After reflashing, the smartphone does not turn on. What if the phone does not turn on after the firmware?
Since the firmware largely depends on the functionality and other important aspects of the device, many users are trying to update the firmware of phones themselves. As a rule, such amateur performance ends successfully, but if something went wrong, the phone may stop turning on, which means that it will take urgent measures to return the phone to its working state.
The password must contain at least 8 characters. Step 4 - Update the product. This is the step of downloading the firmware files to the computer. Download and unzip the files on your computer. Make sure you have the correct files for the camera. If you skip this step, there will be 3 files. Here is the list of files that you will see in the case of your camera. remember; Do not double-click any of these files. The files will be copied and you will see them in the window. If the camera is connected to a computer, physically disconnect the camera from the computer and make sure that the camera is turned off.
The update will start automatically. After you hear the camera beep and sound a beep, press the power button once. You must type 00 in the number of files, which means that the firmware update was successful and that the camera is ready for use.
Possible causes of breakage
There are a number of reasons that can cause such manifestations and deprive the phone of the ability to work correctly.
As a rule, all of them are associated with a violation of the instruction, which should be followed. Most often, a failure causes:
- ?? Emergency shutdown of the phone or computer during the firmware;
- ?? Unsuitable firmware version;
- ?? Other errors made by the user.
Despite the fact that the state of the smartphone after an unsuccessful firmware can frighten the owner, there is nothing to be afraid of, since in the overwhelming majority of cases, it is quite possible to return the phone to its original state.
You can also try to restart the computer and reconnect the camera. You may need to reformat the card to solve the problem. Here are some tips to help you solve the problem. Insert only the battery. Press the power button. If the camera is turned on, it is frozen: now everything should work fine. Do not try to turn on the camera while charging. If it turns on, your battery is discharged and only charging is required. If the light is dim, remove and reinsert the battery and try turning the camera back on.
Recovery measures
If the phone does not turn on after the firmware, the android is crooked, first you need to determine which method was used to perform the update. If the mechanism and firmware provided by the manufacturer were involved, then it would be much easier to restore the smartphone. To do this, you need to visit the official website of the device manufacturer, which contains the necessary software for this, and also describes in detail the recovery process. It is important to take into account that for each model of the smartphone it will be different, therefore it is possible to give only general recommendations.
You may need to perform this action up to 10 times to turn on the camera. The following are some troubleshooting steps. Make sure you have the latest camera firmware. If you have the latest firmware, you may need to perform a manual update again if the firmware installation is damaged in any way.
If the camera firmware has already been updated, but you want to change the camera name and password, you will need to update the firmware. Click the option to change the name and password. Password requirements Password must contain at least 8 characters. Tactile rear door is waterproof to a depth of 3 meters.
But the situation changes radically, if the user planned to install a so-called "custom" firmware on a smartphone. It is performed, as a rule, through a backup recovery mode, called Recovery in most devices. To restore a smartphone, spoiled this way, you will need to perform a simple sequence of actions:
It is recommended that you use. When the window flickers, a temporary preview was lost. This means that you do not stop recording if you wrote down when the connection to the application was lost. To restore the preview, you can try the following.
Once you stop recording or stop taking pictures, the preview will start automatically. The password must be between 8 and 63 characters. Now you should be able to view and control the camera to which the phone or tablet is connected. Turn on the remote control. Follow these steps to make everything work together.
- Start recovery mode (on most smartphones, you will need to simultaneously hold the power button and volume), navigation in which occurs using the same keys;
- Review the Backup section for a backup for recovery;
- If it does not exist, you need to select Factory reset or the equivalent;
- Clear the cache by selecting the appropriate item in the menu;
- Insert the memory card containing the firmware, then repeat the installation.
After performing these simple manipulations, the smartphone returns to a working state. For correct operation after a similar restore, you may need to reset the android settings already in the familiar phone interface. This will avoid small errors and improve the stability of the work.
Do not forget to find yourself in range. Close and reopen the application. Test with airplane mode on. Be sure to check the operator data plan. This happened with some prepaid operators. Touch it if you visualize it. This does not apply to devices that do not have a gear icon.
Compare your password with the following list of allowed characters. If the password does not meet these criteria, you will need to change it for real-time preview. It restarts the camera firmware. Remove and reinsert the camera battery. Turn on the camera with the application. If camera control or preview is lost, the camera will remain in the last activated state. This means that it will not stop the recording if it was recorded when the application connection was lost.
Firmware smartphone on the operating system Google Android is always accompanied by the risk of "oskorpichivaniya." Even if you have followed all the instructions of the manufacturer, the smartphone can go into perpetual reboot. Even if the shell used by you is official, then there is no guarantee that you will again see a workable Samsung after reboot.
Eliminates an error that can cause too much compression of photo files. . With the help of these tools, we can even check if updates to the firmware of our device are available and even update them, but these programs often do not justify themselves.
Updating the software step by step
Therefore, in addition to this guide, we will leave you a link to the necessary documentation so that you can carefully consult it. Let's go to the mess. After installing and installing it, you will see this screen. First of all, you will need to install the firmware on your phone. This can be done in the instrument itself, as there is one in the menu that allows us to consult by phone, country and operator.
Let's figure out what to do if the phone does not turn on after the firmware. How to correctly repair a smartphone after an unsuccessful firmware? We try to perform the actions clearly according to the instructions, at the bottom of the article I will attach a video instruction, it will help to understand such a simple matter as cellular repair.
Cellular turned into a brick. No panic.
How to revive the brick android after the firmware? So, you asked for a device, a characteristic vibration told you that a reboot is taking place. The first thing you need to see on the Samsung screen is the green logo with animation. This tells us that the device is alive and working, maybe it will start right now. If it does not start, then the problem is in the software. But the most important thing is that the gadget is not broken!
Then press the lightning button that you see in the image above and we will come to this screen. There we can choose the firmware that we want to install. On the right we will see some napkins, which the program marks by default. Immediately after the appearance of this screen.
When we reach this point, we must. The blinking process will begin and we will see this screen. Some cards can start the maintenance mode even if they can not be started in the normal mode. 
Disconnect all peripheral devices connected to the computer. . Solving problems with system startup.
The logo appeared not only inspires the user with the hope that the smartphone Samsung can be returned in working condition, but also that it should be restored using the Recovery menu.
The first way is the Recovery menu
Recovery is the best friend after installing a different firmware version, if android does not start. The recovery menu allows you to fix most of the mistakes of smartphone firmware. If you have a question, how to restore a brick phone android from Samsung, then the first answer is Recovery. Here is the instruction:
If your computer does not start up or starts up, you will notice or hear symptoms indicating a common problem area. An overview of troubleshooting when the computer does not start or does not start properly. After removing non-system drives.
Use the arrow keys to select "Yes", and then press "Enter" when the "Quit" prompt appears and save the changes? Follow the instructions to restart the computer. . If the computer stops responding to the black screen, continue with the troubleshooting steps described in the next section.
- Switch off using the regular button. Do not burn any lights on the front panel.
- Hold down the power button and the sound reduction button (rocker) at the same time, usually the manufacturer places them next to each other. This is a standard procedure, but some manufacturers change the algorithm in connection with the specifics of their particular model.
- Recovery. In recovery there is a point "restore to the factory". This item is most likely to return your gadget to life, because it restores the device as if it had just come off the assembly line. First you need to recover this way, and make sure that the phone is working. Then you can try to flash it again.
- Re-flashing. Once you have restored the factory settings via recovery and realized that your device is working, you can proceed to the firmware for the new version or custom assembly, as you wish. To do this, the gadget must certainly download the zip-file with the firmware, and in the recovery menu, select install zip from sdcard. If after all the procedures there are errors, and the device is being scanned, then the problem is in the shell file itself.
As you understand, recovery is the main tool, in the case when the firmware on the android phone is crooked. It is better not to allow the situation when you need a third-party service to restore the gadget.
To perform a memory self-test, follow these steps: Use the left and right arrow keys to go to the menu selection and find the "Diagnostics" option.
- Turn off the computer and wait five seconds.
- Use the up and down arrow keys to select the memory test.
- Click "Enter", and then "Yes" to execute the memory test.
Flashboot is an optional method
Flashboot was originally developed for the technology produced by Sony. But for other devices, the method will work, with rare exceptions. What should I do if the phone does not turn on after a failed firmware?
To get started, you need to download the program flashboot on the Internet and connect your smartphone to the computer via a cable. Include it is not necessary. If Flashboot does not respond, then your model is not compatible with the application. If the software "saw" the device, then:
- The applications do not work, they stop working.
- Errors with reading images and music in external memory.
- External memory is not displayed on the phone or on the computer.
- A cell phone is slow enough to do anything.
Download the source operating system. In my case, download the Panama version, in theory the country does not matter if we are based on the type of region that our phone supports, in the next image we see the compilation number of my phone.
- Turn off Flashtool and disconnect the gadget from the personal computer.
- Make sure that the cellular phone is turned off.
- Find the folder into which you installed the Flashtool program, there find the folder firmwares. It is in this folder you need to put downloaded firmware to restore the device.
- Run Flashtool again and click on the "lightning"
- Among the offered modes, choose Flashmode.
- You will see a window in which you need to select the downloaded firmware from the folder firmwares.
- Once the program has prepared the necessary files, it will prompt the user to connect the device to the computer.
- Connect the device to the computer and wait for the process to finish before you see "Flashing finished" in the status bar.
- Disconnect the gadget from your computer and restart it. Pleasant use.
This method shows itself well, but there are a number of devices that do not react to the proposed program in any way. In this case, you need to find out which firmware program your manufacturer recommends. What if the phone does not turn on after the next firmware, and flashtool does not help? Samsung, for example, developed the Odin program, and Galaxy devices are not stitched using the flashtool utility.
Now when you turn it on, press and hold the "Reduce volume" button, wait until the next screen appears. This is simple, because we reinstall the operating system, the data of the previous system still exists, which causes problems at the time of launch. The solution is to start the recovery mode by turning off the mobile phone and pressing the volume increase keys when we turn it on; As soon as it appears, first select "Reset Factory Reset", then "Wipe the cache partition".
After that we will see the initial configuration. If the reader goes through something like this, be calm and do not get into a state of panic, follow the instructions above. Important note. To prevent this from happening again, we must disable automatic updates.
Prevention of bricks
At this stage, you should give a few tips for the owners of the equipment, so that you no longer need to restore the dead brick android-smartphone.
- Do not put custom shells on Samsung. Usually, after manipulations with third-party shells from enthusiasts, problems arise. The question arises, what to do if the phone does not turn on after the next firmware. Remember, the manufacturer tests the new firmware for months before providing it to the public.
- Bite on the "air". Most manufacturers allow users not to download the firmware. You can update your Samsung device directly from the settings menu. This will protect most people from further probable problems.
conclusions
If the mobile phone does not turn on after firmware, and your computer does not see it, be sure to contact the service. Android is configured to react to the computer even with a "brick". If it does not, then the problem is serious. It is not worth it to repair the microcircuit itself, it is possible to "gobble up" the gadget even more, in this case, the recovery of microcircuits and other modules will cost a lot of money.
Do you want to cancel some modification in any way and would you like to lose all the applications for this? Will you sell the smartphone and do not want your personal data and accounts to go away with the device? You're fucking on your mobile phone, and now you're crying for a solution? There is no reason for panic, maybe the problem is not so serious. Most curious users, at least once, have already made some kind of top bluff on their phone.
In practice, this is a very simple task. In principle, let's demonstrate three simple ways to restore. The first one is very superficial, designated for those who had some problem that did not affect the deepest layers of the system. The second is recommended for those who have done some shit and need to restore absolutely everything, including the original firmware. And the third - for those who have a system failure or very slow.
In all other cases, use recovery and third-party utilities, if after the manual firmware the phone does not turn on. Cellular should return to the factory state.
