Mailboxes ideas from the tree. Preparing for assembly. Mailbox installation

A mailbox is an essential attribute of a private house. If it is absent, then the appearance of the house and the whole site will not look complete. In addition to the lack of a mailbox today, this is not very convenient as before. Though with the development of the Internet and information technologies, the role of mail today has been reduced slightly and it has become more unloaded in its work, but it can not be done without it at all. The postal service is still needed today to deliver various notifications and correspondence, which is especially important for small towns, towns and villages.

Yes, and the presence of a mailbox, on a house fence or elsewhere in the infield is a tradition, and is an integral part of every single house.

What are the mailboxes for the house?

Until recently, the traditional mail box in our country looked like a rectangular or square flat box that was attached to the house itself closer to the entrance or to the fence.

Beautiful mailbox photo

All correspondence got into the mailbox through the upper part: if the incision was located on top, then often there was a lifting lid over it, to protect it from precipitation, but often the incision was located on its side, the contents were pulled through the lower part through the opening door. Such mailboxes almost always looked dull and boring, since in most cases they were all alike, and there was nothing original about their design. In the production of such boxes were most often made of metal, individual homeowners to at least somehow distinguish themselves made them with their own hands made of wood.

A box of postal metal street photos

As for other countries, the most original and more known to us from the films are street mailboxes of America.

The appearance of their coordinates differs from domestic analogues, traditional American mail boxes resemble a chest with a front door. But it is necessary to say that modern Americans are so fond of decoration and original design of this attribute that it is almost impossible to meet two identical boxes in private houses. Such diversity is generated by the fact that they often have contests for the most beautiful and original mailbox.

Original mailbox

Beautiful mailbox photo

A distinctive feature of the placement of the American street mailbox is that it is customary to attach it to the fence or the house, but it is fixed on a special stand along the road. This facilitates the work of the postman, since he no longer needs to approach every home. It's also worth mentioning that often there is a sign with a house number on such a post counter, it can also be framed as you like, and very often it looks very nice and is made in the same style with a box and a rack.

Street mailbox photo

Mailbox for a country house

It is also worth mentioning that in the American mailbox another additional function is provided, they are designed not only for receiving correspondence, but also for sending letters. Americans do not need to go to the post office every time in order to send a letter; it is enough to put it in the mailbox and raise a special flag on it that signals the postman that the mailbox has a letter to send. When the postman arrives, he sees the checkbox and picks up the letter for later dispatch.

Wooden mailbox photo

Mailbox photo

Ideas for the design and design of the mailbox

With the removal of the “iron curtain”, our country actively began to master the culture and life of other countries, in connection with which a lot of things today are taken from us from abroad. So with street mailboxes, there are less and less dull square and rectangular boxes. The original versions, more aesthetically designed, began to appear more and more often, the widespread development of various industries also contributed to this, and creative thought gained complete freedom.

Mailbox for a private house

In connection with all this, rather original mailboxes made of various materials have appeared. Most often today they are made of metal, special attention should be paid to forged mailboxes that are executed manually. As a result, their design is often not repeated and they look not only beautifully notes and solid. A good big house should have an equally good outdoor mailbox.

Forged mailbox photo

Metal mailbox photo

Many owners of country houses are creative in the design of the mailbox, and do their own hands making, using all sorts of available tools.

Very often, for this purpose, an ordinary brush and waterproof paint are used, with the help of them, if you have minimal artistic skills you can put any image on the mailbox, there are no borders for fantasy. Sometimes for this you can prepare a stencil to get a more accurate result.

Making a mailbox with your own hands

If you have the skills of a master and you have a carpenter's tool, you can make an original mail box with your own hands. It is not very standard to look like a mailbox in the form of a house, and even more original if it is in the form of a miniature of the main house.

Mailbox house photo

Wooden mail box

Often there are very original street mailboxes in the form of figures of various animals, plants, equipment, etc.

Below we suggest you to get acquainted with the options of beautiful mailboxes.

Mailbox photo

Read the same:

Creative photo ideas for the children's room from H & M Home Bay window in the interior: photos and design ideas Kitchen design with bay window: photo design ideas Figurines for home - photo interior design ideas

In each private house there should be a mail box, however offered in shops variants do not please with originality or beauty. If you want to get a beautiful mailbox, but are not willing to pay a tidy sum for this pleasure, why not make it yourself? In this article we will tell everything you need to know about the manufacture of mailboxes.

A mail box at home can serve not only as a place for collecting correspondence, but also as an effective addition to landscape design. To do this, you must install and carefully select its size, shape and design. As for the size, many believe that a small box for letters will be quite enough. And what if you receive a parcel post, or do you plan to write gardening magazines? In such a box, they will not fit. Too large constructions look cumbersome and inappropriate, and it is inconvenient to “retrieve” mail from them. We need to find a "golden mean" and make a box that would fit in itself a press of A4 format or a little more. Anything can be the material for the mailbox, the main thing is that the design does not let moisture through, otherwise the mail will get wet. The stores mainly sell metal (steel or aluminum) boxes, but their aesthetics, to put it mildly, is lame - ordinary rectangular boxes with a slot. If you have experience with sheet metal, welding machine or you can forge, then you can make a mailbox from metal yourself. Helpful hint: If you make a letterbox from sheet steel, then after assembly, cover it with anti-corrosion paint so that it does not start to rust. For others, the option of wood, more precisely, of plywood. It is easy to use, inexpensive and will allow you to build a strong and reliable box. For a mailbox it is better to choose moisture-resistant plywood - it will last longer. If this was not found, you can use the usual one, only after the assembly do not forget to cover the construction with a weather-resistant varnish. The same applies to crates from boards or other lumber. You can also easily make a plastic mailbox. To do this, you need plexiglass and a special polymer adhesive for it. You can experiment in this regard with a small thickness of polycarbonate. However, be prepared for the fact that sticking plexiglass or polycarbonate is quite difficult, so you have to be patient. All joints and gaps after assembly, be sure to coat them with silicone sealant. Mailbox Design So, we dealt with the practical side of the question, but what about aesthetics? For those who do not want to sacrifice beauty for the benefit of comfort, we suggest considering several interesting options. So, you can install a neat box in the traditional American style: a box on a long leg with a sloping lid and a red flag. Be that as it may, the material and the location of the box will be coupled with a stylistic decision. The design can be installed separately, as an American mailbox, attached to the fence or the house itself. Most often, the box is placed at the entrance to the site, hanging it from the gate. When you clearly imagine where the box will be located and what it is made of, you can go to the store for materials and get to work. Simple mailbox We suggest you consider step by step instructions on creating a simple and functional mailbox with your own hands. You can consider this option as the final one, and you can fantasize a little and add your original details. For example, to decorate the outer walls with painting, decoupage, to paste carved wooden figures or tiles there - there are lots of options. The material, it was decided to choose a tree, because any beginner will easily learn how to work with it. What tools and materials you will need: wooden bars; plywood (flag resistant); weather resistant varnish or paint; wood screws; small lock; drill; hacksaw for wood; pencil. How to make a mailbox with your own hands: Cut out the frame parts from a wooden block or a standard mounting rail. The cheapest wood, such as spruce or pine, will do. To make a roomy, but small box, you will need to saw off a rail with a length of 30 cm. In order for the frame to turn out reliable and durable, the thickness of the rail must be about 1 cm, and its width - 2 cm. Plywood is needed for trimming the frame. Take two pieces of 30x25 cm in size - this will be the facade and the back wall. Two elements of size 30x6 cm will go to create sidewalls, and two of 25x6 cm for the top and bottom of the box. Go through all the details of the construction with emery paper, paying special attention to the corners and side edges. If you grind them a little, the box will look much neater. Saturate all parts with wood antiseptic. It will protect the material from premature decay and damage by insect pests. If you want to make an imitation of expensive wood, cover the details with a stain - the more layers of stain, the darker the color of the tree. Connect the 4 guide rails, screw the back wall, sidewalls and bottom of the future box. Use small wood screws and a screwdriver. It remains only to make the front part with a lock and arrange the top with a slot for correspondence. Without a special tool, making a neat slot in the narrow top panel will be quite problematic, so we suggest using an alternative. Use not a monolithic panel with a width of 6 cm, but two thinner parts 2.5 cm wide. When you attach them on top, there will be a flat slot 1 cm wide in the center - this is enough to put through a plump envelope or newspaper. With the design of the front panel, too, there may be problems, but they are completely solvable. It must be done according to the type of door that you will open to get the mail. To one of the sides you need to fasten the hinges and hang the door on them. Loops can be used the smallest (for furniture). Attach the hinges on the mailbox door under the padlock. Define the type of lock yourself - you can choose the usual one on the key or a more complex model with a code. Important point: Since the slot is at the top, it is important to prevent moisture (rain and snow) from entering it, so make a small canopy over the box or place it under the porch canopy. The simplest protection can be made of sheet steel by screwing it over the box for a couple of loops. There is another way - to make a slot on the front panel, but in this case it is desirable to build a small canopy. It remains only to decorate the box in any chosen way and hang it at the entrance to the house. Thus, with minimal financial and time costs you can make a convenient and reliable mailbox. Of course, you can always come up with something more complicated, but this will require more skills and the availability of special tools. From the design, size and complexity of the design will depend on how it is installed. If you are attaching the box to the gate, then for installation you should prepare several holes in the back of the box and the gate. Use bolts and nuts for fixing. To hang the box on the fence of corrugated or wooden boards, you can use ordinary aluminum clamps. In the back panel, make two holes on one level, thread a clamp through them and fasten it on the horizontal bearing beams of the fence. Installing a mailbox on a concrete or brick wall is a little more difficult. To do this, you need small anchor bolts. Complex mail box If you want to make a more original design and are not afraid of difficulties, we suggest using the instruction outlined below. Pine can be used to make such a box, but it is better to choose a more durable and strong wood, for example, oak or walnut. Of course, in order to get a nice and smooth mail box, you need to have at least initial locksmith skills and have appropriate equipment at hand. The main material in this case is an oak board 12 mm thick. To work you need the following tools and materials: wood panel for the rear wall (A) 115x395 mm; panel for the front wall (B) 115x270 mm; two sidewalls (C) 100x345 mm; inner panel of the front wall (D) 80x115; bottom (E) 95x115 mm; door; castle; screws with countersunk head 2.5, length 12 mm; brass screws 5x40 mm; decorative washers; hooks; sandpaper; wood glue; antiseptic for wood; weather resistant varnish. From the tools you will need a jig saw (better electric), a hacksaw, a screwdriver or a screwdriver and clamps. In the image below you can see a detailed plan for assembling the correspondence box, which shows all the details and the way they are docked. First, draw out the lumber with a simple pencil and cut out the details of the required size. Treat all elements with emery paper, carefully grinding the corners and end parts. Be sure to soak the wooden parts with antiseptic before assembling. How to assemble a beautiful mail box with your own hands: Even if the product is not exactly what you expected, the natural beauty of the wood will make it very elegant and original. The art of creating mailboxes has long been turned into a separate area of ​​design. If you want to test your strength in this interesting business, surprise your neighbors or just spend time with benefit, make a mailbox yourself.

Owners of their own houses or dacha plots still receive letters, write out newspapers and magazines, and there is also a need to deliver invoices or parcels. And in order for all this correspondence to be delivered to the addressee, it needs to have a special cell at the place of residence. Of course, the modern market offers a variety of models and variations of this product, but it’s so nice to make a mailbox with your own hands, to put a little of yourself in it, and even thanks to an unusual design, to embellish a residential house or summer cottage. The article will discuss how to make a mailbox.

There are plenty of options for creating your own mailbox. Between themselves, they can differ in shape, size, color, construction and material of manufacture, as well as style of design. What are mailboxes.

  Types of mailboxes for a private house

Most of the models under consideration are fairly easy to do on their own, and this does not require the purchase of expensive materials or equipment. So, what kind of mailboxes can be found today? First of all, it should be said that the style of the mail determines the general appearance of the site or the exterior of the house.

• It is also important when creating a mailbox to take into account the amount of correspondence sent. That is, if the owner receives a lot of letters, magazines, newspapers or advertising leaflets every day, then a more capacious product will be needed, if there are a minimum number of letters, then you can build a small box with an original decoration. Very often, the mailbox is used not for its intended purpose, but as a decorative element. The product is installed in a prominent place and perfectly complements the general view of a private house or a backyard area.
• There are several style solutions for the design of the mailbox. The most famous American and British designs for receiving correspondence. The traditions of Europe and America are somewhat different from domestic. For example, in US cities, postal cells are necessary not only for receiving letters, but also for sending. If there is correspondence in the box, then the postman takes it and takes it to the post office. But how do you know if you want to send a message? For this purpose, on each mailbox in the states special flags were invented. If the flag is raised, it means that the postman needs to look inside, if it is lowered, it means that the box is empty.

• Another feature of such structures is that they are not installed as structures that are familiar to us on walls or a fence, but on lawns or areas near paths leading to a house, and are fixed on vertical supports (metal, wooden and even stone). The shape of such products resemble a small container or house, which has a semicircular hinged lid on the end.
• This is a standard form, but in many states very often competitions are held for the most original letter box. That is why near some houses you can find unusual designs in the form of fairy-tale characters, animals or any abstractions, as well as installed on various supports. In addition, very often purchased products are simply decorated in a special way and thus stand out from the masses of others.
• A slightly different tradition exists in the cities of Great Britain. Here, mailboxes are installed directly on the ground near the entrance door or at the path with the entrance to the housing. In appearance, this design resembles a small cabinet, which may have brick or stone walls. Of course, other materials are used - wood, metal and even plastic.

• Such a structure should be combined in style with the house and the site, that is, if the walls of the building are made of brick or have it in design, then the mailbox will be made of this material or stone gates, usually complemented by stone buildings for receiving letters and press . To the postman was easy to put the correspondence, and the owner easily got it, the boxes are installed as if on a stand, which is an indivisible continuation of the design. That is, this product is stationary and does not involve movement from place to place.
• Yet the most common type of letter cells in our country is traditional or otherwise they are called standard mailboxes. Their main feature is that they have a rectangular shape, and the correspondence gets inside through a small gap. In order to remove a letter or newspaper, you must open the door or move one of the walls. Such structures are very often installed on the doors of apartments. These products are slightly more American mailboxes and more mobile than English ones. They can be made of a variety of materials, as well as have various forms.
• Of course, modern mailboxes are no longer just a rectangular box, there are decorative elements and an original look. Such products are the easiest to manufacture, convenient to use and at the same time can perfectly decorate any structure, be it a multi-level cottage or a small country house. They are installed on the fences, walls of housing and even on a separate stand.

  How to make a mailbox with your own hands

So, if the standard, available in the sale of products are not the limit of dreams and really want to create something of their own, the original, then it's time to get creative. First of all, it is necessary to determine the specific idea, the appearance of the future mailbox. Then, it is necessary to decide what materials will be needed to implement the plan. Consider how to create your own mailbox from the tree. This is the simplest option, and at the same time it is possible to create a real masterpiece, from which it will be so nice to get letters.

• The construction of the structure, something like the work of creating a birdhouse for birds, probably in childhood, many were engaged in this type of activity. For the mailbox building procedure, you will need a simple set of tools: a hammer, a saw, a ruler, a pencil, a screwdriver, hardware, or glue. Materials will require wooden boards, boards or sheets of plywood, chipboard, MDF, etc.
• Next, determine the size of the mailbox. Specific parameters are chosen based on what is planned to receive. If these are only letters and small advertising booklets, then a small product will suffice, but if the box is designed to receive large magazines, then its dimensions should be appropriate. In any case, it is always better to make it a little more than the standard one, then you don’t have to worry that not all printed products fit inside.

• The next step is to define the design. This concerns not only the features of the form, but also what elements are needed for decoration. After all, the box for the press and letters must be combined with the exterior of the house, and, therefore, any details must overlap. Also this stage involves the selection of a specific material and the future color solution.

When the choice of form, materials, colors and decorative elements is made, you can begin to manufacture parts.

  Step-by-step instructions for creating a mailbox

• You will need wooden blocks, plywood, preferably moisture resistant (or use special impregnations to help make parts sufficiently resistant to precipitation and other weather phenomena), also metal corners, wood glue, screwdriver, screws and a manual or automatic saw or electric powered saw . In addition, depending on the device of the cover, it is necessary to prepare the hinge device, as well as the lock on which the door will be locked.

• Since our box has a more complex shape than just a rectangle, it is recommended first to create a frame of bars. For this purpose it is sufficient to use rails with a section of 20-10 mm. The length will depend on the specific model, but approximately 20-40 cm is enough. The resulting basis for the product will resemble a cube in shape, but will have a small triangular roof.
• The next step will be fixing the walls. Durable plywood is perfect for this purpose, but you can also use regular boards of small thickness. You will need two parts for the side walls, two for the front and rear panels and two for the top and bottom, as well as two parts for the roof. Of course, we should not forget that all the details should be treated with impregnations, which will protect the finished structure from natural factors and extend the service life for a longer time.

• Plywood is screwed to the frame with the help of corners and screws, for greater reliability, the bottom of the mailbox can be additionally glued with glue structures, as well as lubricate all the joints of the finished structure with a moisture-resistant sealant. Do not forget to make a slot on the front or top panel. Through this gap, the postman will put letters and press inside. It is also necessary to make the opening door. There is a possibility where the roof of the house will serve as the opening part. To do this, attach this element with the help of hinges.
• In cases when making a gap in plywood is difficult, for example, with insufficient experience, you can use a little trick. Use not a whole piece of plywood, but two halves that will not reach each other for a certain distance. Usually for these purposes, there are enough slots of 1-2 cm, but when you plan to receive more dimensional correspondence, you can leave more.

• After completing all the above procedures, we can assume that the box is almost ready. It will only be necessary to paint or decorate it in any other way and place it in a permanent place, and also take care of protecting letters, magazines and newspapers from rain. Indeed, in cases where the slot for incoming correspondence is located at the top, moisture can easily penetrate inside. For this purpose, a special visor should be installed above the box. It is best if it is made of metal.

The described method implies the creation of the most simple variant of a mail box, which can be made independently even without special skills. Of course, in cases where it is possible to fabricate more complex shapes and designs, do not give up on yourself in such a pleasure. After all, the mailbox is not just a box for receiving letters, it is also an excellent element of decor.

  Mailbox decoration options

• There are several fairly common ways to decorate a mailbox. First of all, you can use the paints and apply on all elements of the design of any patterns, ornaments, and sometimes whole pictures. Even without the presence of artistic skills, this task can be realized independently. Stencils made of paper, cardboard or plastic can help.
• Acrylic paints are best suited for painting on materials such as wood or metal. In order for the image to last for more than one season, it is recommended to begin with covering the entire surface with a layer of white primer, and a moisture resistant varnish is applied over the design, which will also protect the structure from damage caused by rain or snow.
• The next decoration option assumes that the postal cell will be decorated with such type of creativity as decoupage. This is also a fairly simple way, which does not require special skills. It is enough to choose the desired image depicted on a napkin or decoupage card. Further, the surface of the structure is painted white (this is one of the standard solutions), and then small fragments or the entire picture are glued onto the walls of the mailbox using PVA glue. When the glue is completely dry, the top should be applied to the varnish in several layers.

• Another solution that will help make the mail original is to fasten several decorative brushes, beads, shells and other elements on the box. To keep such a decoration securely and to serve for many years, you should choose a good glue.
• Even the unusual coloring will make the mailbox an original decoration of the whole country house or private house. And if you turn on the fantasy, use the materials at hand and various artistic techniques, you can get the real works of art. With the right approach, you can decorate the box even with fresh flowers that will grow in small containers on the sides of the structure.

  Original solutions for creating mailboxes

• Not only decorations can give originality to the mailbox, but it is also possible to use unusual items to create the design itself. For these purposes, suitable old interior or unnecessary things. For example, a product made of a plastic bottle or a large diameter PVC pipe will look very unusual. This option is perfect for people who do not subscribe to a lot of press and receive correspondence in small quantities. It is enough to attach a round door to the tuba, which will serve both for the delivery of letters and for their removal.
• A box made of round logs or thick logs can be a similar option. Here you should remove the core, and place inside a suitable container, it can be a metal pipe, sealed on one side, and the other with a welded door. In this case, this cover can be decorated with wood bark, so that the feeling of naturalness was complete.

• If a more capacious design is required, then an empty option will become an excellent option. system unit. Such a product is installed on any support and can even be bolted to the fence. It remains only to build the door and decorate the box accordingly, so that the postman immediately understands that it is the box for letters and newspapers.
• Generally, to make a mailbox, which is not ashamed to install in your own home, is not so difficult. You can use Plexiglas, metal, wood and even cardboard, using the technology of gluing, welding or assembly on the hardware. In addition to the choice of material and form, it is equally important to properly fix the finished box or place it in a permanent place.
• The installation site can be a fence, a gate, a wall of the house and even a separate support. It is important not to forget when designing products to think in advance about the method of attachment. For example, in cases of posting on the gate (wooden or metal), it is necessary to make small holes in the back wall and fasten with nuts and bolts. If you plan to install the structure on the stand, then the fasteners should be in the bottom panel.

Summarizing, we can say that despite the fact that technical progress in the world has reached unprecedented heights, paper letters and the press still have not gone out of fashion. And this means that such products as mailboxes are still needed. And not always things bought in a store can ideally complement the style of a private house or summer cottage. That is, if you really want an originally decorated and decorated place to receive correspondence, then the best solution would be to perform this element yourself.

Mailbox is an important part exterior decor  both private and apartment building. Beautiful and original, it is able to transform the look of the local area, place important accents and ensure the safety of the received correspondence. The best option would be to make a mailbox with your own hands.

Anyone can make this household item. For this, it is necessary decide on a model  and materials, find everything you need and some free time. With your own hands and efforts you can realize both simpler options and make a real work of art for your home. Materials and sizes can be any. The main thing is to foresee them. Mailbox sizes should allow you to store mail of any size. Mailboxes for a private home should preferably be made of more solid and protected materials. Perfect metal or wood.

Different types of mailboxes

Mailbox comes in various shapes, models and sizes. The most common classical, English and American styles.

Classic  looks like a small rectangular box with a gap for correspondence. Usually it is attached to fences and walls of houses. It is most often found in the territory of the post-Soviet space and is made of metal or wood.

AT english  style - metal box, which is either mounted in a wall or carried out as a separate pillar.

American  The option is installed on a separate support and has a special checkbox to notify the required sending.

Original postal boxes can be made of any material, paper, cardboard, bottles or household items and take any form, depending on the desires of the author.

Original mailboxes

Design and unusual solutions always look interesting and emphasize profitable. individuality. You can make interesting mailboxes from already unnecessary items. Below are the most original options that can be supplemented and improved.

Mailbox from a plastic bottle

For manufacturing it is necessary to take a plastic bottle with a capacity of 2 liters. From her cut off the neck. You can cut it to the end and then attach it in the form of a door with ropes, you can cut it out not until the end, so that the back end rests on the bottle. You can fasten it to the destination on bolts or ropes. You can decorate for every taste. For additional reliability, a visor can be arranged above the box. It will be a great option for the original do-it-yourself mailbox, which supposedly will not receive much press.

Cardboard and fabric mailbox

For this option, you will need a sheet of cardboard, a pattern (it can be found on the Internet), a fabric for decorating, accessories, glue. From the cardboard, you need to cut out all the details. This will be the basis of the box. Cut out the parts on both sides paste over with a cloth. This can be done with the help of flizelina and iron. Then all the details need to be stitched together, leaving one side (door) sewn with one side and fastened with Velcro up.

Mailboxes from unnecessary items

A beautiful mail box can be made from unnecessary items. Can be used any items for which only enough flight of fancy.

For example, a cuckoo clock may look like a wooden mailbox. To do this, you need to clean them, equip them with a lock and decorate them. The place where the cuckoo jumped out from will be a hole for correspondence. And instead of the dial, you can organize the door for the seizure.

The old and faulty system unit is also able to perform these functions if all parts are removed from it, leaving only the metal structure. For the decor, it must be primed and then it will easily be covered with paint and other details.

The scheme of manufacturing of a mail box from a tree

• wooden bars;
• plywood sheets;
• wood screws;
• hinges for doors;
• varnish or paint;
• a metal sheet;
• screwdriver;
• hacksaw or jigsaw.

Manufacturing:

Then the wooden box should be carefully processed with sandpaper and decorate to your taste. This is an example of a standard mailbox. Starting from this, it can be supplemented and modified to suit your taste and exterior of the yard.

Metal fabrication scheme

Required materials and tools:

• tin sheets;
• bulgarian;
• drill;
• rivets.

Metal mailboxes are the most difficult to manufacture. Here, in addition to the idea, it is necessary to have minimum skills in working with metal.

Manufacturing on an example of the American mail box:

Let's talk about secrets ...

Have you ever had joint pain? And you do not hearsay what it is:

• the inability to move comfortably and easily;
• pain during or after exercise;
• discomfort when climbing and descending the stairs;
• inflammation in the joints, swelling;
• unpleasant crunch, clicking not at will;
• unreasonable and intolerable aching pain in the joints ...

Please answer the question: does this suit you? Is it possible to endure such pain? How much money have you already “leaked” to an ineffective treatment? It's time to end this! Do you agree? Today we publish an exclusive interview with Professor Dikul, in which the doctor revealed the secrets of getting rid of joint pain, the treatment of arthritis and arthrosis.

Attention, only TODAY!

The factory variations of boxes for collecting correspondence are often monotonous and do not have a special originality. Traditional metal or wooden boxes, which are decorated with the apartment number and a miniature padlock, will not please many.

Street mailbox

Consider a few step-by-step workshops, how you can make a mailbox for a private house with your own hands.

Varieties and styles

The mailbox, which is located in the local area, often serves not only for its intended purpose. Such products also become a harmonious addition to the design of the facade of the building. Therefore, before making such a product, you should determine the variations of performance. Experts identify three main types of mailboxes:

1. In classic style. This design is a vertical box, equipped with a slot for letters and other correspondence. Typically, they are installed by hanging on the fence or the wall of the house. Despite the simplicity, even such a box can be original decorated with the help of painting, decoupage technique and other techniques.
2. In English style. This product is made in the form of a cabinet-table, which is mounted directly on the ground. Typically, the mailbox is placed a few steps from the central entrance to the house. Externally, this design resembles a miniature layout of a residential building and is made of solid steel or through brickwork.
3. In the American style. Such mailboxes are a metal box in the form of a half-pipe. They are mounted on a separate support or wooden rod and equipped with a special flag that signals the presence of correspondence inside. It simply rises if the box contains letters.

Options on the photo

Mailbox variations depend on the owners' imagination.

Street mailbox - supplement ensemble country house

Outdoor mailbox must be in harmony with the design of the house

Undoubtedly, every homeowner wants his own design not only to have an original appearance, but also to be durable and robust. Therefore, before planning mailbox manufacturing, a number of basic recommendations should be taken into account:

1. In order for correspondence not to be exposed to the harmful effects of atmospheric precipitation, it is necessary to provide a visor over the slit for lowering letters.
2. If you plan to place the door to take out the contents of the drawer on the front panel, then it is important to accurately calculate the hole dimensions. This will prevent the formation of gaps, through which snow and moisture penetrate.
3. When planning to install the door at the bottom of the box, it is advisable to make a flap design to take out the correspondence without difficulty.
4. If you want to make a box of wood, you must protect the corners of the structure with special metal plates. This will increase the strength of the product and further facilitate the repair.
5. For security, it is necessary to provide a lock or alarm.

Just a few simple rules will extend the life of your product

From wood

Very popular designs in domestic spaces are made of natural wood. This material allows you to experiment with the forms of the box, as well as the external design.  In addition, it is easy to get it, and for work does not need any professional skills.

So, to build a mailbox, you need to prepare the following materials:

• wooden bars;
• protective impregnation;
• wood screws;
• paint brush;
• door hinges (small size);
• dense moisture resistant plywood;
• lock for locking;
• screwdriver;
• hacksaw.

The construction process looks like this:

1. First of all, it is necessary to cover the wood material with a protective compound that will prevent damage by moisture or insects. When the sheets dry out, you can begin to assemble the structure.
2. The dimensions of the walls depend on the desired dimensions of the future design. For work, you will need to cut the timber into several parts so that there are 4 slats corresponding to the length of the structure, 4 shortened parts - for the width and 4 pieces. to the size of the height of the side walls.
3. At the first stage, it is necessary to assemble these fragments in the form of a rectangle, that is, make a frame.
4. Then on it it is necessary to attach the plywood sheets cut out according to the dimensions - lateral fragments, back part and bottom. The result will be a box without a top cover and front panel.
5. In order not to cut a hole for correspondence from a single piece of wood, you can make a cover of 2 panels, leaving a 1 cm slit in the middle.
6. The front part of the drawer will look like a door with a small lock. This will allow to easily remove the mail and at the same time protect the structure from intruders.
7. For its construction it is necessary to install on the side panel of the loop - 2 pcs. for the door itself and 2 pcs. for locking design.
8. We hang the front wall and check the performance.
9. This completes the manufacture of the mailbox.

Important! Since the slot for lowering letters is at the top and is not protected from precipitation, there is a risk of damage to correspondence. To do this, you can attach a metal sheet directly above the hole, which is fixed on small loops. So the second protective cover will turn out.

Wooden mailbox - easy to manufacture and design

Of metal

This design is the most durable and durable, but to make it more difficult to order. To do this, you will need minimal skills in processing metal structures. So, for the construction of such a product it is necessary to prepare the following tools:

• a metal sheet;
• bulgarian;
• jigsaw or saw;
• welding machine;
• anti-corrosion treatment;
• paint.

The workflow looks like this:

The American mailbox will require more work, but it will be stronger and more durable.

From a plastic bottle

Practical and original mailbox can be made from scrap materials. The process is incredibly simple and fun, and as a result you get an attractive design that can be decorated to your taste. So, to create a box you will need:

• plastic container with a capacity of 5 liters;
• stationery knife;
• fragment of plywood 25x5 cm;
• lightning;
• quick-drying fabric;
• glue;
• long needle;
• synthetic strong thread.

The manufacturing process is performed in the following sequence:

1. Empty containers must be cut across at the bottom so that the bottom opens, but does not separate completely. We attach sewing zipper to the cut to make sure that the length of the product is suitable.
2. Using a needle and thread, we sew a zipper to the bottle. You can also glue it, but it is worth considering that the box will be on the street, and under the action of precipitation the strength of fixation will decrease every day.
3. We check the performance of the lightning - an improvised folding bottom should open and close well.
4. We wrap the container in a decorative material - cloth, burlap. Leave the bottom transparent to see the presence of correspondence. Excess material is cut off.
5. Then we remove the fabric and glue the surface of the bottle. Again, we apply the material and fix it firmly. We expect the composition to dry completely.
6. On the front wall of the container cut a hole for the mail.
7. We fix a plywood panel on the back using glue. You will need it to mount the box on a fence or wall.
8. On this product is ready. After complete drying set the box in the right place and enjoy the work done.

Important! For decorating, you can use not only the fabric, but also any kind of moisture-resistant coatings. You can paint the facade, make a painting and varnish or decorate with artificial flowers.

A mail box from a plastic bottle is the simplest version of manufacturing

From cardboard

Such products are easy to manufacture, as well as cost-effective. For the construction of the mailbox will fit any unnecessary box. All you need is to put a minimum of effort and a bit of imagination. In this example, we will consider a step-by-step master class on the example of an empty box out of tablets for a washing machine.

So, before work it is necessary to prepare such toolkit:

• carton;
• stationery knife;
• glue gun;
• decorative paper;
• varnish on wood;
• paint brush.

The construction process is performed in the following sequence of actions:

As you can see, to make the original mailbox is completely easy, you need only a little effort and imagination. Various variations of designs allow you to make it from the most simple materials, using even recyclable materials. However, before you make your own box, keep in mind that its appearance should be in harmony with the overall ensemble of your site.