple task.”

• First you need to give the task a name. Let's call it “Turning off the computer.” In the “Description” field, you can write a few words about the new task, but you can leave it empty. After that, click “Next”.

• Next, we create a task trigger – repetition frequency. Let's select “Daily”.

• We will set a date and time for the task to begin.

• In the “Action” section, select “Run program”.

• In the next window, select what we will launch: write in the “Program and script” line: C:Windowssystem32shutdown.exe, and in the “Add arguments” field enter the key -s. Click “Next” and “Finish”. The task has been created, all that remains is to check how the computer turns off.

Create a computer turn-on timer

• We launch the Task Scheduler again, but now select the “Create task” item in the “Actions” list.
• On the “General” tab, give the task a name – let it be “Turning on the computer” and write a description (optional). In the “Configure for” drop-down list, select Windows 7.

• On the next tab – “Triggers”, click the “Create” button. We configure the task execution schedule, mark “Enabled” and click OK.

• Let's move on to “Actions”. Here you need to select a program, script or other action to be performed. If you are creating a timer as an alarm, select a music file. In our example, we will create a message that will be displayed on the screen when the computer turns on.

• On the “Conditions” tab, check “Wake up the computer to perform a task.” Here it is advisable to leave active the “Start when powered from the mains” and “Stop when switching to battery power” items – this will protect the laptop from accidental overheating.

• On the “Parameters” tab, you can set additional conditions for executing the task. That's all. Now it is advisable to check how the created task functions: send the computer to sleep or hibernate and wait for it to turn on according to the timer.

Programs for turning on and off your computer under Windows 7

For those who are lazy and do not want to bother working with the Scheduler, there are many programs with similar functions - turning the PC on and off according to a schedule. Here are some of them:

• sleep timer(OffTimer) is a simple free application that requires installation. To set up a schedule, in a single small window you need to set the desired time and press the arrow button. There is no function to turn on the PC here.

• TimePC- a program with the function of turning the PC on and off, has a built-in scheduler, which is not similar to the Windows 7 Task Scheduler. Using TimePC is very easy - just create the desired schedule and select a program or action that will be performed when the computer is turned on.

• Power Off A powerful multitasking tool that works without installation. According to the schedule that can be configured in this program, the computer turns on and off.

All these applications are free, compatible with Windows 7 and in Russian.

What to do if the PC does not turn on or does not turn off on a timer

• Make sure you remember to enable wake permission in your power plan settings.
• Check whether the “Task Scheduler” service is running on the PC - press the “Windows” + “R” keys, enter the command in the “Open” field Services.msc. Confirm your entry by clicking OK. In the list of services window that opens, find the one you need and right-click properties to make sure it is working. If it is stopped, turn it on.

• Make sure your account has sufficient permissions to create scheduled tasks. Create a schedule under an administrator account.
• Check whether the created task is still there and whether the conditions for its execution have changed. Launch Task Scheduler, open Scheduler Libraries, find the task and view the data.

• If your PC still won't turn on or off, the Scheduler log may help you determine the reason.

If it is not disabled, all information about the execution of tasks and their errors is recorded there.

Read about different ways to enable the computer shutdown timer, how to configure it and create a shortcut. The development of computer technology does not stand still and is developing at a tremendous pace. What seemed impossible yesterday is already a past stage today. The creation of new computers and mobile devices significantly expands the possibilities of their use every day.

An important link in the chain of expanding possibilities for using computer technology is the development and implementation of new software. Increasing functionality and reducing the size of modern computer devices allow them to be used in all areas of modern life. Computer technologies, together with control elements, significantly simplify the use of various devices and perform important functions for monitoring them. Today it is difficult to imagine any device that does not have computer control elements. Starting from the simplest devices (wristwatch, toaster, gas oven, etc.) to the most complex devices (modern high-speed cars, spacecraft control center, modern electrical networks and power generating stations, etc.), computer elements are used everywhere technologies and programs.

The main objective of this widespread use of electronic technology is to improve the use, management and control of the process for the convenience of the individual consumer. For example, when working at a power plant, computer technology allows you to calculate and select the correct parameters for the successful completion of the task of transmitting electrical energy, protects the system from failures and errors, and also saves significant financial resources.

At the household level, the use of computer technology makes it much easier for the user to manage and control devices. One of the control elements is the reminder function or time control function (timer). It is present in almost all devices, so it is not surprising that modern personal computers have such a function. The time control function (timer) allows you to set shutdown parameters for the system to complete the assigned tasks or after a certain period of time has passed. There may be various situations when the timer function is needed. You may need to leave your desk (an emergency, the end of the work day, it's just late enough to go to bed, etc.), but all the processes on your computer have not yet completed and cannot be stopped from running. For example, an installed anti-virus program performs a full scan of the system for vulnerabilities and threats, the process of transcoding the video stream is in progress, the system is creating a backup copy, uploading or downloading a large amount of data, etc. In this case, you can set a timer for a certain period of time, after which the system will automatically turn off the computer.

Note: Today, a large number of programs have the function of automatically turning off the computer when the task is completed, but not all. Therefore, the time control function may be required in various situations.

If you decide to set up the time control function, then use the suggested methods presented below:

In this guide, we will show you how to configure the shutdown timer using the operating system's capabilities. "Windows". If for some reason you do not want to use standard features "Windows", then there are many third-party programs and applications that you can find on the Internet. These programs have an improved graphical interface and will provide you with additional benefits such as the ability to log out, hibernate, set a precise shutdown time, or close after a period of inactivity. The algorithm of actions for all applications is almost the same and intuitive, so using them should not cause you any additional difficulties.

Set a computer shutdown timer using the command line

This method is universal and is suitable for all versions of the operating system "Windows", starting from version "Windows 7" and ending with the latest version "Windows 10". It involves using the team's capabilities "shutdown", which can automatically turn off the computer after a certain specified time, and can also restart it.

To manually create a sleep timer, open the dialog box "Run". You can use one of the four proposed methods to choose from:

Method 1: Click the button "Start", located on "Taskbars" in the left corner of the desktop and open the main user menu "Windows". In the list of installed programs and applications, using the scroll bar, move the slider down and find the section "Service - Windows", open the submenu and select dialog box "Run".

Method 2: Right click on the button "Start" on "Taskbars" or press the keyboard shortcut together "Windows + X", and in the menu that opens, select the dialog box "Run".

Method 3: Press the button "Search", located on "Taskbars" next to the button "Start". Or open the main user menu "Windows" by pressing the button "Start", using the scroll bar, move the slider down and select a section "Search" Here.

In the search field, start typing your search term "Run" and in the best match line, select the desktop app "Run".

Method 4: Using a keyboard shortcut "Windows + R" call the dialog box "Run" directly. Enter the command in the command line field. Parameter "XXXX" indicates the time in seconds that must pass before the computer automatically turns off. For example, if you want the computer to shut down after 2 hours, the command should look like this "shutdown -s -t 7200". Click the button "OK" or key "Enter" on the keyboard to execute the command.

Immediately after the command is executed, a warning reminder will be displayed on the computer screen "Windows": “Your session will be ended. Job "Windows" will be completed in 120 minutes. Shut down on April 4, 2018 15:07:28". After the specified time has elapsed, all programs will close and the computer will be turned off.

If the shutdown time range is less than ten minutes (600 seconds), a message will be displayed directly on the desktop. For example, when you type in the command line field of a dialog box "Run" team "shutdown -s -t 600", you will see the following message.

If you need to restart your computer after a certain period of time, then in the command line field of the dialog box "Run" enter the command, replacing the parameter in it "-s" on "-r".

Replace parameter "XXXX" for the exact amount of time in seconds after which the system must be rebooted. Click the button "OK" or key "Enter" on the keyboard and run the command. A pop-up reminder in the notification center will tell you the exact time to reboot.

To cancel a scheduled computer shutdown, open the dialog box again. "Run" and enter the command. Click the button "OK" or key "Enter" on the keyboard to run the command.

Upon execution of the command, a warning reminder will pop up in the notification center: “Logout cancelled. The scheduled shutdown has been cancelled.".

Create a shutdown timer shortcut

If you plan to use the shutdown timer regularly, but constantly using the command line option seems inconvenient to you, then you can create a shutdown timer shortcut on your desktop.

Right-click on any empty space on your desktop and from the menu that opens, click "Create", open the submenu and select a section "Label".

In line “Specify the location of the object” window "Create shortcut" Enter the command with the required shutdown timer parameters using the sample described earlier. For example, if you want to create a shortcut to turn off timer after one hour, then enter the command "shutdown -s -t 3600" directly or provide the full path "C:\Windows\System32\shutdown.exe -s -t 3600".

Now the computer shutdown timer shortcut will always be on the desktop of your personal computer. Whenever you need to start the computer shutdown timer, simply double-click on the created shortcut to activate the timer.

To cancel a scheduled computer shutdown, create a shortcut on your desktop for the timer shutdown command using the described shortcut creation algorithm. Or enter in the dialog box "Run" command to cancel the timer.

If you don't want the shortcut to be on your desktop, you can pin it to "Taskbars". Right-click on it and select section from the menu that opens.

Your shortcut icon will be immediately pinned to "Taskbars", and you can simply remove the shortcut on your desktop by pressing the key "Delete" on the keyboard or by selecting the section in the menu.

Additionally, to be able to quickly distinguish your sleep timer shortcut from others on your desktop or in "Taskbars", select the appropriate icon for it. Right-click on the shortcut and select section from the menu that opens.

Go to the tab "Label" and press the button "Change icon...".

In the window "Change icon" Select the computer shutdown timer icon option that suits you from the list provided. Or you can suggest your own version of the icon via the button "Review…".

Click the buttons "Apply" And "OK" and save the changes you made to the shortcut properties. The computer shutdown timer shortcut will automatically change to the selected icon option.

Set a computer shutdown timer using Windows Task Scheduler

This is the second possible method to set the computer shutdown timer using the capabilities of standard applications "Windows". Open dialog box "Run" one of the methods we described earlier (for example, call it directly using the keyboard shortcut together "Windows + R"). Enter in the command line field "taskschd.msc", press the button "OK" or "Enter" on your keyboard and launch Task Scheduler "Windows".

In the planner window in the area "Actions" select item “Create a simple task...”.

In the window that opens, in the required field, enter any task name that suits you (for example, in our case we chose the name "shutdown3600") and press the button "Further" to continue.

Next, from the proposed task launch options, select the one you need, depending on what task you are solving. For the computer shutdown timer, select the cell "One time" and press the button "Further".

At the next stage, specify the parameters for starting the task: the date and exact time of shutdown, and then click the button "Further".

Select an action for a task by checking the box "Run the program" and press the button "Further".

On the page "Running the program" enter strings in the field "Program or script" team "shutdown", and in the line "Add arguments (optional):" specify the parameter "-s". Confirm your data entry with the button "Further".

On the page "Summary" check all the parameters you entered and click the button "Ready" to complete the job creation process. And at the date and time settings you set, your computer will automatically turn off.

Now you know the standard ways to set a computer shutdown timer, offered by built-in operating system applications "Windows", and you can always use them if necessary.

Hello dear friends of the blog site!

Today I’ll show you a fairly well-known way to set a timer to turn off your computer using the “Run” dialog box + a small value of a few characters. The main thing is that you don’t need to download anything at all!

Quite often we use our desktop computer or laptop to watch movies, especially if this happens in the evening on the couch, then there is a high probability of falling asleep.

And to prevent the PC from working in vain, it would be nice to set it on a sleep timer, but not everyone knows how to do this; it’s possible, so they install third-party software to turn it off.

The Windows shell already has its own shutdown timer built in, which does an excellent job of its assigned duties. I am not a supporter of using programs from other resources when there are systems that work well for these purposes.

I already touched on this topic in an article once and today I want to make a small useful addition to it.

This tutorial is applicable to any version of Windows OS, but the demonstration is provided using Windows 10 as an example. See what needs to be done.

Setting a timer to turn off the computer

Using the Win + R hotkeys, launch the “Run” command
In the open field, enter this value:

Where 7200 means after what period of time in seconds the shutdown will occur (2 hours). It is clear that you can enter your own interval that suits you.

Afterwards, you need to press the OK button to confirm your actions to start the time countdown.

A black window will immediately appear warning you how long in minutes Windows will shut down.

Just before your session ends, you will see a blue alert.

How to cancel your Windows computer's shutdown timer

If you suddenly change your mind or want to change the time, then this easily implements the cancellation value:

After you press OK, a message appears informing you that the scheduled shutdown is cancelled.

The only drawback of this method is that you need to constantly program each shutdown separately. Therefore, for those who are interested in more advanced settings, use the basic “Task Scheduler” program; I gave a link to the article at the beginning of this post, where you will find other methods on this topic. That's all for me today.

Watch an interesting video!

Hi all!

How to put shutdown timer for computer without using any additional programs? Well, are you interested?

Let's put aside unnecessary words and get down to business right away!

I think that you understand the very essence of the usefulness of this feature! For example, I understood!

Every time before going to bed I watch a movie... And when my eyes close, I have no desire to get up and turn everything off!

And now everything is simple: calculate the time, set the timer ( possible with a small margin) and that's it! If you suddenly fall asleep, the computer will no longer work until the morning!

So, we need the command line " Execute...«!

A quick way to call is the Win+R key combination.

P.S. Win (or Windows) is a button on the keyboard with a window-like icon.

You can also call this command via “ Start - All Programs - Accessories - Run…«.

Hotkeys and similar features via “ Start“Judging from sources, they work on Windows 7 and Vista. But I actually have eight - everything worked ( if anything, then I'm talking about Win+R)!

I don’t know for sure about XP, if anything, go to “ Start«!

Everything should be roughly like this:

The command is immediately located in the menu “ Start«!

In Windows 7 and Vista it is also possible to drag a line into an accessible place in the menu " Start“... But let’s not complicate everything!

I hope that everything worked out for you and that this window appears in front of you:

We enter incomprehensible letters and signs into the line:

shutdown /s -t ...

Instead of dots, we write the time we need in seconds!

Eg, 30 minutes-1800 seconds, 1 hour-3600 seconds, 2 hours-7200 seconds. etc…

Something like this:

I prescribed 10 seconds, that’s exactly what I did the first time and I advise you! Try it first!

When writing code, keep the spaces and when finished, press Enter, or the "" button. OK«!

After the countdown, the computer will shut down!

And further! You don't need to enter the command every time, because after the next opening it will already be there!

Well, that is if you don’t use the command line for any other purposes...

Nevertheless, there is salvation for this option too! Click on the small arrow in the field and the last commands we used will open to us:

And it doesn’t matter whether the computer turned off or not! They will remain there until you or the system somehow removes them!

That's it, the lesson is over!

How to set a sleep timer on a computer?
1. Open " Start«.
2. Execute...( or Win+R).
3. Write: shutdown /s -t ... ( Instead of dots, write the required number of seconds)
4. 30 minutes-1800 seconds, 1 hour-3600 seconds, 2 hours-7200 seconds...

And to restart the computer at a specified time, you can use the command:

shutdown -r -t ...

This command also allows you to put the computer into hibernation mode.

Hibernation Mode- this is a mode of reduced power consumption,designed primarily for laptops. When you enter sleep mode, all open documents and settings are saved in memory and the computer enters a low-power mode, and when you enter hibernation mode, all open documents and programs are saved on your hard drive in the file hiberfil.sys, and then the computer turns off. Of all the power-saving modes used in Windows, Hibernate mode requires the least amount of power. If you do not plan to use the computer for a long period of time and there is no way to recharge the battery, it is recommended to put the laptop into hibernation mode.

Do not confuse with sleep mode!

Sleep mode- This is a low power consumption mode that allows you to quickly resume operation in normal power consumption mode (usually within a few seconds) upon user request. Putting your computer into sleep mode is similar to pressing the Pause button on a DVD player: the computer immediately stops all operations and is ready to continue working at any time.

Hybrid sleep mode- this is the mode that designed primarily for desktop computers. Hybrid sleep mode combines sleep mode and hibernation mode because all open documents and programs are stored in memory and on the hard drive and the computer is put into a low-power mode. If Hybrid Sleep is enabled, entering Sleep mode automatically puts the computer into Hybrid Sleep mode. On desktop computers, hybrid sleep is usually enabled by default.

As in normal sleep mode, during hybrid sleep the computer should not be de-energized. In the event of an unexpected power failure, the Windows operating system can restore data from the disk, but such recovery is not standard and is usually accompanied by intense load on the hard drive - do not abuse it.

And now some news... My blog was recently finally awarded Titz 10!

There were no special efforts to increase this indicator! I started a couple of times: downloaded the database, a couple of registrations and that’s it - no patience and no time!

And it got to the point where I wanted to go pay the money... And here was such a gift!

In fact, Titz has no use for me! But it’s nice to receive such a reward for your work! Maybe search engines will now show a little more respect...

Judging by the service pr-cy.ru, which partially takes statistics from linkpad.ru- 60 sites link to me!

P.S. Have you read the article about how I got +1 to Pr?

That's how things are!