Where is the Home button on the iPhone and what it can do. How to display the Home button on the iPhone screen: tips and tricks How to make a control button on an iPhone

From time to time, the main button of mobile devices on iOS becomes less responsive - it starts to work with some delay or stops working at all. In most cases, this is due to a software failure and restoring its functionality is not difficult. It happens that after several years of active use, the Home button mechanism wears out and more serious intervention is needed.

Be that as it may, you can revive iOS devices without contacting specialists at a service center. There are four ways to fix the broken Home button problem on iPhone and iPad.

Method 1: Software calibration

Sometimes the main button of the iPhone and iPad smartphone becomes less responsive and starts to work with some delay. If this is due to a software failure, then it is necessary to perform a calibration procedure.

To do this, you need to open any standard application, such as weather or stocks. Then, press and hold the power button of your iOS device until the power bar appears. Now you need to hold Home until the bar disappears and the running application is unloaded from memory. After this, the Home button will work as expected.

Method 2: Adjust the position of the dock connector

In situations where the Home button on the iPhone and iPad stops responding to presses, a little trick will help, for which you will need a standard 30-pin cord. First, you need to place the plug into the iPhone connector, and then put your finger under the plug and gently press it from the bottom up. After this, all you have to do is click on Home. Now you can remove the cord and check the operation of the device.

Method 3: Use WD-40 spray.

You can restore the functioning of the worn-out Home button mechanism in the iPhone and iPad using the WD-40 aerosol known among car enthusiasts (or simply “Vedashka”). This product is used in the weapons and aerospace industries, aviation, and electromechanical production.

The spray is also used at home, the “Vedashka” eliminates the creaking of doors, it can be used to lubricate bicycle parts, locks, etc. WD-40 is also suitable in the case of an iPhone - just spray the product on the non-working Home button, and then make 5-10 quick clicks. As a rule, it comes to life and begins to respond to pressure again.

Method 4: Software duplication

If the three previous methods did not work, apparently, the button is really broken and specialist intervention is required here. Until you contact a workshop for repairs, you can take advantage of the software duplication function built into the iOS operating system.

To do this, go to Settings -> General -> Universal Access and turn on Assistive Touch by clicking the switch at the top of the screen. Now click the circle that appears on the screen and in the window that appears, click “Home”. Once you close settings, you can call this button at any time to return to the main screen.

In this case, this is a temporary solution that will allow you to use your iPhone and iPad even with a broken Home button.

To fit a screen of such a diagonal (5.8 inches) into the iPhone X case, Apple had to sacrifice the Home button, which was a hallmark of all iOS devices. In addition to a purely representative function, the key performed a wide range of tasks, ranging from activation to calling the multitasking menu.

Waking up the iPhone of current generations occurs in three ways: by pressing the power key, pressing the Home key and lifting the device from the table, provided that the appropriate mode is activated. Since the iPhone X was deprived of one of the treasured buttons, you can wake it up from sleep with a single touch on the screen.

Exit to home screen

In addition to the functions described above, performed by the Home key, it also returned the user to the desktop, minimizing the active application. It works even easier on iPhone X. In order to exit a running program, Tens owners will need to swipe their finger from the bottom edge of the screen to the top. This gesture on iPhone and iPad with the Home button brings up Control Center.

Unlock

Since Apple designers had to neglect the Home key with built-in Touch ID when designing the iPhone X, the smartphone is unlocked exclusively by the Face ID scanner. In order for identification to be successful, you need to activate your iPhone X and then allow the system to read your face. The main condition for successful unlocking is open eyes.

Calling the multitasking menu

Calling all previously opened applications is carried out in approximately the same way as exiting already running ones. It is enough to hold your finger at the bottom of the screen and slide it upward. According to Phil Schiller, who talks about this feature of the smartphone, you, due to its simplicity and logic, will certainly like it even more than double-clicking the Home button.

Call Apple Pay and Siri

On iPhone X, as before, you can call Siri with the voice command “Hey Siri” or, if the assistant's always-on mode is turned off, by holding down the power key on the side. As soon as you perform this action, the smartphone will instantly scan your face and call an assistant. In case you choose not to use Face ID, you will be prompted to enter the password you previously set. In order to call up the list of payment cards, you must press the power key twice.

Most of the buttons on the iPhone are virtual buttons on the touchscreen. There are also several buttons on the device's body that allow you to control basic functions, such as turning on the iPhone or changing its volume.

When iPhone is not in use, press the Sleep/Wake button to lock it. When you lock your iPhone, the display turns off, the battery charge is preserved, and no action occurs if you accidentally touch the screen. However, you can receive voice calls, FaceTime calls, and text messages. Alarms also go off and notifications arrive. You can listen to music and adjust the playback volume.

On iPhone 6 and iPhone 6 Plus, the Sleep/Wake button is on the right side.

On earlier iPhone models, the Sleep/Wake button is located at the top edge.

iPhone locks automatically if you don't touch the screen for one to two minutes. To set the lock time, go to Settings > General > Auto-Lock.

Turning on iPhone. Press and hold the Sleep/Wake button until the Apple logo appears.

Unlocking iPhone. Press the Sleep/Wake button or Home button, then move the slider.

Turning off iPhone. Press and hold the Sleep/Wake button until the red slider appears, then drag the slider.

For added security, you can set a password that you must enter to unlock your phone. Go to Settings > General > Password & Fingerprint (iPhone 5s) or Settings > General > Password Protection (other models). See Using a password to protect your data.

The Home button allows you to go to the Home screen and perform other actions.

View running programs. Double-click the Home button. See Start From Home

Use Siri (iPhone 4S or later) and Voice Control.

Press and hold the Home button. See Voice Control and Chapter 4, Siri.

On iPhone 5s, you can use the sensor in the Home button to recognize your fingerprint instead of entering your password or Apple ID to unlock your phone. See Touch ID sensor.

You can also set accessibility features to turn on or off when you press the Home button. See Accessibility Abbreviations.

When you're on a call or listening to music, watching movies, or other content, the buttons on the side of iPhone let you adjust the volume. The rest of the time, these buttons control the volume of ringtones, alerts, and other sound effects.

WARNING. For important information about preventing hearing loss, see Important Safety Information.

Lock ringer volume and alerts. Go to Settings > Sounds and turn off Edit with buttons. To limit the volume of movies and music, go to Settings > Music > Volume Limit. volume."

Note . In some European Union countries, iPhone may display a warning when the volume exceeds EU hearing safety guidelines. To set the volume above this level, you may need to briefly release the volume button. To limit the maximum possible volume to this level, go to Settings > Music > Limit. volume", then turn on the "Volume Limit" option. EU volume." To prevent changes to the volume limit, go to Settings > General > Restrictions.

The volume buttons can also be used to take photos or record videos. See Taking photos and videos.

Tap the Ring/Silent switch to set your iPhone to ring or silent mode

In ringing mode, iPhone plays all sounds. When in silent mode, iPhone doesn't play ringtones, alert sounds, or other sound effects.

Important! When iPhone is in silent mode, alarms, sound apps (like Music), and many games still play sound through the built-in speaker. In some regions, sound effects for Camera and Voice Recorder are played even when the Ring/Silent switch is set to Silent.

For details on changing sound and vibration settings, see Sounds and muting.

Using Do Not Disturb mode. You can also use Do Not Disturb to mute ringtones, reminders, and notifications. Swipe up from the bottom edge of the screen to show Control Center, then tap See Do Not Disturb mode

Apple smartphones and tablets compare favorably with products from other brands not only due to their high quality, but also ease of use. It is simply impossible to get lost in the navigation keys on an iPhone, iPad or iPod - there is only one. However, one of the main advantages of Apple devices is also one of their main disadvantages. The physical Home button tends to wear out. In this case, the ability to display it on the screen will come in handy.

When it is necessary

Even the most careful user is not immune to the Home key breaking. In this regard, adding a Home button to the gadget screen will be relevant:

• when the physical analogue is completely inoperable;
• in case of partial malfunction and periodic retraction;
• if desired, delay the breakdown of the physical button by using a virtual one.

It is worth noting that in the case of the first two points, displaying the Home key on the screen is an extreme measure. It is necessary to resort to it only if there is no valid warranty or the opportunity to contact a service center.

Displaying a virtual Home button on the screen of an iPhone, iPod, iPad

All versions of Apple software starting from iOS 5 have the Assistive Touch function, which allows you to display a floating Home button on the device display. To activate this feature you will need:

A virtual Home button will appear on the screen. It will be on the display no matter what menu or application is open. Therefore, it will have to be periodically moved along the edges of the screen to avoid inconvenience.

As for the functionality of the key, all the capabilities of its physical counterpart are fully preserved. By pressing the virtual Home button, you will see a small menu on the screen that offers the following options: Home, take a screenshot, change the volume, lock screen orientation, open the multitasking panel, etc.

You can also activate Assistive Touch using a Siri voice request. This will help save time and make life easier for users who have difficulty navigating through iOS system settings.

To turn off Assistive Touch, repeat the first three steps from the list above, then click Deactivate/Off. If the physical Home button is functional, you can turn Assistive Touch on and off by quickly triple-clicking it.

Video: how to transfer Home to iPhone desktop

Assistive Touch is a good and useful feature. But despite its versatility, it is much more convenient to control an Apple device using a physical Home key. Therefore, at the first signs of deterioration in the operation of the button, such as sticking, increased response time, etc., it is recommended to contact a service center, especially if there is a valid warranty.

On iPhones there is only one physical navigation button - the “ Home", which is located under the screen in the middle. This key allows you to minimize applications, call a virtual assistant and perform a lot of other necessary actions. Control your gadget without the " button" Home"becomes almost unrealistic - but what to do if it fails?

Fortunately, Apple developers have provided the ability to display the “ Home"on the iPhone screen. You will learn how to do this by reading this article.

Display the button " Home"The Assistive Touch function allows you to access the iPhone screen. This function is intended for people with disabilities, but it is more often used by owners of gadgets with faulty physical keys.

The Assistive Touch function is especially popular among Chinese users - in the Middle Kingdom, almost half of iPhones are controlled “from the screen”. Practical Chinese claim that this method of control is not only more convenient, but also prevents wear and tear on the physical buttons.

How to set up Assistive Touch? All you need to do is follow a few steps:

Step 1. Go to " Settings" and follow the path " Basic» — « Universal access».

Step 2. In chapter " Universal access» find the block « Interaction" It will have a subsection “ Assistive Touch- go into it.

Step 3. Switch the slider " Assistive Touch» to active position.

A translucent square with a white circle inside will appear on the screen - the menu launch button.

This means that the function " Assistive Touch"is activated and you can control the gadget without using physical keys.

“Assistive Touch” can be enabled on any Apple device with iOS version higher than 5.0.

How to use Assistive Touch?

First of all, you need to place the function menu launch button in a convenient place. You can move it along the screen frames by holding it with your finger. Placing the key in the center of the screen will not work.

Once you have decided on the location of the button, click on it. You will see a menu like this:

At the bottom of the menu there is a virtual button “ Home» . The functionality of the virtual button is 100% identical to the functionality of the physical one - in particular, by long pressing it you can launch Siri.

In the main menu " Assistive Touch» there are other options:

• Notification Center– allows you to call up the notification screen. The traditional way to bring up this screen is to swipe from top to bottom.
• Voice control- another way to “wake up” Siri.
• Command centre– makes it possible to display a menu for quick control of some of the functions. Pressing this key actually replaces the bottom-up swipe.
• Favorites. Through " Favorites» You can activate gestures that the user has created independently. To start creating a new gesture, go to “ Favorites" and click on any of the squares with the sign " + " inside.

Also in the main menu " Assistive Touch"there is a button" Apparatus" Clicking on it will take you to a submenu where you will find on-screen keys that allow you to perform actions such as locking/rotating the screen and changing the device volume.

Through " Assistive Touch"You can even take a photo of the iPhone screen - to do this, go to the function menu along the path " Apparatus» — « More" and click on the button " Snapshot screen" Only static images should be photographed this way, because the screen element responds with a significant delay.

On devices with iOS 9, the main menu “Assistive Touch” can be customized. In particular, users can increase the number of icons in the main menu to 8 pieces.

How to remove the Home button from the iPhone screen?

Deactivating the function " Assistive Touch" is performed in the same way as activation. You just need to follow the path on your iPhone " Settings» — « Basic» — « Universal access» — « Assistive Touch" and switch the toggle switch of the same name to the inactive position.

The square with a white circle inside will disappear from the screen.

How do I set up quick access to Assistive Touch?

You can adjust your iPhone so that to start " Assistive Touch“I didn’t have to go through the settings every time. Here's how it's done:

Step 1. Go to the section " Universal access» in the main settings of the gadget and scroll the screen to the very end. At the bottom you will see a subsection “ Keyboard shortcut».

Proceed into it.

Step 2. In the subsection " Keyboard shortcut"Tick the box next to " AssistiveTouch».

After this, you will be able to call the menu launch button " Assistive Touch» by triple pressing the physical key « Home” and hide it in the same way.

Conclusion

At least the virtual button " Assistive Touch" and can completely replace the physical button " Home“, this does not mean that you can delay repairing the device. If the gadget is under warranty, the user should go to the service center immediately - otherwise he risks completely saying goodbye to the hope of having the defect fixed for free.