Windows 7 Explorer constantly reboots as a fix. Errors of the program "Explorer": what to do with constant restarts? Rollback of the operating system.
This is a file manager, as well as the easiest way to access information on the hard drive. How to get rid of Explorer reload? This question was asked for sure, and so are you. The problem is not unique, and you can solve it if you have the skill and knowledge. But on the way to the solution there are several obstacles.
There can be several reasons for overloading the Explorer.
Method 1 - Check the Startup folder
If there is a shortcut in the "Libraries" folder, go to it and delete it. The second way is to check the registry for a specific key and change it to a different value. Then go to the next key. Now continue and restart your computer and see what happens.
Method 4 - Restore previous folders
Make sure that restoring the previous windows of the folder at logon is not checked.
Method 5 - Delete the registry key
You can either uninstall the program, open it, or install or uninstall the programs you want to have at startup. You can use it to copy, move, rename, and search for files and folders. When you come across a problem, try the solutions below and then the error should be fixed.- The Explorer is almost the only way to navigate the file system of a new computer. Therefore, if the PC is barely bought, to meet with this - get a lot of extra difficulties. Since it's normal to work without Explorer, it's not possible. Another thing is if the computer is installed on a program similar to Total Commander. But a novice user is unlikely to have a need for it.
- Reboot the conductor does not just happen. Be prepared for the fact that, hardly, you have to reinstall it. After all, this behavior can be a consequence of the conflict in the software at a sufficiently deep level.
- Problems with Explorer always insanely irritate the user. Do not solve them and normally work further - just unrealistic. Therefore, having understood, the user literally breathes new life into his computer.
Why does Explorer constantly restart?
There are several main reasons:
Solution 1. This quick and painless solution can work as a charm for you. Solution 2: Change the settings for files and folders. To resolve this issue, change some settings for processing these files. Follow these steps. Make sure that the Always Show Icons, Not Thumbnails option is checked as shown below.
Solution 3: Use the System File Checker tool to scan and scan files. The resulting problem can be caused by a damaged system file. Therefore, to fix this problem, try to check and repair the corrupted system file.
- DLL - libraries contain problems.
- with the configuration of the system.
- The computer is infected with a virus.
- An application is installed in the system that blocks the operation of one or more of its components.
If Windows Explorer 10 is constantly rebooted, the first three reasons are less likely. And that's why - this OS automatically loads current and working hardware drivers. Even if all the drivers are not installed properly, nothing prevents them from downloading from the manufacturer's website. But in the case of old equipment, this possibility may not be available.
As you can see on the screen, the process will take some time until the test is completed 100%. Solution 4: Perform a clean boot. First, and see if there is a problem. If the problem also exists in safe mode, follow these steps to perform a clean boot to find out the root cause of the problem.
This is necessary to run the system setup utility. If the problem is fixed, it is mainly caused by third-party software. Then find out which specific software is causing the problem. Refer to the steps above to enable these disabled services. Continue to do this until you find the group that causes the problem. Then check for suspicious services one by one until you figure out which one is causing the problem.
At the same time, "Ten" contains effective tools to combat viruses "out of the box." These include Microsoft Security Essentials, a program that previously came with Windows only as an option. It turns out that the fourth reason for failures for 10 is more relevant than all the others.
What to do in this case?
After troubleshooting the problem software, remove and reinstall it and check if the problem is resolved. If the problem persists, you may need to uninstall the software. After troubleshooting, do not forget to restart your computer as usual.
Until this day everything worked fine, although it is a relatively older model. But the solutions given in the reports are very messy. More importantly, these things do not work for me. Fortunately, despite the fact that the conductor crashed, the task manager is still working. And you can run the task from there.
What to do in this case?
If you think that the application is to blame, remember - maybe some program reacted incorrectly to actions or caused failures where they should not be? If so, it's best to remove it immediately. After that, try working with Explorer again. Is the problem solved? If yes - excellent. And if not - maybe the cause of the problem was a completely different software. Trying to understand why the conductor constantly restarts, you will sooner or later reach the truth. And this article will help you understand the reason as early as possible.
Step 1: Log in to the "Control Panel"
Here are the steps that solved the problem.
Go to the "System and Security" settings
Step 4: Find the application error log. Find the event level using the "Error". And this should be safely removed. After the removal and reboot, the problem disappeared. This is evidence of old wisdom: "The most difficult thing is to find where to fix it."Operating system rollback
It can be faster. If the file is moved and quick access can not find it, it breaks the explorer. I hope you can use this method to correct your problem. Oh, and this is also a program that you can use to view your files and folders.
The root of the problem
As you know, in order to understand the problem in some structure, it is necessary to consider the constituent parts of it. You need to start with a simple test. The first question is whether this is your problem alone? To get an answer, try to reproduce the failure in another. To do this, simply create an account and run the Explorer.
Defining problematic shell extensions
That's why you can see how the taskbar disappears, and then reappears in a few seconds. Sometimes this does not happen. A new task for creation is called simply a "conductor", and its launch should return to you the taskbar and the Start menu. Unfortunately, there is no hard and fast rule to point out the shell extension and say: "This is the one that causes all the problems." Instead, we need to see what is loaded, and make a few half-formed guesses. Then we just try to disable the extensions that we define, maybe related to the problem.
After that, if the Explorer restarts again, go on to other options. If the problem has disappeared, try making your new account your primary account. It's easy, enough to transfer the files in the named folder (on drive C) to a new folder. Or, Windos herself will suggest that you keep the old files on the disk when you delete the old user. After that, you can safely remove the old, "broken" register.
Windows Explorer - punishment or signal?
Disabling shell extensions is usually safe, but this is a very complex system with which we work here, and there are no guarantees. A full backup is your security network if something goes terribly wrong. First, consider what software you may have recently installed on your machine. In particular, if the problem you are diagnosing is "just beginning," it may be the result of a new installation of something. Finally, often everything is not so clear. Look for patterns. The samples you were looking for somehow related the problem to one of the listed shell extensions, after which you try to disable these shell extensions to make sure that the problem resolved itself. Typically, all that happens is that you lose some functions - often functionality that you never knew existed or was never used.
It can be that Windows Explorer 10 is constantly rebooting on the computer or laptop that you just bought. On most notebook models, there is a way to return to factory settings. Search the system for an application called System Recovery. If it is, it will be much easier to understand the problem. Just use it and follow all suggested instructions.
What to do if you are lazy
If you disable the shell extension, the problem may disappear, you can perform one of two ways. Diagnose, repair, or otherwise "fix" the program to which this shell extension applies. As a rule, the first step is to reinstall, but everything can also be more complicated. At a minimum, you now have a direction to the head and, perhaps, you can contact the software manufacturer support team to get more specific help. Until you skip any functionality provided by the shell, this is a valid approach with one drawback: if this product is updated at some point, the upgrade or reinstallation process can reactivate the shell extension. If not, you may need to re-enter and disable it. 
Leave the shell extension disabled. . Note.
IMPORTANT. If you have a laptop Asus, try to update the proprietary software Asus WebStorage. Does not help - safely remove it.
Other solutions
The cause of the problem is the virus
Are you sure that the fault is virus software? Windows Explorer 10 constantly restarts for several reasons. And this can not be dismissed. There can be several cases here:
Method # 4: Add a shortcut to the Reset Explorer to the context menu
This is a simpler and safer method than the method described above. 
If you constantly need to restart the conductor, it's best to make the process automatic for convenience. 
After selecting in the right pane, you will see the "Default" option. 
Note: if in the future you change the location of the "Restart the Explorer Label" batch file, you will have to copy the new path again and paste it in the "Default" section of the "Command" option. Otherwise, the option in the context menu will stop working.
- The virus "replaced" some of the elements of the Explorer.
- The virus modified the Explorer by changing the way it was launched or by incorporating its parameters into it.
It is worth considering that the virus (adware, malware, spyware) is also a program. Therefore, everything that is written above about other methods of "struggle" is relevant to him.
What else can you try?
Is the problem still unresolved? Well, we can consider one more way. This is the so-called NetWind load. That is, a launching method that does not include any secondary component of the system. Is Windows Explorer continuously rebooting? Then this option will be good. In the case of the "ten", it takes a little effort to start this mode. Try to find it in your system - at the same time you will discover a lot of new things.
Why does Explorer constantly restart?
There are a lot of bugs in the operating system that can drown out performance and even make machines unusable. We will look at 13 common problems and help you fix them. Fortunately, you will not see it as regularly as it was in the past. This means that there is a problem with the driver.
Check out our basic tips and tricks. On the Advanced Boot Options screen, make sure that Safe Mode is selected and press Enter. To solve this problem, open a command prompt and run it as an administrator. Now the activation should be successful.
If the Clean boot does not cause any problems - the whole problem is exactly in one of the installed applications. In fact, to run such a bootloader configuration, you have to disable all the Startup items. You can do this with the help of CCleaner, or similar programs.
What to do if you are lazy
The forums are treated with different questions.
- The mouse does not work, help me.
- The Explorer program restarts, what should I do with Windows 7?
- I have a problem with the motherboard. Which is better to take as a substitute?
- And many others.
This is also suggested to you.
- Download the utility ProcDump to the PC and install it into the root folder of drive C.
- Run the utility.
- Reproduce the problem - make it make itself felt.
- File errors from the utility folder on the popular file exchanger (for example, RGhost).
- Put a link to the specialized forum on computer technology.
Almost all possible ways to solve the problem are given. Very good, if the first one will save you from annoying problems. After reading this article, your problem with rebooting Explorer is solved! Leave your decision in the comments. What helped you in the fight against the problem?
The Explorer.exe system application or the Russian-language version is the main element in the user interface of all operating systems from Microsoft, ending with the latest version of Windows 10. It links between the window interface, the file manager, the taskbar, the Start button and a number of management tools computer. Because of its role, this executable file is constantly exposed to virus attacks and attempts to change from various applications. This is one of the reasons why the conductor begins to glitch. Another reason is manifested after a couple of years of using Windows without periodically cleaning the registry, along with installing a bunch of different games and applications. Reinstall the system is reluctant or there is no time, but it is necessary to work somehow. Here and there are sometimes situations when it is necessary to restart Explorer explorer.exe without restarting the computer. There are three simple ways to do this.
Method 1. Call the Windows Task Manager with the Ctrl + Shift + Esc key combination, expand its full version by clicking on the "Details" button and on the first "Processes" tab find the "Explorer" line. In the English version - Explorer.
Click on it with the right mouse button and select "Restart" in the menu that appears.
Method 2. Press the Ctrl + Shift key on the computer keyboard and right-click on the taskbar. In the menu that appears, select "Exit from Explorer".
After that, the entire Windows interface will disappear, as will the task bar with the start button. Press the key combination Ctrl + Shift + Esc to open the Task Manager.
In the "File" menu we select "Start a new task".
The Create Job window appears.
In it, you need to enter the command: "Explorer" and click on the "OK" button.
This will start Windows Explorer again.
Method 3. Run the command prompt with Administrator rights and enter the command first:
Taskkill / F / IM explorer.exe
This we will forcefully complete the process.
Now to start it again:
Start explorer.exe
If you have to restart the conductor often, you can make a special executable bat-file for this. This is done simply. On the desktop, create a text file with the following content:
Save the file, and then change its extension from.txt to .bat.
Now if you run it for execution, it will restart the Explorer.exe process.
Note: If necessary, you can create a rule for the scheduler and it will do a restart of the Windows Explorer at the time specified in the task.
