How to sew an original phone case. DIY phone case made of fabric for different models How to make a phone case from cardboard with your own hands

Mobile phones have become so firmly established in our lives that they have become not just a means of communication, but also an element of our image. Many people like to decorate their mobile devices by choosing interesting cases for them. But it’s much more interesting if the case is not bought in a store, but created with your own hands. This way it is easy to achieve its individuality and uniqueness.

Making a phone case with your own hands is not difficult. It is only important to choose the option that you like best and determine what material the future case will be made of. Craftsmen offer original crafts made of silicone, leather, suede using rhinestones, buttons, spikes, painting and other interesting solutions.

Do-it-yourself swing covers

Hinged covers are very popular today. To make them, you must first purchase the necessary materials. Required:

• fabric or a small piece of leather of the desired color;
• plastic or plastic paper folder;
• metal plate - ideal option is corrugated board;
• high quality glue.

The work will require scissors, thread, a ruler and a marker, and it is also advisable to have a sewing machine. If you don't have a sewing machine, the stitches can be done by hand.

The process of creating a trendy and unique case is as follows:

1. We take measurements from our own phone, for which we plan to update it. It is advisable that the mobile device is always at hand - this will allow the case to be adjusted in a timely manner during work.
2. A frame is created from plastic in accordance with the measurements of the phone. To do this, it is best to wrap the device in plastic to draw the boundaries as accurately as possible. Carefully cut out the frame with thin scissors. You immediately need to cut holes in the locations of the camera, speaker, holes for headphones - for each model of mobile device they can be located in different places, so there are no universal tips in this regard.
3. We also cut out a sheet from the metal plate in accordance with the size of the phone. To do this, the device is applied to the corrugated sheet with its front side and the contours are accurately traced.
4. Four squares of fabric or leather are cut according to the dimensions of the corrugated sheet. Two pieces will serve as the back wall of the case, the remaining two will create a plate that will cover the screen.
5. Two pieces of leather are sewn on three sides. A metal plate is placed in the remaining pocket and carefully sewn up on the side.
6. The following pieces of leather or fabric are compressed in the same way, only plastic, previously prepared at the very beginning of the work, is already placed inside.
7. The back and front sides of the case are fastened together using a small rectangular piece of leather or fabric, which should be approximately equal in width to the thickness of the phone. At this stage it is better to use glue.
8. Another element made of fabric in the shape of the phone case is glued to the back - it will hold the device inside the case. It is important not to forget about the holes for the camera and speakers at this stage of work.

The phone case is ready. It is easy to design it at your discretion - choose plain pieces of fabric or make the back and front walls from materials of different colors. After creating the case, you can further decorate it with a pattern, rhinestones, original ribbons and other decorative elements.

Fashionable silicone case

Silicone cases are no less popular these days. A wide variety of such products are available in stores, but the homemade version looks much more interesting. To create it you will need:

• construction silicone;
• potato starch;
• rhinestones, ribbons, decorative elements;
• paints.

Since construction silicone has a negative effect on the skin, you need to work only with high-quality rubber gloves. It is recommended to create a custom case in a ventilated area with a mask on your face. The process consists of several stages:

1. First, prepare the silicone. It is mixed with potato starch until a homogeneous white mass is obtained. The consistency of the mixture should resemble soft plasticine.
2. The phone is wrapped in cling film.
3. The silicone mass is rolled out to form a thin pancake. The thickness of this “pancake” will be the thickness of the future cover, so all processes are carried out by eye, depending on the desired result.
4. We place the phone on the rolled out silicone, press it in a little and wrap the white mass on the sides to obtain the shape of the case.
5. Let the mixture harden.
6. After hardening, we make holes at the location of the buttons, speakers or microphone.

The silicone case can be not only white, but also colored. To do this, in addition to starch, construction silicone must be diluted with a small amount of paint of the desired color. Numerous master classes offer to decorate a silicone case with original applications from the remaining silicone. To do this, cut out the appliqué parts from the remaining material and stick them to the back wall with good glue.

Felt or felt cover

A simple and convenient case in the form of a felt or felt pocket will protect the device from scratches and damage. To make it you will need felt of the desired color, thread, needle and scissors.

We cut out parts from the material according to the size of the phone with a small margin for stitching. There should be two parts. We sew them on three sides with a beautiful stitch. The soft and interesting case is ready.

Depending on the style and imagination, the felt cover can be decorated with a stylish appliqué made from the same material, or some rhinestones or beads can be added.

Such cases with additional pockets are popular, where it is convenient to put a credit card or business card.

Case with a flower arrangement of dry herbs

By creating a delightful case with a flower arrangement from a herbarium, you will definitely surprise those around you. Moreover, the process of creating such a case is not complicated. To work you will need:

• herbarium;
• epoxy resin;
• flat wooden stick;
• cotton swab;
• acetone;
• glitter;
• colorless glue;
• plain cover.

We lay out the herbarium on a plain cover of the color that will be the main one for the composition. The thickness of the composition on the base should not be more than 1.5 mm. Once the floral design is laid out, carefully glue each individual flower to the cover. If desired, the composition can be supplemented with sparkles.

In a separate container, dilute the epoxy resin with water. The proportion should be 1:1. As soon as the solution is ready, pour a small amount of it onto the center of the herbarium base and carefully distribute it with a flat wooden stick over the entire area. We add resin in small quantities so that it forms a thin layer on the herbarium. It is important to distribute it over the entire surface of the base.

To get the final result you will have to wait 2 hours. It is better to carefully monitor the drying process in order to promptly remove smudges of epoxy resin. To do this, use a cotton swab with acetone. All efforts will be rewarded by receiving a stunning, original and bright case with a designer floral arrangement.

Video instruction

We decided to dedicate today's news to handmade lovers. will tell you how to make a phone case with your own hands and show you several interesting options. Take advantage of original ideas and make your device unique!

First of all, you need to decide on the manufacturing method. Today we will consider the following options:

decoration of the finished case;

knitting;

sewing.

The first method is perhaps the simplest and does not require much effort or skill. To create a creative case you will need a base. It could be an old cover that has already seen life and has scratches on it, or it could be a completely new, but boring cover. Don't hold back your imagination! Bring your ideas to life and create a new image for your smartphone.

So, let's start decorating your device. Once you've decided on the base, you need to think carefully about what style you want your case to be. Rhinestones and beads will help you create a bright and unique design. And we will attach them using superglue.

All you need to do is choose decorations for the overlay, calculate how many of them you need - and stick them on the way you want it. For example, a very cute option with turquoise and purple rhinestones. The overlay was simple, but it became... no, not gold, but glamorous!

But here’s an even simpler option for you - . It turns out very quickly and brightly. And this way you can change the color of your case every day!

Well, now let's move on to the second method - let's try a crochet phone case according to the pattern. We suggest you create a case from threads. You can combine any colors and then decorate the finished product with different decorative elements. You can also knit a case for a mobile phone- the choice of knitting method depends on your preferences and skills. In our example, we use a hook and threads of pink and white.

To begin with, you need to cast on 11 air loops with the main color. Then tie the chain on both sides with double crochets. Knit nine double crochets into the outer loops, and one double crochet into the remaining loops. In the next row, work double crochets into each stitch of the previous row (without increasing). Next you should knit according to the pattern below (see image).

Change colors every row. Repeat the fifth and sixth rows in height the required number of times so that the phone fits completely into the case. Starting from the 4th row, knit double crochet fans under the single crochet of the previous row. Upon reaching the required length of the product, knit the three final rows, which are indicated in the diagram (starting from the 14th), with the main color. Tie the cord and thread it through the holes made in the 15th row. The result is a beautiful openwork case.

Another option for the crochet case model is a case with a flap. In the video tutorial you can see how to knit a cover in the shape of a funny Minion. You can use other colors by making your case using the same pattern.

Read - " "

Needle and thread are your friends

The third method will require your skills in the cutting and sewing process. If you have never sewn anything before, here is your chance to try your hand. Try it sew a phone case with your own hands . Suddenly you will like it so much that you will immediately start sewing clothes!

We suggest you make the case in the form of a clutch. You can use any fabric and then decorate the case in different ways. The pattern for the base is shown in the diagram below.

Don't forget to measure your smartphone or tablet to make the case yourself, suitable in size. You can use buttons, snaps or Velcro to secure the flap.

Such a creative case will definitely attract the attention of everyone around you.

Show your imagination, develop your creative abilities - and your gadgets will be bright and creative!

Unusual, bright smartphone cases provide reliable protection for gadgets from damage. The price of a good model is high, so not everyone can buy one. But why pay if you can figure out how to make a phone case yourself?

The case you create will become something that you won’t find in any store. It’s enough to stock up on the necessary tools and use your imagination. And then the smartphone will be protected and decorated to your taste.

Why is it important to make cases with your own hands?

Store attributes for new gadget models are definitely useful, but they are too expensive. But to make them yourself you don’t need any skills or rare materials. Everything you need to decorate a phone case is freely available to everyone.

It is not always possible to find a suitable model in stores. But if you make the case yourself, you can choose the desired color, shape and characteristics. Then it will become a one-of-a-kind accessory.

The advantage of homemade covers is that you can frequently change your look without spending money. The same cannot be said about the purchased model, the price of which on average ranges from 350 to 1,400 rubles. Therefore, the article provides recommendations and 12 instructions for creating and decorating phone cases with your own hands.

The most popular colors for cases

For several years now, accessories with abstract designs in bright colors or imitating wood or metal have been in fashion. Bamboo bumpers are also popular - another name for protection for smartphones among young people. There is no need to decorate them with anything, because they already look good.

Before you make a case with your own hands at home, study master classes for beginners. There can be many homemade accessories for your phone. However, they should all be made in trendy colors and exactly match your image.

Instructions on how to make your own phone case

Use the tips in the article to make a bumper from glue, cardboard, fabric, rhinestones and other materials. The created case will look cool, because your soul will be put into it.

All sketches are clear for beginners. Interesting ideas with step-by-step instructions will help even a beginner to cope with this task effectively.

Cardboard case

To make a cardboard case for a mobile phone, you will need simple materials. The main thing you should not forget about is the openings for the camera, charging, headphones and keyboard (for a push-button phone).

A cardboard case is a short-lived product, even if it is made from the most expensive, durable materials. The video review provides a clear example of how to do everything right:

They start working, starting with the stencil:

1. Take a thick sheet of cardboard and place the phone on it. With a marker, outline its outline with a margin of 0.5 cm (take into account the thickness of the device).
2. Use a utility knife to cut out the template, do not touch the jumper. Draw a curve, pressing the pencil in slightly to make each line.
3. Attach the bumper to your smartphone. And the book itself - with an elastic band or even two to securely fix the phone on both edges.

Such a bumper can be painted brightly, beads, rhinestones and other decorations can be glued onto it.

Paper case

How to make a paper bumper for your phone? There are several ways. All of them are budget. Making such a bumper is easy even for those who are far from home. It will protect your device on a beach holiday from sand, dust and dirt.

Instructions:

• Fold a sheet of A:4 paper in half and place your smartphone on it;
• wrap the gadget in paper so that it is not visible;
• Tuck the top edge and bottom by 1 cm, and the sides with minimal sections;
• Secure all bent parts with glue.

You should end up with a package that the phone can easily fit into from the top. It’s easy to make such improvised paper protection, but it’s temporary, because it doesn’t protect the phone from the consequences of impacts.

There is no need to “rack your brains” over decorating your phone case. Use ready-made images cut out from glossy magazines. Or print out an interesting drawing and stick it on paper.

From yarn for knitting

Many people have several skeins of knitting thread in their home. They can be used to knit a phone case. Prepare your knitting needles or crochet hook, and arm yourself with a pattern from the Internet.

How to knit a case with crochet or knitting? It's easy for those who have this skill:

1. Knit a scarf-shaped cover the width of the gadget with a 1 cm allowance. The knitting can be tight or openwork.
2. Then simply sew the sides and bottom of the piece together.

You can attach a lace on top, stick beads around the perimeter, sew on crocheted flowers - whatever you want within the limits of your imagination.

Made from silicone

It’s easier to buy a ready-made silicone phone case in a store. But why pay more if it’s easy to do it yourself? Before work, prepare the following materials:

• latex gloves;
• 2 tbsp. regular starch;
• sandpaper;
• putty knife;
• construction silicone.

Prepare a gadget template in advance or simply wrap it in paper so as not to damage the device during operation.

Stagesworks:

1. Sprinkle a little starch on the table, add silicone and knead the dough. We recommend doing this with gloves. You should end up with a mass that resembles plasticine in consistency.
2. Roll out the mass as thin as possible. Then wrap the smartphone in it so that all the edges on the sides meet.
3. Seal the edges, just like dumplings are made. Trim off excess.
4. Leave the mixture to harden. Pull the phone out of it, cut all the necessary holes.
5. Use sandpaper to polish it to make the bumper the same thickness in all places. Remove excess with a knife.
6. Using a brush, cover the entire surface of the case with a thin layer of silicone.

Wait until the silicone hardens completely. After that, decorate the bumper to your taste: glitter, rhinestones, beads, paints.

From threads and glue

This instruction is also simple. To protect your phone with a thread case, prepare the following equipment:

• small skein of yarn;
• glue gun;
• scotch;
• parchment;
• ruler.

Let's get started:

1. Wrap the gadget in parchment. Secure the joints and bends on the front side with tape.
2. Make a base on the back of the phone with a glue gun. Don't forget to leave holes (for the camera, charger, microphone).
3. Leave the mixture to harden, then remove the base from the device.
4. Take a ruler and wind some thread on it, taking into account the width of the smartphone.
5. Apply a thin layer of glue to one of its edges and press it to the base. Give it time to dry. Then cut the threads from the opposite edge.
6. Decorate the entire surface of the case with bristles, keeping a distance between rows of approximately 5 mm.

Felt cover

The basis of such protection is dense fabric. To make it, prepare the following equipment:

• felt of any shades;
• a needle with a thread threaded into it;
• glue gun;
• slate pencil;
• ruler or meter;
• scissors.

Instructions:

1. First make a felt blank. Place the gadget on it and trace it along the contour, leaving 1 cm at the edges. You will need two such blanks.
2. Sew the two resulting pieces together using an outside seam. The phone must fit into the case. Therefore, felt should be sewn at a distance of 0.5 cm.

On top you can sew appliqués made of the same material or glue glass beads.

From beads

Beads are popular. Many girls wear jewelry in the form of brooches, bracelets, and earrings made of such small, shiny beads. To make beaded phone cases you will need:

• multi-colored beads;
• glue gun;
• a piece of hard cardboard;
• toothpick.

When the inventory is prepared, let's get to work:

1. Some of the beads need to be poured onto the table. Apply a drop of glue to the cardboard.
2. Take a little glue with a toothpick. Touch the bead and dip it in glue.
3. Stick to the gadget.
4. Using the same method, glue the rest of the beads onto the sides and back cover.
5. You can immediately make an ornament using ready-made stencils, without inventing your own.

As you can see, this is a painstaking task. But everything must be done at a pace, without hesitation, because the glue hardens quickly.

Hot melt adhesive cover

When working with a glue gun, you must be safe. Hot glue can seriously damage your skin. If it gets on the display, it will ruin the gadget. Therefore, we recommend that you be extremely careful.

For work, prepare:

• glue gun;
• parchment;
• matches;
• acrylic paint;
• marker;
• scotch.

Sequence of actions:

1. Prepare your phone. Wrap the gadget tightly on all sides with parchment, especially the back wall. Secure the parchment with tape.
2. Sketch the base. All contours can be outlined with a marker to create an abstract image. The main thing to consider is that each line increases rigidity. Therefore, it will be easier to take into account the absence of voids.
3. Applying glue. Apply the glue along the contour, because it will bear the maximum load. The drawing of the future bumper is to your taste.
4. Leave to harden. Trim off any excess. Cut holes for the camera, speaker and headphones.
5. Remove cobwebs and hairs. Using a heated match, carefully remove all hairs. The case will be the same thickness.
6. Paint the product. You can apply any designs to your phone case using acrylic paint or manicure polish. Glue the decor.

Using hot glue, you can make reliable protection for your smartphone without a pattern. However, then a little more material will be needed. Usually the product is coated with nail polish.

From glitter

This is a very simple recipe, and those who love glitter will love the results. To make a glitter case, you need to prepare:

• multi-colored glitter;
• brush;
• transparent nail polish;
• Polish for hair.

When you have all the materials on hand, start making the case:

1. Spray the back cover of the smartphone with hairspray.
2. Apply glitter with a brush. You need to do the work as quickly as possible, otherwise the varnish will dry out.
3. Secure the work with clear nail polish.
4. Leave to dry.

Case from an old notebook

To quickly make a case for a smartphone, you can use an already unnecessary notepad. To work you will need:

• a notebook the same width as the phone;
• paper knife;
• colored paper;
• glue;
• two thick elastic bands.

Instructions:

1. The inside of the book needs to be rid of notepad sheets.
2. Lay out the cover and cut out the napkin along its contour. Glue it and check if it bends well.
3. Cut a piece of cardboard the size of half a book.
4. Cover the cardboard with a napkin. Secure the top and bottom loops and put them on the gadget to check the tension.
5. Glue thick cardboard with rubber bands to one side of the notepad. Be sure to leave a 1 cm strip.

This smartphone case will protect your phone from damage and provide convenient viewing of videos.

Leather case

We make a leather case with our own hands. To do this, stock up on:

• a piece of leather;
• clamps, scissors;
• thick thread;
• cardboard template;
• pliers for installing eyelets;
• gypsy needles - 2 pcs.;
• ruler, pen;
• decorative elements.

To make a leather case at home, you need:

1. Take measurements of your smartphone. Add 1 cm to the length, 2 cm to the width.
2. Using the measurements, make two leather blanks.
3. The corners of the workpieces are slightly rounded.
4. Make small holes on the cardboard template at a distance of 5 mm.
5. Place the leather blanks together, right sides inward, then attach the cardboard.
6. Using tongs, make holes along the sides and bottom edge. Secure with clamps.
7. Place needles on both sides of the thread.
8. Sew the sides like this: insert one needle into the first hole, straighten the thread. Then take turns sewing with two needles at once, pulling into the same hole, but from different sides.
9. Sew the entire case. Then securely fasten the thread.
10. Make two through holes on the top of the product at a distance of 1 cm.
11. Place aiglets on the ends of the decorative thread. Thread through the holes and tie a bow.

How to make a phone case from rubber bands

There are many interesting designs for covers, but rubber band weaving is especially popular among young people. You will need a multi-colored set of them and a hook for weaving.

We will start from the second pin, having first put rubber bands on it and transferred them to the third pin in the bottom row crosswise. From there, put the elastic bands on the third row at the top, crosswise.

From the bottom row of the pin we put elastic bands on the third row at the top crosswise and on the 4th row, throwing them inside. You should now have three crosses. In the central part, skip 2 pins, braid 4 more crosses in the same way as the first.

Make both crosses and loose pins along the edges. Put the elastic bands back on the next row. In this case, the top row should be opposite to the bottom. In the same way we throw on all the pins in the previous row.

The machine must be thrown horizontally. Without crossing, change the elastic band from the bottom row to the top one. Secure the elastic bands of the top row in exactly the same way, using two pins located in the middle.

The same must be done for the second side. Use a crochet hook to remove 2 elastic bands from each pin at the bottom. And skip the middle ones again, leaving 2 of them on the pins.

The next row can be done in a different color. To do this, you need to remove 2 loops around the circle of the machine, and then put elastic bands of a different color in their place. Then you need to remove the bottom hinges. Alternating two colors of elastic bands, make two more rows in the same way.

To leave a hole for the screen, turn the machine vertically. Remove the bottom elastic bands from the third pin and transfer them to the fourth. The last loop should be on pin 7.

Step-by-step instructions for weaving a case

To weave it correctly you need to perform the following series of actions:

1. Remove the loops from all 5 pins in the middle. There will be 3 occupied places on the sides. The next rows are also bandaged, the procedure is carried out in a circular manner. There are 5 pins left on one side. Similarly, create a hole for the camera, but only remove the loop from 1 pin, and not from five.
2. Remove the bottom elastic bands, leaving only 2 loops. Knit 11 rows in the same way, while not forgetting to change the color of the elastic bands. Knit a row in the round, filling in the pins.
3. Leave the previously unused 5 pins and remove the elastic band from the remaining lower ones. Skip two working pins, remove the lower loops from the third, the loop should be thrown over the adjacent one. Continue this until the last two pegs are free. Also tie up the next row.
4. Continue work on the other side of the machine. Remove the loop from the second peg of the right row and throw it on the next one. The last loop is thrown onto the 4th peg.
5. Remove the bottom loops on the 2nd and 3rd peg, leave them in the center of the 2nd peg, throw the loops in a circle and also remove the bottom ones.
6. The next row - put elastic bands on all the pegs and remove the loops without touching the pins, which contain two elastic bands.
7. On the first peg, swap the upper and lower elastic bands, and then transfer the upper loop to the next peg, connecting the structure.
8. On the next pegs, remove the bottom row of loops and transfer them to the next pegs in the row. Next, knit a regular row.
9. To close the product, you need to make a row of crosses, exactly following the first procedure. But the next row uses opposite pegs to create crosses.
10. Remove the loops from the bottom, leaving only those elastic bands that form figure eights on the pegs. As a result, there will be three elastic bands on the bottom pin. In the same way, transfer the lower loops to the next pins and knit a row.
11. Take 1 elastic band, secure it with a knot on the right and remove the cover. Place all protruding elastic bands inside the product, hide the knot and put the case on the smartphone.

As you can see, this is a very difficult job. If you decide to take it on, we first recommend watching the video instructions:

Several life hacks

For these purposes, many people take already unnecessary jewelry. Bumper decoration can be made from torn decoration elements. For example, an old pendant, a torn necklace. Rivets, paper clips and even damaged children's toys - the only limit is your imagination.

If you have your own original idea for creating reliable and stylish protection for your smartphone, share it in the comments. Perhaps it will be an excellent solution for some of the readers. We wish you inspiration and success in your creative work. We recommend watching a video review of interesting ideas for creating cases:

Today, although the choice is large, the range of phone cases that the market of mobile phones and accessories offers is usually quite monotonous. How you want to not be like others and distinguish yourself with something original! In this case, you can do it yourself. All you need is a little imagination, perseverance, perseverance and the simplest means at hand. Here are some examples of what you can do with your own iPhone case.

This is one of the easiest ways to create an original iPhone case with your own hands. These rivets can be easily ordered online. Moreover, they can be found in any hardware and sewing supply store. They can be attached to a case with a ready-made decoration on it, or you can use your own personal design. In fact, here the imagination is limitless and you can come up with any pattern or ornament that will look good, lined with rivets like this. They can be glued to a hard plastic case or screwed onto a flexible rubber case. But in any case, such rivets look very stylish, solid and fashionable, so you can’t go wrong with them.

Space print always looks very beautiful and somehow even slightly mysterious. Not everyone has the courage to use it in their wardrobe, but there is a wonderful opportunity to use it on such a small but very important detail as an iPhone case. In fact, this is an ideal opportunity to apply it without too much effort and effort. All you need is nail polishes... By the way, we have found a use for old nail polishes that don’t apply well anymore and it’s a pity to throw them away. In addition to them, you will also need an old sponge, which you don’t mind cutting into pieces. Using pieces of sponge, you will need to place multi-colored “stars” on the previously applied sky background. White paint and a very thin brush will also help to “drip” small stars.

One of the easiest ways to create a custom iPhone case is to paint it. To do this, you can use any felt-tip pens, but thin permanent markers are best. Then everything depends on your imagination. Ethnic patterns and prints look very beautiful and stylish. The main thing is to make them bright, using as many colors as possible. But, strictly speaking, you can draw whatever you want.

This charming one is very easy to make. You can use anything and use your imagination to the fullest. Cute beads, old pendants, pendants or other elements of jewelry and other trinkets are simply glued to the iPhone case in any order you like. The perfect way to turn trash lying around the house into something worthwhile.

This is a way to make your iPhone case not only original, but also intellectually filled. You just need to choose an interesting quote (it’s better if it’s your life credo, or you can make it one) and write it on the surface of the case in beautiful handwriting or an original font. After this, decorate the composition thematically by drawing something or gluing the corresponding elements.

If you are a fan of minimalism, this idea is just for you. Draw or glue some kind of logo or symbol onto the case, which will add detail without being too busy. The most popular symbols and signs are the infinity sign, anchor, cross, rainbow, diamond, ankh, etc. Choose what you like, choose the perfect color and try to make it yourself.

This is the perfect way to give a gift to your boyfriend, best friend, sister, brother or other loved one. You need to select the appropriate design and apply it to two cases for iPhones. It is very interesting when they seem complete separately, but at the same time create one overall composition when together. It's both fun and beautiful.

If you like everything shiny and sparkly, then this idea is for you. You don't have to use Swarovski stones, although they will look amazing on your iPhone case. You can use beads. Yes, gluing small beads onto a phone case is not easy, long and tedious, but the result is worth the effort. Moreover, it is not necessary to unstick it all completely. You can make a specific design from beads or stones. The main thing is to use your imagination and choose the right colors.

Here's another idea for those who love sparkling glamor. Again, it is not necessary to cover the entire case with glitter. You can come up with an interesting design or pattern that will sparkle against the main background. Here you will need special glue for the blend and cosmetic glitter. Use a pencil to draw a design that will sparkle (if you decide not to cover the entire case completely), grease this silhouette with glue, and sprinkle glitter on top. Let them dry, shake off the residue so that only the shiny design remains, and cover them with another layer of glue on top. Don't add too much glitter or apply too much glue. If the pattern is very thick, the smooth effect will disappear.

This iPhone case is actually very easy to make. Everyone knows how to splatter paint. Remember this school drawing technique and go ahead and create your own individual and unique case design. It is best to coat the case with a special blending glue before applying the spray so that the paint is guaranteed to adhere and not peel off. Apply paint only after the glue has dried. Choose your favorite colors and go!

Every young lady has a phase of fascination with animal prints in her life. Why not make an iPhone case in the same style? To do this, you will need thin permanent markers (in this case, one is black) and a coloring example. The print can be zebra, tiger, leopard or any other.

The gradient is not that easy to make, but if done correctly, it will look absolutely gorgeous. Take paints, water, a sponge and get to work. You will wash away the paint with water, approaching the place where the next color should begin. A sponge will help you mix colors. Any colors can be used. Before you ruin the case, it's best to practice on paper. When you realize that you have achieved perfection in technology, you can take on the case. Don't forget to use blending glue before applying paint.

These are the simple ideas that will help you create an absolutely original and unique iPhone case that no one else has. Be different from others. Do it yourself!

Today, in the era of high technology and information, it will be quite difficult to find a person who does not use a mobile phone. This phrase is especially relevant for the younger generation.

Nowadays, every specialized communication salon (or household appliances store) is ready to provide customers with a wide range of cases for selling mobile phones. Naturally, the primary task of the case is to protect the device from possible damage (falls, shocks, etc.).

But at the moment, more and more people are purchasing cases in order to make their gadget unique and inimitable. You can, of course, choose a brighter store-bought case, but it won’t be able to give the phone that very “zest.”

The best solution in this case is to decorate the phone case with your own hands.

How to do it?

Decorating your phone case yourself is not such a difficult task as it might seem at first glance.

All you need is good glue and all sorts of different decorations: rhinestones, multi-colored fabric, beads, tape of different colors, leather and the like. In a word, you need everything that can be used to cover (cover, cover, decorate) a phone case.

And yet, let's figure out how to decorate a phone case easier and faster. A selection of photos will clearly show:

For example, a regular plastic or silicone iPhone case can be beautifully painted with permanent markers. You can experiment with colors, patterns and create your own design that no one else has.

If you are too lazy to come up with something and draw something, it will be enough to just choose a sticker to your taste and stick it on the case.

These can be various characters from cartoons and movies, paintings by famous artists, hieroglyphs, ancient writings, runes and much more.

If we consider more complex options, then the case can be completely decorated by gluing various small pebbles, rivets, spikes, buttons, beads, chains, and shiny ribbons onto it.

This method of decorating gives you a great opportunity to use your favorite trinkets that have never been put to use.

If you don’t have suitable materials at hand, you can easily buy rivets at any sewing store.

In addition, there are special stores for creativity, where you can find everything you need and even more. As a last resort, everything can be ordered online.

Various pebbles, rivets, spikes, etc. can be glued to the back wall of the case. You can use them to make a beautiful ornament or simply fill the entire wall of the case.

It will be best if you combine several options into one: outline the drawing with a pencil, color it with markers, and stick beautiful trinkets around the edges. The main thing is that it all looks harmonious and pleases the eye.

If you don’t want to waste your time on decorations, multi-colored tape will suit you. You can cover the case with strips of different colors and widths. In this way you can decorate your case in an original way in just a couple of minutes!

If you are seriously interested in drawing or have a talent for it, use nail polish or watercolor paints. In this way you can create a very bright design that will always catch your eye.

You can also use the gradient technique. In this case, several colors are applied, the transitions between which must be made as smooth and imperceptible as possible. It all depends only on your imagination and desire!

How to make a completely new case for yourself

If you are already tired of looking at identical cases, you can make yourself a very good case at home, which you don’t even need to decorate - it will be a decoration in itself. So, let's look at some simple ways to make a case yourself.

To tie. Hand-knitted covers look very nice and give a certain feeling of coziness. To decorate this number (if more decorations are needed), sparkles, beads, buttons, zippers or clasps may be suitable.

Sew from fabric. This is an extremely simple way to make a case. To do this, you need to take a suitable fabric, sew a bag out of it, and make a “drawstring” on top where you can thread the lace.

This way you can tighten the case and not be afraid that the phone will fall out of it. If you wish, you can apply a beautiful applique to the fabric.

Made from leather. This method is very labor-intensive, but the result will be worth the effort! A leather case will always look impressive.

At the same time, a leather case is quite practical, since thick leather will protect the phone well from unexpected falls, water and dirt.

As a result, it turns out that an original decoration for a phone does not require large investments at all. Only a small part of the ways to do this yourself was described above.

How much your gadget will stand out from the rest is up to you to decide. After all, all you need is time, a little materials and imagination!